[1]
|
Aluminum metal composites primed by fused deposition modeling-assisted investment casting: Hardness, surface, wear, and dimensional properties
|
|
Proceedings of the …,
2022 |
|
|
[2]
|
Workability Studies on Al6061 Alloy and Al6061 Metal Matrix Composites Reinforced with Silicon Carbide Particles Under Cold Backward Extrusion
|
|
Journal of The Institution …,
2022 |
|
|
[3]
|
Statistical investigation of the machining of aluminum LM-25/SiC metal matrix composite
|
|
Materials Today: Proceedings,
2022 |
|
|
[4]
|
Turning of Aluminium Composites: Characteristics and Future Prospects
|
|
IOP Conference Series: Materials Science …,
2022 |
|
|
[5]
|
Machinability Studies on Hybrid Aluminum Metal Matrix Composites
|
|
IOP Conference Series: Materials …,
2022 |
|
|
[6]
|
Machining Studies of Basalt Fiber Reinforced Aluminium Metal Matrix Composites Using Abrasive Jet Machining
|
|
Functional …,
2022 |
|
|
[7]
|
Optimization of Wire Cut Electric Discharge Machining Characteristics of Hybrid Aluminium Composites (Al6061/Gr/SiCp) Using Taguchi Method
|
|
… Machining Strategies for …,
2022 |
|
|
[8]
|
Effect of ZrB2 Nano-Ingredient on Uncoated Tool Wear for Aluminum Alloys-Based Metal Matrix Composite
|
|
Innovations in Mechanical Engineering,
2022 |
|
|
[9]
|
Analysis of Effect of Processing Factors on Surface Roughness and Sintered Density of Powder Metallurgy Composites
|
|
Current Advances in …,
2021 |
|
|
[10]
|
Effect of Cutting Parameters on Surface Roughness of LM2 (Al-9% Si)–Al2O3 Metal Matrix Composite fabricated by Squeeze Casting Method
|
|
2021 |
|
|
[11]
|
Hybrid reinforced aluminum matrix composites fabricated by selective laser melting
|
|
2021 |
|
|
[12]
|
Statistical Optimization by Response Surface Methodology of Process Parameters During the CNC Turning Operation of Hybrid Metal Matrix Composite
|
|
2021 |
|
|
[13]
|
Influence of processing conditions and issues in Machining of aluminum metal matrix composites
|
|
2021 |
|
|
[14]
|
Addition of Beryl Content to Aluminum 2024 Alloy Influencing the Slide Wear and Friction Characteristics
|
|
2021 |
|
|
[15]
|
Multi-objective Optimization of Turning Parameters for SiC-or Al 2 O 3-Reinforced Aluminum Matrix Composites
|
|
2021 |
|
|
[16]
|
Mechanical, tribological and microstructural characterization of stir cast Al-6061 metal/matrix composites—a comprehensive review
|
|
2021 |
|
|
[17]
|
Experimental investigation of machinability in laser-assisted machining of aluminum-based nanocomposites
|
|
Journal of Materials Research …,
2021 |
|
|
[18]
|
Investigation of the tool wear, surface roughness, and chip formation in the machining of ZrO 2-reinforced aluminum composites
|
|
2020 |
|
|
[19]
|
Investigation of the Effect on Copper and Silicon Additives on Machinability in Turning of Al-25Zn Alloy with CVD-Al2O3 Coated Tools
|
|
2020 |
|
|
[20]
|
Improvement the Bar Bow of Al2O3-TiC Thinner Bar in High Precision of Grinding and Cutting Processes
|
|
2020 |
|
|
[21]
|
Assessment of Surface Roughness in EDM of RHA, Cu and Mg Reinforced Hybrid MMC using L27 Taguchi's Orthogonal Array
|
|
2020 |
|
|
[22]
|
Automotive industry application of aluminium-based hybrid metal matrix composite
|
|
2020 |
|
|
[23]
|
3D Visualization and Topographical Analysis in Turning of Hybrid MMC By CNC Lathe SPRINT 16TC Made of BATLIBOI
|
|
2020 |
|
|
[24]
|
Experimental Investigation on Microstructural and Wear Behaviour of Dual Reinforced Particles (DRP) Aluminium Alloy Composites
|
|
2020 |
|
|
[25]
|
Bakır ve Silisyum İlavelerinin Al-25Zn Alaşımının CVD Al2O3 Kaplamalı Takımlarla Tornalanmasında İşlenebilirliğe Etkisinin İncelenmesi
|
|
2020 |
|
|
[26]
|
Parametric Optimization of Rice Husk Ash, Copper, Magnesium reinforced Aluminium Matrix hybrid Composite processed by EDM
|
|
2019 |
|
|
[27]
|
Study of Peripheral Milling of Magnesium Matrix Composite
|
|
2019 |
|
|
[28]
|
Influence of rice husk ash, Cu, Mg on the mechanical behaviour of Aluminium Matrix hybrid composites
|
|
2019 |
|
|
[29]
|
Study on Microstructure and EDAX Analysis of Al/SiC/Gr Hybrid Metal Matrix Composites
|
|
2019 |
|
|
[30]
|
Investigation of cutting tool wear behaviors in machining of silicon carbide and magnesium oxide reinforced aluminum 2024 matrix composites
|
|
2019 |
|
|
[31]
|
EVALUATION OF MACHINING PARAMETERS & SURFACE ROUGHNESS OF AL4600/SIC METAL MATRIX COMPOSITE BY TAGUCHI EXPERIMENTAL …
|
|
2019 |
|
|
[32]
|
Parametric Study During Abrasive Water Jet Turning of Hybrid Metal Matrix Composite
|
|
Advances in Manufacturing Engineering and Materials,
2019 |
|
|
[33]
|
A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
|
|
2018 |
|
|
[34]
|
Optimization of Process Parameters of 16-TC Botliboi CNC During Machining of Hybrid Metal Matrix Composites
|
|
2018 |
|
|
[35]
|
Surface Integrity analysis of Wire-EDM on in-situ hybrid composite A359/Al2O3/B4C
|
|
2018 |
|
|
[36]
|
Aluminium Composites Fabrication Technique and Effect of Improvement in Their Mechanical Properties–A Review
|
|
2018 |
|
|
[37]
|
Aluminium metal matrix composites: A retrospective investigation
|
|
2018 |
|
|
[38]
|
A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
|
|
"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY",
2018 |
|
|
[39]
|
Optimization of Machining Parameters for CNC Turning of Al/Al2O3 MMC Using RSM Approach
|
|
Materials Today: Proceedings,
2018 |
|
|
[40]
|
An Investigation into Orthogonal and Oblique Cutting Processes
|
|
2018 |
|
|
[41]
|
A COMPARATIVE STUDY ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF ALUMINUM ALLOY AND THE MMC
|
|
International Journal of Research Sciences and Advanced Engineering [IJRSAE],
2017 |
|
|
[42]
|
Performance investigation of aluminum 6061 metal matrix composite
|
|
2017 |
|
|
[43]
|
Experimental Investigation of Peripheral Milling of Functionally Gradient Al-SiC Metal Matrix Composite
|
|
2017 |
|
|
[44]
|
Machining Investigation on Hybrid Metal Matrix Composites-A Review
|
|
Materials Today: Proceedings,
2017 |
|
|
[45]
|
Experimental Studies on Influence of Redmud on Thrust force and Surface Roughness of Novel Al6061 Hybrid Composites
|
|
2017 |
|
|
[46]
|
Sustainable End Milling of Difficult-Materials
|
|
2017 |
|
|
[47]
|
COMPARISONS OF PARAMETERS IN ELE MACHINING OF ALU HYBRID NANO METAL M
|
|
International Journal of Mechanical Engineering and Technology,
2017 |
|
|
[48]
|
Optimization of Machining Parameters in CNC Turning of Hybrid Metal Matrix Composites Using Different Techniques: A Review
|
|
2017 |
|
|
[49]
|
A review on the intensification of metal matrix composites and its nonconventional machining
|
|
Science and Engineering of Composite Materials,
2016 |
|
|
[50]
|
Experimental Investigation and Optimization of Machining Parameters using Grey-Relational Analysis Approach and Fuzzy Based Taguchi Loss Function Method
|
|
2016 |
|
|
[51]
|
FABRICATION OF HYBRID MMCS AND THEIR FUTURE SCOPE–A REVIEW
|
|
International Research Journal of Engineering and Technology,
2016 |
|
|
[52]
|
Effect of HSS and Tungsten Carbide Tools on Surface Roughness of Aluminium Alloy during Turning Operation
|
|
2016 |
|
|
[53]
|
Manufacturing of aluminium nano hybrid composites: a state of review
|
|
IOP Conference Series: Materials Science and Engineering,
2016 |
|
|
[54]
|
ALUMINIUM MATRIX HYBRID COMPOSITES: A REVIEW OF DIFFERENT REINFORCEMENTS ON MECHANICAL AND TRIBOLOGICAL CHARACTERISTICS
|
|
International Journal of Exploring Emerging Trends in Engineering,
2016 |
|
|
[55]
|
Tool Wear Analysis of Al 6061 Reinforced with 10 wt% Al2O3 Using High Hardened Inserts
|
|
Applied Mechanics and Materials,
2015 |
|
|
[56]
|
Aluminium Metal Matrix composite–an insight into solid state and liquid state processes
|
|
2015 |
|
|
[57]
|
Studies on machining parameters while milling particle reinforced hybrid (Al6061/Al2O3/Gr) MMC
|
|
Journal of Environmental Science and Health, Part A: Toxic/Hazardous Substances and Environmental Engineering,
2015 |
|
|
[58]
|
Contributions to understanding the high speed machining effects on aeronautic part surface integrity
|
|
2015 |
|
|
[59]
|
Study of Cutting force and Surface Roughness in machining of Al alloy Hybrid Composite and Optimized using Response Surface Methodology
|
|
Procedia Engineering,
2014 |
|
|
[60]
|
Electro Discharge Machining Of Hybrid Aluminum Metal Matrix Composite By Using Taguchi Method
|
|
2014 |
|
|
[61]
|
Machining of Sic—metal matrix composite (MMC) by polycrystalline diamond (PCD) tools and effect on quality of surface by changing machining parameters
|
|
2014 |
|
|
[62]
|
Fabrication of Aluminium Composite Using Stir Casting Process and Optimization of Machining Parameters
|
|
Asian Review of Mechanical Engineering,
2014 |
|
|
[63]
|
Analysis of Looped Water Distribution Network with Different Head Loss Formula
|
|
2014 |
|
|
[64]
|
Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651
|
|
Materials,
2014 |
|
|
[65]
|
Hybrid aluminium metal matrix composite reinforced with SiC and TiB2
|
|
2014 |
|
|
[66]
|
Effects of in-Situ TiC Reinforcements on the Machining Process Characteristics of Al+ 12Si Matrix
|
|
2014 |
|
|
[67]
|
Исследование обрабатываемости точением дисперсно-упрочненных алюмоматричных композиционных материалов
|
|
2014 |
|
|
[68]
|
Optimization of the machining parameters for surface roughness during turning of Al/SiC/Gr Hybrid MMC
|
|
2013 |
|
|
[69]
|
Optimization of the machining parameters for surface roughness during turning of Al/SiC/Gr Hybrid MMC.
|
|
2013 |
|
|
[70]
|
Optimization of Tool Shape and Size in EDM of Al Alloy Metal Matrix Composites.
|
|
International Journal of Applied Engineering Research,
2013 |
|
|
[71]
|
Optimization of Surface Roughness and Vibration in Turning of Aluminum Alloy AA2024 Using Taguchi Technique
|
|
International Journal of Mechanical, Industrial Science and Engineering,
2013 |
|
|
[72]
|
ANN Based Surface Roughness Prediction In Turning Of AA 6351
|
|
KM Naidu, SR Rao - Citeseer,
2013 |
|
|
[73]
|
Characteristics of Aluminum Hybrid Composites
|
|
International Journal of Materials and Metallurgical Engineering,
2012 |
|
|
[74]
|
ВЛИЯНИЕ РЕЖИМОВ АЛМАЗНОГО ТОЧЕНИЯ И СОСТАВА МЕТАЛЛОМАТРИЧНЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ НА КАЧЕСТВЕННЫЕ …
|
|
2012 |
|
|
[75]
|
A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites
|
|
Procedia Engineering,
2012 |
|
|
[76]
|
Review on Effect Shape and Size on Al Alloy Metal Matrix Composites in EDM of Tool
|
|
|
|
|