Journal of Minerals and Materials Characterization and Engineering

Volume 9, Issue 2 (February 2010)

ISSN Print: 2327-4077   ISSN Online: 2327-4085

Google-based Impact Factor: 1  Citations  

Characterization of In-Plane Mechanical Properties of Laminated Hybrid Composites

HTML  Download Download as PDF (Size: 128KB)  PP. 105-114  
DOI: 10.4236/jmmce.2010.92009    10,520 Downloads   15,060 Views  Citations

ABSTRACT

An experimental investigation was conducted to study the effect of hybrid composite specimen subjected to in-plane tensile and compressive loading. The laminated specimens in accordance with ASTM standards were fabricated using steel and nylon bi-directional mesh as reinforcements and polyester as the binder. The various volume fractions and fiber orientations were used in which the percentage of polyester (40%) was maintained constant. From the investigations it is revealed that, the specimens with higher percentage of steel sustain greater loads & also the strengths are superior in case of 0/900 oriented specimens. A relationship between the tensile/compressive strength, fiber content and orientation has been established.

Share and Cite:

K. Satish, B. Siddeswarappa and K. Kaleemulla, "Characterization of In-Plane Mechanical Properties of Laminated Hybrid Composites," Journal of Minerals and Materials Characterization and Engineering, Vol. 9 No. 2, 2010, pp. 105-114. doi: 10.4236/jmmce.2010.92009.

Cited by

[1] Microstructure and Mechanical Properties of AZ91 Rein-Forced with High Volume Fraction of Oriented Short Carbon Fibers
Sayed Seleman, FH Latief… - Materials, 2022
[2] Investigation of the effect of steel fiber (200 mesh size) hybridization on properties of steel/glass fiber and steel/basalt fiber reinforced epoxy composite laminates
Polymer Composites, 2022
[3] On this page
Advances in Polymer Technology, 2022
[4] Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites
Mechanics of Advanced …, 2022
[5] Effect of varying initial processing temperature on mechanical properties of carbon epoxy composites
Mehran University Research …, 2021
[6] Analysis of the mechanical behavior of steel and polymer sandwich composite considering interfacial properties
2021
[7] Role of surface functionalized crystalline nano-silica on mechanical, fatigue and drop load impact damage behaviour of effective stacking sequenced e-glass fibre …
2021
[8] Characterization of glass fiber reinforced composite materials with use of Kota stone dust
2021
[9] Interlaminar shear strength behaviour of surface treated steel wire mesh/glass fibre reinforced hybrid composite laminate
2021
[10] Mode I and mode II delamination of carbon/glass/epoxy hybrid composite: A statistics‐based analysis
2021
[11] The mechanical properties of hybrid laminates composites on epoxy resin with natural jute fiber and S-glass fibers
2021
[12] MEMOIRE DE FIN D'ETUDES DE MASTER ACADEMIQUE
2021
[13] FEA simulation and experimental validation of mode I and II delamination at the carbon/glass/epoxy hybrid interface: Physical-based interpretation
2020
[14] The effects of adhesion on the tensile strength of steel-polymer sandwich composites
2020
[15] Investigation on Thermo-Mechanical Behaviour of E Glass Fibre and Iron Oxide Filler Particles Reinforced Epoxy Composite
2020
[16] Effect of small ply angle variation in tensile and compressive strength of woven GFRP composite: Application of two parameter Weibull distribution
2020
[17] Role of Surface Functionalized Crystalline Nano-silica on Mechanical, Fatigue and Drop Load Impact Damage Behaviour of Effective Stacking Sequenced E-glass …
2020
[18] Investigation of Compressive Properties of Hybrid Aloe vera/Silica Nanoparticles Composite
2020
[19] A Study on Investigation of Tensile Properties of Aloe vera Fiber Reinforced Epoxy Composites
2020
[20] Fabrication and characterization of silanized echinoidea fillers and kenaf fibre-reinforced Azadirachta-indica blended epoxy multi-hybrid biocomposite
2019
[21] MECHANICAL CHARACTERIZATION OF HYBRID LAMINATES COMPOSITES ON EPOXY RESIN WITH NATURAL JUTE FIBER AND S-GLASS FIBERS
International Journal of Engineering Applied Sciences and Technology, 2019
[22] The Influence of Dimensional parameters on Mechanical Behavior of Fiber Reinforced Polymer Matrix Composites: A Review
2019
[23] Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite
2019
[24] Tensile behavior of hybrid composites of carbon fibers—steel wire mesh reinforced polymer
2019
[25] Mechanical Strength Behavior of Hybrid Composites Tailored by Glass/Kevlar Fibre-Reinforced in Nano-Silica and Micro-Rubber Blended Epoxy
2019
[26] Mechanical and Interfacial Characterization of Jute Fabrics Reinforced Unsaturated Polyester Resin Composites
2019
[27] A Study of Bending Property for Glass Fiber Reinforced Thermoplastic Composite Sheets
2019
[28] Experimental Analysis and Comparative Mechanical testing on Glass-Carbon Hybrid Composites
2019
[29] Experimental study on effect of fiber length and fiber content on tensile and flexural properties of bamboo fiber/epoxy composite
2019
[30] Effects of surface-modified pineapple fibre-reinforced micro B4C and CTBN rubber particle toughened epoxy hybrid composites in mechanical, impact damage …
2019
[31] Pengaruh Penambahan Coremate Terhadap Kekuatan Tarik Pada Komposit Tipe Sandwich (Coremate Material Effect To Tensile Strength Of Sandwich Composite)
2019
[32] Three-dimensional porosity characterization in carbon/glass fiber epoxy hybrid composites
2019
[33] Hibridinių kompozitų su įterptine viela mechaninių savybių tyrimas
2018
[34] Design and Development of Hybrid Composite Mono Leaf spring for Lifan 1020 mini truck Application
2018
[35] PENGARUH PENAMBAHAN COREMATE TERHADAP KEKUATAN TARIK PADA KOMPOSIT TIPE SANDWICH COREMATE MATERIAL EFFECT TO TENSILE …
2018
[36] Experimental Investigation on Mechanical Behavior of Epoxy based Jute/Glass Fiber Reinforced Hybrid Composite
2018
[37] MECHANICAL STRENGTH AND THERMAL STABILITY OF WOVEN GLASS/KENAF FIBRE HYBRID-REINFORCED NANOCLAY WITH EPOXY COMPOSITES
2018
[38] Unhole and open hole compressive behaviours of hybrid kevlar/glass fibre reinforced silica nanocomposites
Materials Research Express, 2018
[39] Mechanical Strength Behaviour of Silane Treated E-glass Fibre/Al 6061 & SS-304 Wire Mesh Reinforced Epoxy Resin Hybrid Composite
Silicon, 2018
[40] Effect of Silane Modified E-glass Fibre/Iron (III) Oxide Reinforcements on UP Blended Epoxy Resin Hybrid Composite
Silicon, 2018
[41] Mechanical and Microstructural Characteristics of the Glass–Carbon Fiberous Composite Materials
2018
[42] Investigating water absorption and thickness swelling tendencies of polymeric composite materials for external wall application in refrigerated vehicles
Nigerian Journal of Technology, 2018
[43] MECHANICAL STRENGTH AND THERMAL STABILITY OF WOVEN GLASS/KENAF FIBRE HYBRID-REINFORCED NANOCLAY WITH EPOXY …
2018
[44] Tensile Properties Komposit Serat e-Glass, Hasil Vacuum Infussion sebagai Material Struktur LSU(Lapan Surveillance UAV)
Prosiding Siptekgan XXI-2017, Pustekbang, LAPAN …, 2017
[45] Evaluation of Impact Strength of Epoxy Based Hybrid Composites Reinforced with E-Glass/Kevlar 49
2017
[46] Otimização da determinação de vazios em compósitos híbridos processados por RTM
Repositório Institucional UNESP, 2017
[47] TENSILE PROPERTIES KOMPOSIT SERAT E-GLASS HASIL VACUUM INFUSION SEBAGAI MATERIAL STRUKTUR LSU (LAPAN SURVEILLANCE UAV)
2017
[48] Shear deformation behavior of hybrid composite (GFRP/CFRP) Verformungverhalten von Hybridverbundwerkstoffen (GFRP/CFRP) unter Scherung
Materialwissenschaft und Werkstofftechnik, 2017
[49] Shear deformation behavior of hybrid composite (GFRP/CFRP)
Materialwissenschaft und Werkstofftechnik, 2017
[50] EFFECT OF LAYUP PLACEMENT ON TENSILE PROPERTIES OF E-GLASS/KEVLAR 49 EPOXY BASED HYBRID COMPOSITES
Sci.Int.(Lahore), 2017
[51] Mechanical Behavior of Hybrid Glass/Steel Fiber Reinforced Epoxy Composites
Polymers, 2017
[52] EFFICIENT DETERMINATION OF MECHANICAL PROPERTIES OF CARBON FIBRE-REINFORCED LAMINATED COMPOSITE PANELS
ARPN Journal of Engineering and Applied Sciences, 2017
[53] Investigation on the fatigue life characteristic of kenaf/glass woven-ply reinforced metal sandwich materials
Journal of Sandwich Structures & Materials, 2017
[54] Effect of SiC Particulate on Glass Fibers Reinforced Polymer Composites in Erosive Wear Environment
Engineering and Technology Journal, 2017
[55] Design and Fabrication of E-Glass/carbon/graphite epoxy hybrid composite leaf spring
IOP Conference Series: Materials Science and Engineering, 2017
[56] Fabrication, Mechanical and Interfacial Properties of Jute Fabrics Unsaturated Polyester Resin-Based Composites
Conference Paper, 2017
[57] Strength characterization of glass-carbon hybrid reinforcements-an experimental investigation
2017
[58] Tensile Properties Komposit Serat e-Glass, Hasil Vacuum Infussion sebagai Material Struktur LSU (Lapan Surveillance UAV)
2017
[59] Preparing, Studying and Drilling the Hybrid Composite Material withoutOrientation
International Journal of Latest Engineering Research and Applications, 2017
[60] ANALISIS SIFAT KEKUATAN TARIK DAN KEKUATAN BENDING KOMPOSIT HIBRYD SERAT LIDAH MERTUA DAN KARUNG GONI DENGAN FILLER ABU SEKAM PADI 5% BERMATRIK EPOXY
Dinamika Teknik Mesin, 2016
[61] Electrospun nano-mat strengthened aramid fibre hybrid composites improved mechanical properties by continuous nanofibres
2016
[62] Effect of Thickness and Fiber Orientation on Flexural Strength of GFRP Composites
2016
[63] NYLON/GLASS FABRICS SYNTHETIC REINFORCED POLYMER HYBRID COMPOSITES
2016
[64] Mechanical Behavior of Hybrid Glass/Steel Reinforced Epoxy Composites
2016
[65] MECHANICAL EVALUATION OF POLYVINYL-ACETATE (PVA)-POLYOL AND KAOLIN SPECIMENS
International Journal of Latest Research in Science and Techology, 2016
[66] Effect of surface treatment on mechanical properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites
Journal of Mechanical Science and Technology, 2016
[67] Effect of Al2O3 Powder on Some Mechanical and Physical Properties for Unsaturated Polyester Resin Hybrid Composites Materials Reinforced by Carbon and Glass …
Engineering and Technology Journal, 2016
[68] Study of Bending Property for Epoxy/Kevlar-Glass Fibers and Hybrid Composite
Engineering and Technology Journal, 2015
[69] ENERGY ABSORPTION ANALYSIS OF RUPD
International Journal of Research in Engineering and Technology , 2015
[70] Influence of Carbon & Glass Fiber Reinforcements on Flexural Strength of Epoxy Matrix Polymer Hybrid Composites
2015
[71] Experimental Investigation and FE Analysis of CFRP Composites
Materials Today: Proceedings, 2015
[72] OPTIMUM NOTCHED STRENGTH EVALUATION OF GLASS-FIBER REINFORCED POLYMERS
2015
[73] EXPERIMENTAL STUDY OF EFFECT OF FIBER ORIENTATION ON THE FLEXURAL STRENGTH OF GLASS/EPOXY COMPOSITE MATERIAL
2014
[74] Advanced Materials Manufacturing & Characterization
P Das, SK Panda, DK Pratihar - ijammc-griet.com, 2014
[75] THE MECHANICAL PROPERTIES OF NATURAL FIBER COMPOSITES
EAO Al-Bahadly - researchbank.swinburne.edu.au, 2013
[76] Effect of Filler Type on some Physical and Mechanical Proparties of Carbon Fibers/Polyester Composites
OS Muhammed, AK Hussein, RH Abdel-Rahim - uotechnology.edu.iq, 2013
[77] EFFECT OF REINFORCEMENT ALIGNMENT ON THE PROPERTIES OF POLYMER MATRIX COMPOSITE
2013
[78] Processing & characterization of jute/glass fiber reinforced epoxy based hybrid composites
2013
[79] Processing, Characterization and Mechanical Behaviour of Coir/Glass Fibre Reinforced Epoxy Based Hybrid Composites
2013
[80] Effect of filler type on some physical and mechanical properties of carbon fibers/polyester composites
2013
[81] Mechanical Properties of Angle Ply Laminated Composites-A Review
Int. J. Pure Appl. Sci. Technol, 2012
[82] Development and characterization of thermally conductive polymeric composites for electronic packaging applications
2011
[83] PENGARUH ORIENTASI SUDUT ANYAMAN SERAT CANTULA TERHADAP KEKUATAN BENDING DAN GAYA TARIK PAKU KOMPOSIT SEMEN SERBUK AREN–CANTULA
2011
[84] PENGARUH ORIENTASI SUDUT ANYAMAN SERAT CANTULA TERHADAP KEKUATAN BENDING DAN GAYA TARIK PAKU KOMPOSIT SEMEN SERBUK AREN …
2011
[85] Experimental and Micro-Macro Mechanics Methods in Prediction of Mechanical Properties of Carbon Fibre-Reinforced Composite Panels

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.