[1]
|
Tribological behaviour of LM25 hybrid metal matrix composites by using Taguchi's techniques
|
|
Materials Today: Proceedings,
2022 |
|
|
[2]
|
Optimization of Abrasive Wear Parameters of Halloysite Nanotubes Reinforced Silk/Basalt Hybrid Epoxy Composites using Taguchi Approach.
|
|
Tribology in Industry,
2022 |
|
|
[3]
|
Effect of dry sliding wear parameters on the specific wear rate of α-MnO2-epoxy nanocomposites
|
|
Proceedings of the …,
2022 |
|
|
[4]
|
Sustainable Development of Agro-Industrial Waste-Based Banana Fiber/Fly Ash Polyester Composites for Wear and Friction Study
|
|
Journal of Natural Fibers,
2022 |
|
|
[5]
|
Taguchi approach for comparative optimization of tribological behavior of glass fabric reinforced epoxy composite with and without graphene-nano platelets filler
|
|
Materials Today: Proceedings,
2022 |
|
|
[6]
|
Vibration and tribological properties of epoxy-granite composites used as novel foundations for machine elements
|
|
Journal of Polymer …,
2022 |
|
|
[7]
|
Dry Sliding Wear Behaviour of Epoxy/Biochar Composites
|
|
Transactions of the …,
2022 |
|
|
[8]
|
Tribological hybrid materials
|
|
Surface Engineering,
2022 |
|
|
[9]
|
Evaluation of mechanical and wear properties of AA6063/(Si3N4) 6%–12%/(CuN2O6) 2%–4% composite via PM route and optimization through robust design …
|
|
2022 |
|
|
[10]
|
Acoustic Isolation behavior of Composite Materials reinforced by natural filler using Robust Design
|
|
Solid State …,
2021 |
|
|
[11]
|
Tribological characterization of pultruded hybrid glass-jute fibre reinforced plastic composites from room temperature to 75° C
|
|
World Journal of Engineering,
2021 |
|
|
[12]
|
Effect of Span Length on Flexural Strength of Glass Fiber Reinforced Polymer Matrix Composite
|
|
2021 |
|
|
[13]
|
Review on history and characterization of polymer composite materials
|
|
2021 |
|
|
[14]
|
Statistical Determination of Mechanical Properties of AL-Filled Glass/Polyester Sandwich Panel under Impact Loading
|
|
2021 |
|
|
[15]
|
Study of Tribological Behavior of GFRP Hybrid Composite Using Fly-Ash and Graphite as Filler Material
|
|
2021 |
|
|
[16]
|
Investigation on Effect of Industrial Waste on Tribological Properties of Polymer Composites
|
|
2021 |
|
|
[17]
|
Evaluation of Corrosion Properties of Al2O3 and SiC Reinforced Aluminium Metal Matrix Composites Using Taguchi's Techniques
|
|
2021 |
|
|
[18]
|
Tribological Properties of Fly Ash Blended Polymer Composites
|
|
2021 |
|
|
[19]
|
Effect of Natural Fillers on the Tensile and Flexural Properties of PMMA used in Denture Manufacture
|
|
2021 |
|
|
[20]
|
Effect of Nanofly Ash as Lubricant Additive on the Tribological Properties of SAE 10W-30 Oil: A Novel Finding
|
|
2020 |
|
|
[21]
|
Mechanical Performance of HDPE/UHMWPE Hybrid Composites and Tribological Characterization using Taguchi Method
|
|
2020 |
|
|
[22]
|
Tribological properties of carbon-reinforced epoxy composites-A review
|
|
2020 |
|
|
[23]
|
Improved Wear Rate Resistance, Compression Strength and Hardness of Polymethylmethacrylate Resin with Orange Peel Powder for Artificial Denture Base
|
|
2020 |
|
|
[24]
|
Response surface methodology based on polyamide incorporated with biolubricant for optimisation of operating parameters in heavy vehicles
|
|
2020 |
|
|
[25]
|
DEVELOPMENT OF NANO-ADDITIVE LUBRICANTS TO ENHANCE TRIBOLOGICAL PROPERTIES OF AISI 4140 STEEL
|
|
2020 |
|
|
[26]
|
Experimental Study on Silicon Carbide Composite Laminated Plates
|
|
2019 |
|
|
[27]
|
Assessment Of Solid Particle Erosive Wear Of Glass Reinforced Epoxy Hybrid Composites Using Taguchi Approach
|
|
2019 |
|
|
[28]
|
Synthesis of Al LM25/TiB2 in-situ composites and investigation of its adhesive wear behavior
|
|
2019 |
|
|
[29]
|
Investigation on sliding wear behaviour of UHMWPE filled basalt epoxy composites
|
|
2019 |
|
|
[30]
|
Effect of Fiber Orientation on the Flexural Properties of Glass Fiber Reinforced, Epoxy-Matrix Composite
|
|
2019 |
|
|
[31]
|
Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification
|
|
2019 |
|
|
[32]
|
A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
|
|
"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY",
2018 |
|
|
[33]
|
Fabrication and Tribological Behavior of Epoxy Hybrid Composites
|
|
Synthesis and Tribological Applications of Hybrid Materials,
2018 |
|
|
[34]
|
A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
|
|
2018 |
|
|
[35]
|
Characterization of palm slag/waste tire dust reinforced polyester brake pad composite
|
|
AIP Conference Proceedings,
2018 |
|
|
[36]
|
Υβριδικά συστήματα πολυμερικής μήτρας με μικρο-και νανο-πληρωτές άνθρακα
|
|
2018 |
|
|
[37]
|
Failure Detection Method of Polymer Composite Gears
|
|
Mechanics, Materials Science & Engineering,
2017 |
|
|
[38]
|
Study of Wear Behavior of Aluminum based MMCs using Taguchi Methods
|
|
International Journal of Research and Scientific Innovation (IJRSI),
2017 |
|
|
[39]
|
FABRICATION AND CHARECTERIZATION OF MULTILAYER GFRP COMPOSITES WITH DIFFERENT ORIENTATIONS
|
|
2017 |
|
|
[40]
|
Study on the Preparation and Tribological Properties of Fly Ash as Lubricant Additive for Steel/Steel Pair
|
|
Tribology Letters,
2017 |
|
|
[41]
|
Mechanical Properties Investigation of Composite Material Under Different Parameters Variations
|
|
Al-Khwarizmi Engineering Journal,
2017 |
|
|
[42]
|
Study of Wear Behavior of Aluminum Based MMCs using Taguchi Method
|
|
International Journal of Research and Scientific …,
2017 |
|
|
[43]
|
SOME STUDIES ON TRIBOLOGICAL AND CORROSION BEHAVIOUR OF COPPER FLY ASH COMPOSITE
|
|
2017 |
|
|
[44]
|
Study of the elastic behavior of synthetic lightweight aggregates (SLAs)
|
|
ProQuest Dissertations Publishing,
2016 |
|
|
[45]
|
Effect of Fly-Ash on Thermal & Mechanical Properties of Polystyrene Fly-Ash Composites
|
|
IJSRD -International Journal for Scientific Research & Development,
2016 |
|
|
[46]
|
Significance of Energy Absorbing Layer in GFRP Composite on Flexural Response
|
|
2016 |
|
|
[47]
|
Effect of Inorganic Fillers on the Friction Properties of Polyamide 66
|
|
2016 |
|
|
[48]
|
Effect of Particulate Fillers on the Mechanical, Thermal, Moisture and Fire Performance of Unsaturated Isopthallic Polyester/Glass Fibre Reinforced Polymer …
|
|
2015 |
|
|
[49]
|
MECHANICAL AND TRIBOLOGICAL CHARATERISTICS OF CENOSPHERE PARTICLATES FILLED E-GLASS FIBER REIFORCED VINYLESTER COMPOSITES USING TAGUCHI METHOD AND ANN
|
|
AGU International Journal of Engineering & Technology,
2015 |
|
|
[50]
|
Notice of Retraction A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite
|
|
2015 |
|
|
[51]
|
Analysis of abrasive wear behavior of PTFE composite using Taguchi's technique
|
|
Cogent Engineering,
2015 |
|
|
[52]
|
Effect of Particulate Fillers on the Mechanical, Thermal, Moisture and Fire Performance of Unsaturated Isopthallic Polyester/Glass Fibre Reinforced Polymer Composites
|
|
polymer,
2015 |
|
|
[53]
|
Investigation and Evaluation of Wear Characteristics of A Nonmetallic Spur Gear
|
|
Trends in Machine design,
2015 |
|
|
[54]
|
Studies on Physical and Mechanical Properties of Silica Fume-Filled Nylon 66 Polymer Composites for Mechanical Components.
|
|
Polymers & Polymer Composites,
2015 |
|
|
[55]
|
A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite
|
|
Electrical, Electronics, Signals, Communication and Optimization (EESCO), 2015 International Conference on,
2015 |
|
|
[56]
|
Wear Characteristics of Polymer-Based Composites
|
|
Mechanics of Composite Materials,
2015 |
|
|
[57]
|
Investigation Of Mechanical Behaviour And Tribological Properties Of Coir And Sugarcane Bagasse Fibers Filled Epoxy Composites
|
|
2015 |
|
|
[58]
|
Effect of Particulate Fillers on the Mechanical, Thermal, Moisture and Fire Performance of Unsaturated Isopthallic Polyester/Glass Fibre Reinforced …
|
|
2015 |
|
|
[59]
|
Comparative Study on the Wear Properties of Fly Ash and Silica Fume Filled Nylon Composites.
|
|
Applied Mechanics & Materials,
2014 |
|
|
[60]
|
Development and characterization of aluminium based metal matrix composites using fly ash and glass fiber by back pressure equal channel angular …
|
|
2014 |
|
|
[61]
|
Tribology Studies and Microscopic Analysis of Polyester-Based Red Mud Polymer Composites
|
|
Journal of Advanced Microscopy Research,
2014 |
|
|
[62]
|
Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites
|
|
Advances in Tribology,
2014 |
|
|
[63]
|
Carbon-Ceramic Composites for Friction Applications
|
|
Mechanics of Advanced Materials and Structures,
2014 |
|
|
[64]
|
Taguchi method to optimize the micron and submicron size cenosphere particulates filled E‐glass fiber‐reinforced vinylester composites
|
|
Polymer Composites,
2014 |
|
|
[65]
|
OPTIMIZATION OF PROCESS PARAMETERS OF PLASTIC INJECTION MOLDING FOR POLYPROPYLENE TO ENHANCE PRODUCTIVITY AND REDUCE TIME FOR DEVELOPMENT
|
|
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY,
2014 |
|
|
[66]
|
Development of Epoxy Composite Filled with Micro Tungsten Disulphide Particles and its Mechanical Properties
|
|
Advanced Materials Research,
2014 |
|
|
[67]
|
A Review on Sliding Wear Behaviour of Aluminium Matrix Composites with Hybrid Reinforcements for Automotive Applications
|
|
Tribology Online,
2014 |
|
|
[68]
|
Epoxy/oil fly ash composites prepared through in situ polymerization: Enhancement of thermal and mechanical properties
|
|
Polymer Composites,
2014 |
|
|
[69]
|
TENSILE AND FLEXURAL STRENGTH OF GLASS FIBER EPOXY COMPOSITES
|
|
International Conference on Advanced Materials and manufacturing Technologies (AMMT),
2014 |
|
|
[70]
|
EVALUATION OF WEAR BEHAVIOR OF A NONMETALLIC SPUR GEAR
|
|
2014 |
|
|
[71]
|
Comparative Study on the Wear Properties of Fly Ash and Silica Fume Filled Nylon Composites
|
|
2014 |
|
|
[72]
|
Effect of fly ash concentration and its surface modification on fiber reinforced epoxy composite′ s mechanical properties
|
|
2013 |
|
|
[73]
|
Friction and sliding wear characteristics study of submicron size cenosphere particles filled vinylester composites using Taguchi design of experimental technique
|
|
Journal of Composite Materials,
2013 |
|
|
[74]
|
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl ester Composites
|
|
Journal of Polymer & Composites,
2013 |
|
|
[75]
|
Effect of Fly Ash Concentration and its Surface Modification on Fiber Reinforced Epoxy Composite's Mechanical Properties
|
|
P Shubham, SK Tiwari - ijser.org,
2013 |
|
|
[76]
|
Study on mechanical and tribological behavior of cenosphere filled vinyl ester composites–a Taguchi method
|
|
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES,
2013 |
|
|
[77]
|
Study on mechanical and tribological behavior of cenosphere filled vinylester composites-A Taguchi method
|
|
2013 |
|
|
[78]
|
Tribological Properties of Fly Ash-Based Green Friction Products
|
|
Green Tribology,
2012 |
|
|
[79]
|
Effect of Unsilanized and Silanized Fly Ash on Damping Properties of Fly Ash Filled Fiber Reinforced Epoxy Composite
|
|
2012 |
|
|
[80]
|
Effect of micro size cenosphere particles reinforcement on tribological characteristics of vinylester composites under dry sliding conditions
|
|
Journal of Minerals and Materials Characterization and Engineering,
2012 |
|
|
[81]
|
Optimization of dry sliding wear performance of ceramic whisker filled epoxy composites using Taguchi approach
|
|
Advances in Tribology,
2012 |
|
|
[82]
|
Effect of micro-size cenosphere content on friction and dry sliding wear behavior of vinylester composites–A Taguchi method
|
|
Advanced Materials Research,
2012 |
|
|
[83]
|
Three-Body Abrasive Wear Behaviour of Microfiller-Filled Carbon‐Epoxy Composites: A Factorial Design Approach
|
|
Instrumentation Science & Technology,
2011 |
|
|
[84]
|
Tribological behaviour of aluminium/alumina/graphite hybrid metal matrix composite using Taguchi's techniques
|
|
2011 |
|
|
[85]
|
Three-body abrasive wear behavior of microfillers filled carbon–epoxy composites: a factorial design approach
|
|
2011 |
|
|
[86]
|
Three-Body Abrasive Wear Behaviour of Microfiller-Filled Carbon–Epoxy Composites: A Factorial Design Approach
|
|
2011 |
|
|
[87]
|
MECHANICAL AND TRIBOLOGICAL CHARATERISTICS OF CENOSPHERE PARTICLATES FILLED E-GLASS FIBER REIFORCED VINYLESTER …
|
|
|
|
|