[1]
|
Review on natural plant fibres and their hybrid composites for structural applications: Recent trends and future perspectives
|
|
Composites Part C: Open Access,
2022 |
|
|
[2]
|
A review on the multi-scale simulation of Z-pinned composite laminates
|
|
Composite Structures,
2022 |
|
|
[3]
|
Dynamic fracture toughness prediction of fiber/epoxy composites using K-nearest neighbor (KNN) method
|
|
Handbook of epoxy/fiber …,
2022 |
|
|
[4]
|
Influence of moisture absorption on physico-chemical properties of natural fiber-based hybrid composites
|
|
Aging Effects on Natural …,
2022 |
|
|
[5]
|
Delamination and Tensile Effect of Fine z-Binder Reinforced on Fiberglass/Polyester Composite for Aerospace Applications
|
|
Tiburcio, A Lira-Martínez… - Next Generation Fiber …,
2022 |
|
|
[6]
|
Failure Modes in Fiber Reinforced Composites and Fracture Toughness Testing of FRP
|
|
… in Fatigue and Fracture Testing and …,
2022 |
|
|
[7]
|
Manufacturing and Characterization of Continuous Nanofiber-Reinforced Composites
|
|
2022 |
|
|
[8]
|
EXPERIMENTATION FOR FLEXURAL STRENGTH AND FRACTURE TOUGHNESS ON CARBON AND GLASS FIBER SELF-HEALING COMPOSITES WITH …
|
|
… An International Journal,
2021 |
|
|
[9]
|
Fracture Toughness of the Natural Fiber‐Reinforced Composites: A Review
|
|
Mechanical and …,
2021 |
|
|
[10]
|
Preparation and incorporation of multi-functional carbon nano materials into fiber reinforced polymeric composites
|
|
2021 |
|
|
[11]
|
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method
|
|
International Journal of Engineering,
2021 |
|
|
[12]
|
MODE II FRACTURE TOUGHNESS OF HELICAL MULTI-WALLED CARBON NANOTUBE REINFORCED CARBON FIBER/EPOXY COMPOSITES
|
|
The 2nd International …,
2021 |
|
|
[13]
|
Análisis de falla en modo mixto I y II bajo cargas cuasi-estáticas y dinámicas por impacto en un compuesto de reparación aeronáutica
|
|
2021 |
|
|
[14]
|
Influence of Precracking Techniques on Fracture Toughness of Carbon-Carbon Composites
|
|
International Journal of Integrated Engineering,
2021 |
|
|
[15]
|
ModeI fracture toughness of Carbon/glass hybrid comopsite
|
|
Wazery - International Journal of Engineering,
2021 |
|
|
[16]
|
Study of mode II interlaminar fracture toughness of laminated composites of glass and jute fibres in epoxy for structural applications
|
|
Functional …,
2021 |
|
|
[17]
|
Improved mechanical performance and unique toughening mechanisms of UDM processed epoxy‐SiO2 nanocomposites
|
|
Polymer …,
2021 |
|
|
[18]
|
Stack fabric felting to get PCM GIIc improvement and LVI tolerance
|
|
2021 |
|
|
[19]
|
Experimental investigation on Mode-I fracture toughness of Carbon-Carbon composites fabricated by preformed yarn method
|
|
2021 |
|
|
[20]
|
Experimental investigation of mixed mode fracture toughness of glass fiber/epoxy laminates with sea water absorption
|
|
2021 |
|
|
[21]
|
Enhancement of impact toughness and damage behaviour of natural fibre reinforced composites and their hybrids through novel improvement techniques: A critical …
|
|
2021 |
|
|
[22]
|
Estimation of fracture toughness (KIC) using Charpy impact test for Al6061T6 and Al7075T6 alloys subjected to corrosion
|
|
2021 |
|
|
[23]
|
Fracture Characteristics and Energy Dissipation of Textile Bamboo Fiber Reinforced Polymer
|
|
2021 |
|
|
[24]
|
Fracture Toughness of the Natural Fiber-Reinforced Composites: A Review
|
|
2021 |
|
|
[25]
|
FRACTURE RESISTANCE OF COMPOSITE STRUCTURS FROM HEMP BIO-FIBERS
|
|
2021 |
|
|
[26]
|
DETERMINATION OF FRACTURE TOUGHNESS AND STRAIN ENERGY RELEASE RATE FOR BASALT/EPOXY COMPOSITES
|
|
2020 |
|
|
[27]
|
Mechanical behavior and fracture toughness characterization of high strength fiber reinforced polymer textile composites
|
|
2020 |
|
|
[28]
|
THREE-DIMENSIONAL MULTIFUNCTIONAL WOVEN COMPOSITES CONTAINING THROUGH-THICKNESS METAL FILAMENTS
|
|
2020 |
|
|
[29]
|
Experimental and numerical investigation of the effects of porosity on the in-plane shear properties of CFRPs using the V-notched rail shear test method
|
|
2020 |
|
|
[30]
|
Sensor integration within composite structures for continuous load monitoring
|
|
2020 |
|
|
[31]
|
Improvement of interlaminar fracture toughness of phenolic laminates interleaved with electrospun polyvinyl butyral nanofibers
|
|
2020 |
|
|
[32]
|
Mode-I Fracture Toughness Analysis of n-HAPs Filled Dental Restorative Composites
|
|
2020 |
|
|
[33]
|
Nonlinear XFEM Modeling of Mode II Delamination in PPS/Glass Unidirectional Composites with Uncertain Fracture Properties
|
|
2020 |
|
|
[34]
|
A Study of the Interlaminar Fracture Toughness of Unidirectional Flax/Epoxy Composites
|
|
2020 |
|
|
[35]
|
Experimental and Finite Element Analysis of Fracture Parameters of woven Glass/Epoxy Composite
|
|
2020 |
|
|
[36]
|
Experimental Determination of Fracture Toughness of Woven/Chopped Glass Fiber Hybrid Reinforced Thermoplastic Composite Laminates
|
|
2020 |
|
|
[37]
|
Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode (I/II) load using FPB specimen
|
|
Frattura ed Integrità …,
2020 |
|
|
[38]
|
Suppressing Delamination Through Vertically Aligned Carbon Nanotubes (VACNT) Interleaves
|
|
2020 |
|
|
[39]
|
Comprehensive study of unidirectional flax/epoxy composites; an evaluation of material properties and fracture behavior
|
|
2020 |
|
|
[40]
|
Low-Temperature Effects on Sandwich Composites Under Low-Velocity Impact
|
|
2019 |
|
|
[41]
|
Plasma Surface Functionalization of AFP Manufactured Composites for Improved Adhesive Bond Performance
|
|
2019 |
|
|
[42]
|
Determination of mode I dynamic fracture toughness of IM7-8552 composites by digital image correlation and machine learning
|
|
2019 |
|
|
[43]
|
Mode I fracture toughness of fiber-reinforced polymer composites: A review
|
|
2019 |
|
|
[44]
|
Phase structure and fracture toughness of the polyethersulfone-modified bismaleimide resin
|
|
2019 |
|
|
[45]
|
Tailoring interfacial interactions in fiber reinforced polymeric composites by the electrospray deposition of waterborne carbon nanotubes
|
|
2019 |
|
|
[46]
|
An experimental study on interfacial fracture toughness of 3-D printed ABS/CF-PLA composite under mode I, II, and mixed-mode loading
|
|
2019 |
|
|
[47]
|
Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation
|
|
2019 |
|
|
[48]
|
Neuartige amphiphile Blockcopolymere basierend auf kettenverlängerten Polyestern für duromere Anwendungen
|
|
2019 |
|
|
[49]
|
Effect of Fibre Orientation on the Mixed-Mode Fracture Toughness of the Jute Fibre Reinforced Epoxy Composite
|
|
2019 |
|
|
[50]
|
Process-structure-properties of additively manufactured continuous carbon fiber reinforced thermoplastic composite
|
|
2019 |
|
|
[51]
|
Simulazioni numeriche e validazione sperimentale di modelli di Crashworthiness su componenti in tessuto CFRP
|
|
2019 |
|
|
[52]
|
Simultaneous load and structural monitoring of a carbon fiber rudder stock: Experimental results from a quasi-static tensile test
|
|
2019 |
|
|
[53]
|
Toughening and enhancing mechanical and thermal properties of adhesives and glass-fiber reinforced epoxy composites by brominated epoxy
|
|
2019 |
|
|
[54]
|
Experimental Investigations on Failure of Silicon Adhesive in Thermal Protection System
|
|
2018 |
|
|
[55]
|
Tecniche Modellazione FEM per correlazione numerico Sperimentale di Materiali Compositi
|
|
Thesis,
2018 |
|
|
[56]
|
Experimental Investigations of Static and Fatigue Crack Growth in Sandwich Structures with Foam Core and Fiber-Metal Laminates Face Sheets
|
|
2018 |
|
|
[57]
|
Experimental Investigation on Critical Energy Release Rate for an Asymmetric Four Point Bending
|
|
2018 |
|
|
[58]
|
Interlaminar Fracture Properties of Bamboo
|
|
The Fracture Mechanics of Plant Materials,
2018 |
|
|
[59]
|
Fracture Toughness and Shear Strength of the Bonded Interface Between an Aluminium Alloy Skin and a FRP Patch
|
|
Journal of The Institution of Engineers (India): Series C,
2018 |
|
|
[60]
|
Model verification of material properties of wound composite rods in tensile loading
|
|
Journal of Industrial Textiles,
2018 |
|
|
[61]
|
Experimental and micromechanical modeling of fracture toughness: MWCNT-reinforced polypropylene/glass fiber hybrid composites
|
|
Journal of Thermoplastic Composite Materials,
2018 |
|
|
[62]
|
Studies on the performance of multi-phased carbon/epoxy composites with nanoclay and multi-walled carbon nanotubes
|
|
Multiscale and Multidisciplinary Modeling, Experiments and Design,
2018 |
|
|
[63]
|
Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques
|
|
2018 |
|
|
[64]
|
Influence of fibre orientation and thickness on the response of CFRP composites subjected to high velocity impact loading
|
|
Advances in Materials and Processing Technologies,
2018 |
|
|
[65]
|
Effect of deoxidation process on inclusion and fatigue performance of spring steel for automobile suspension
|
|
Metallurgical and Materials Transactions B,
2018 |
|
|
[66]
|
Intra-Laminar Fracture Toughness of Glass Fiber Reinforced Polymer By Using Theory, Experimentation and FEA
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
[67]
|
Nanowire Reinforcements for Improving the Interlaminar Properties of Textile Composites
|
|
Blast Mitigation Strategies in Marine Composite and Sandwich Structures,
2018 |
|
|
[68]
|
Studies on Fracture Features and Fracture Toughness of CFRP Composites Fabricated by Resin Infusion Technique
|
|
Advances in Structural Integrity,
2018 |
|
|
[69]
|
The attenuation of ultrasonic vibrations in polymers and polymer composites, minimal dimensions of the determining defects
|
|
2018 |
|
|
[70]
|
이종 복합소재 접합 적용에 따른 Hat-type 구조물의 구조해석에 관한 연구
|
|
2018 |
|
|
[71]
|
Additive Manufacturing with Carbon Nanotube Enriched Acrylonitrile Butadiene Styrene
|
|
2018 |
|
|
[72]
|
Design of composite structures using advanced numerical tools
|
|
Manufacturing Technology,
2018 |
|
|
[73]
|
ANOVA and Response Surface Methodology for the Optimization of Fracture Toughness parameters on Jute Fabric-Epoxy composites using SENB specimens
|
|
Materials Today …,
2017 |
|
|
[74]
|
Mode I Intralaminar Fracture Toughness in Carbon Fibre Rein-forced Polyvinylidene Fluoride (PVDF)
|
|
THE 5th STUDENT SYMPOSIUM ON MECHANICAL AND MANUFACTURING ENGINEERING,
2017 |
|
|
[75]
|
Synthesis and Flexural Strength of Carbon Fiber Reinforced Epoxy Matrix Composite
|
|
International Journal for Research in Applied Science & Engineering Technology (IJRASET),
2017 |
|
|
[76]
|
Natural fiber textile composite engineering
|
|
2017 |
|
|
[77]
|
Testing Methods for Composite Materials
|
|
2017 |
|
|
[78]
|
A review on mode-I interlaminar fracture toughness of fibre reinforced composites
|
|
Journal of Physics: Conference Series,
2017 |
|
|
[79]
|
Experimental Investigations on Fracture Toughness of Sandwich Beams with Foam Core and FML face sheets
|
|
11TH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY,
2017 |
|
|
[80]
|
Weak bond detection in composites using highly nonlinear solitary waves
|
|
Smart Materials and Structures,
2017 |
|
|
[81]
|
Experimental study on mode I fracture of fibredux unidirectional prepeg
|
|
AIP Conference Proceedings,
2017 |
|
|
[82]
|
Evaluating Embedded Heater Bonding for Composites
|
|
2017 |
|
|
[83]
|
Determination of mode I & II strain energy release rates in composite foam core sandwiches. An experimental study of the composite foam core interfacial fracture …
|
|
Composites Part B: Engineering,
2017 |
|
|
[84]
|
MODE II+ III DELAMINATION BEHAVIOUR OF FLAX FABRIC REINFORCED POLYMER COMPOSITE
|
|
Thesis,
2017 |
|
|
[85]
|
NATURAL & APPLIED SCIENCES
|
|
2017 |
|
|
[86]
|
Neue Harzsysteme für Faserverbundwerkstoffe
|
|
2017 |
|
|
[87]
|
The Effect of Particle Size and Functionalisation on Electro-thermo-mechanical Properties of Graphene-enhanced Epoxy and Carbon Fibre Epoxy Nano-Composites
|
|
Thesis,
2017 |
|
|
[88]
|
Investigation of fatigue failure in composite versus steel coiled tube for application in mine site drilling
|
|
2017 |
|
|
[89]
|
Flexural strength of polypropylene fiber reinforced PMMA
|
|
2017 |
|
|
[90]
|
Low-velocity impact performance of carbon fiber-reinforced plastics modified with carbon nanotube, nanoclay and hybrid nanoparticles
|
|
Journal of Reinforced Plastics and Composites,
2017 |
|
|
[91]
|
EVALUATION OF STRAIN ENERGY RELEASE RATE OF EPOXY GLASS FIBRE LAMINATE (MODE-I)
|
|
2017 |
|
|
[92]
|
Determination of Mode-I Fracture Toughness of Epoxy-Glass Fibre Composite Laminate
|
|
Procedia Engineering,
2017 |
|
|
[93]
|
Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites
|
|
Composite Structures,
2017 |
|
|
[94]
|
Flexural Strength of Poly Propylene Fiber Reinforced PMMA
|
|
International Journal of Pharmaceutical Science Invention,
2017 |
|
|
[95]
|
An experimental investigation of multi-functional z-pinned carbon-epoxy composites
|
|
2016 |
|
|
[96]
|
Studies on effect of pre-crack length variation on Inter-laminar fracture toughness of a Glass Epoxy laminated composite
|
|
IOP Conference Series: Materials Science and Engineering,
2016 |
|
|
[97]
|
ТРЕЩИНОСТОЙКОСТЬ СЛОИСТЫХ ПОЛИМЕРНЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ (обзор)
|
|
2016 |
|
|
[98]
|
Deformación y fractura de una resina epóxica reforzada con fibra de algodón
|
|
2016 |
|
|
[99]
|
Structural health monitoring of carbon-material-reinforced polymers using electrical resistance measurement
|
|
International Journal of Precision Engineering and Manufacturing Manufacturing-Green Technology,
2016 |
|
|
[100]
|
Nanowire reinforcement of woven composites for enhancing interlaminar fracture toughness
|
|
2016 |
|
|
[101]
|
Delamination fracture toughness of UHMWPE fibers/polyurethane laminates interleaved with carbon nanotube‐reinforced polyurethane films
|
|
Polymers for advanced technologies,
2016 |
|
|
[102]
|
A new method for testing composite materials under mode III fracture
|
|
Journal of Composite Materials,
2016 |
|
|
[103]
|
Improved Mode I fracture resistance of CFRP composites by reinforcing epoxy matrix with recycled short milled carbon fibre
|
|
Construction and Building Materials,
2016 |
|
|
[104]
|
Environmental aging effect on interlaminar properties of graphene nanoplatelets reinforced epoxy/carbon fiber composite laminates
|
|
Journal of Reinforced Plastics and Composites,
2016 |
|
|
[105]
|
Analysis of Particle Influence on Energy Release Rate of CSM E-Glass/Epoxy Composite Laminates
|
|
2016 |
|
|
[106]
|
Fracture characterization of polymer composites
|
|
2016 |
|
|
[107]
|
Determination of Stress Intensity Factor of Banana Fibre Reinforced Hybrid Polymer Matrix Composite Using Finite Element Method
|
|
Periodica Polytechnica Mechanical Engineering,
2016 |
|
|
[108]
|
Kelakuan delaminasi komposit laminat hibrid anyaman gentian mengkuang/gentian asli sutera/epoksi
|
|
2016 |
|
|
[109]
|
Composite Failures: A Comparison of Experimental Test Results and Computational Analysis Using XFEM
|
|
2016 |
|
|
[110]
|
Mode II delamination of woven mengkuang fiber/woven silk laminated hybrid composites
|
|
2016 |
|
|
[111]
|
NUMERICAL AND EXPERIMENTAL STUDY OF THE MODE І INTERLAMINAR FAILURE OF CHOPPED CARBON FIBER TAPE REINFORCED …
|
|
2016 |
|
|
[112]
|
Numerical and experimental study of the mode i interlaminar failure of chopped carbon fiber tape reinforced thermoplastics
|
|
2016 |
|
|
[113]
|
An experimental investigation of multi-functional z-pinned carbonepoxy composites
|
|
2016 |
|
|
[114]
|
Interfacial properties in the CFRP and CFRP-Ti composites under hygrothermal conditions
|
|
2016 |
|
|
[115]
|
Interfacial properties in the CFRP and CFRP‑Ti composites under hygrothermal conditions
|
|
Doctoral thesis, Nanyang Technological University, Singapore,
2016 |
|
|
[116]
|
Developing Short Milled Carbon Fibre Modified Toughened Epoxy Matrix for Superior and Inexpensive infrastructural CFRP Laminates
|
|
2016 |
|
|
[117]
|
Tough natural-fibre composites
|
|
2015 |
|
|
[118]
|
A Computational Modeling Approach of Fracture-Induced Acoustic Emission
|
|
2015 |
|
|
[119]
|
Weak bond detection in composites using solitary waves
|
|
2015 |
|
|
[120]
|
A methodology to assess damage tolerance of composite structures by fea simulation technique
|
|
2015 |
|
|
[121]
|
Mode II Fracture toughness of Thin Film Epoxy Modified with Nano-Block Copolymers
|
|
2015 |
|
|
[122]
|
Viability Of A Rapid Temporary Repair Of Composite Sandwich Panels
|
|
2015 |
|
|
[123]
|
Рудштейн Роман Ильич
|
|
2015 |
|
|
[124]
|
Finite-Element Modeling of a Damaged Pipeline Repaired Using the Wrap of a Composite Material
|
|
Mechanics of Composite Materials,
2015 |
|
|
[125]
|
On the Processing and Properties of Clay/Polymer Nanocomposites CPNC
|
|
Latin American Journal of Solids and Structures, an ABCM Journal,
2015 |
|
|
[126]
|
Synthesis and characterization of a biocomposite derived from banana plants (Musa cavendish)
|
|
2015 |
|
|
[127]
|
Unidirectional Cordenka Fibre-Reinforced Furan Resin Full Biocomposite: Properties and Influence of High Fibre Mass Fraction
|
|
Journal of Composites,
2015 |
|
|
[128]
|
Modeling Unidirectional Composite Laminates Using XFEM
|
|
2015 |
|
|
[129]
|
Optimization of interlaminar shear strength behavior of anodized and unanodized ARALL composites fabricated through VARTM process
|
|
International Journal of Material Forming,
2015 |
|
|
[130]
|
Методы определения межслоевой трещиностойкости слоистых материалов
|
|
2015 |
|
|
[131]
|
Mixed Mode (I-II) Delamination Fracture Criteria for IM7-G/8552 Intermediate Modulus Carbon/Epoxy Composite Laminate
|
|
ProQuest Dissertations Publishing,
2014 |
|
|
[132]
|
A mixed-mode (I-II) fracture criterion for AS4/8552 carbon/epoxy composite laminate
|
|
ProQuest Dissertations Publishing,
2014 |
|
|
[133]
|
DELAMINATION BEHAVIOUR AND EXPERIMENTAL VALIDATION OF GLASS FABRIC/EPOXY MATRIX AND CARBON FABRIC/EPOXY COMPOSITES IN MODE-1 LOADING
|
|
Mechanical Engineering: An International Journal ,
2014 |
|
|
[134]
|
Road Map for the Selection of Characteristic Parameters of Polymer Matrix Composites for Engineering Applications
|
|
JF Rahman, M Yunus, TMT Yezdani, A Ramakrishna - ijetae.com,
2014 |
|
|
[135]
|
Assessment and Modification Strategies for Improved Interlaminar Properties of Advanced FRP Composites: A Review
|
|
Journal of Advanced Research in Manufacturing, Material Science & Metallurgical Engineering,
2014 |
|
|
[136]
|
Flexural Strength of E-glass-reinforced PMMA
|
|
International Journal of Experimental Dental Science,
2014 |
|
|
[137]
|
Development and characterization of fatigue resistant Aramid reinforced aluminium laminates (ARALL) for fatigue Critical aircraft components
|
|
IOP Conference Series: Materials Science and Engineering. IOP Publishing,
2014 |
|
|
[138]
|
Mode-I Fracture Analysis of Thermally Aged of Glass and Glass-Carbon Hybrid Composites
|
|
image,
2014 |
|
|
[139]
|
Testing of Polymeric Materials
|
|
2014 |
|
|
[140]
|
Novel experimental techniques for characterization of engineering materials with applications
|
|
2014 |
|
|
[141]
|
DCB Interlaminar Fracture Toughness of Glass Fiber/Modified Epoxy Nano Composite Laminates
|
|
International Journal for Scientific Research & Development,
2014 |
|
|
[142]
|
Gerichtet erstarrte Schichtstrukturen mit hierarchischem Aufbau
|
|
2014 |
|
|
[143]
|
An experimental study on the interfacial characteristics of fiber reinforced polymeric composites enhanced with nano-scale materials
|
|
2014 |
|
|
[144]
|
Study on the Mode I Interlaminar Fracture Toughness of Multi-Directional Composite Laminates
|
|
Advanced Materials Research,
2013 |
|
|
[145]
|
PMMA, Impact strength, Silane treated E glass fiber.
|
|
IMPACT STRENGTH OF E-GLASS REINFORCED PMMA,
2013 |
|
|
[146]
|
IMPACT STRENGTH OF E-GLASS REINFORCED PMMA
|
|
M Mathew, K Shenoy, KS Ravishankar - jemds.com,
2013 |
|
|
[147]
|
Modeling of delamination in carbon/epoxy composite laminates under four point bending for damage detection and sensor placement optimization
|
|
NULL
2013 |
|
|
[148]
|
Characterization of mode I disbonding behaviour of carbon/epoxy composites bonded with two adhesion qualities
|
|
2013 |
|
|
[149]
|
Nonlinear XFEM modeling of delamination in fiber reinforced composites considering uncertain fracture properties and effect of fiber bridging
|
|
NULL
2013 |
|
|
[150]
|
Mode II interlaminar fracture properties of Moso bamboo
|
|
Composites Part B: Engineering,
2013 |
|
|
[151]
|
Damage quantification in fiber reinforced polymer composites using a hybrid non-destructive testing approach
|
|
NULL
2012 |
|
|
[152]
|
Advanced Materials and Manufacturing (AMM) Research Group, School of Mechanical and Design Engineering, University of Portsmouth, Anglesea Road …
|
|
|
|
|
[153]
|
KATONAI MŰSZAKI DOKTORI ISKOLA
|
|
|
|
|