[1]
|
Optimization of Wire Electrical Discharge Machining Process Parameters for Al7075/Al2O3/SiC Composite Using Aspect Ratios of Taguchi Method, Taguchi-Pareto …
|
|
Engineering Access,
2023 |
|
|
[2]
|
The impact of boron nitride (BN) on tribological behaviour of AZ84 magnesium matrix composites
|
|
Materials Today …,
2022 |
|
|
[3]
|
Sliding wear response of ultrasonic-assisted stir-squeeze cast Al-Zn (-Mg) alloy/ZrO2p composite: wear mechanism and subsurface deformation
|
|
Surface Topography: Metrology and …,
2022 |
|
|
[4]
|
Optimization of tribo-mechanical properties of boron carbide reinforced magnesium metal matrix composite
|
|
Proceedings of the …,
2022 |
|
|
[5]
|
An investigation on the microstructure and mechanical properties of Al-Zn-Mg-Cu/Ti composite produced by compocasting
|
|
International Journal of …,
2022 |
|
|
[6]
|
Mechanically alloyed high entropy alloys: existing challenges and opportunities
|
|
Journal of Materials Research and …,
2022 |
|
|
[7]
|
Experimental Investigation and Prediction Analysis on Granite/SiC Reinforced Al7050 and Al7075 Using Hybrid Deep Neural Network Based Salp Swarm …
|
|
Silicon,
2022 |
|
|
[8]
|
Production of AA1050/silica fume composite by bobbin tool-friction stir processing: Microstructure, composition and mechanical properties
|
|
CIRP Journal of …,
2022 |
|
|
[9]
|
Effect of pin geometry and orientation on friction and wear behavior of nickel-coated EN8 steel pin and Al6061 alloy disc pair
|
|
advances in materials …,
2022 |
|
|
[10]
|
Effect of wear debris on fretting fatigue crack initiation
|
|
Friction,
2022 |
|
|
[11]
|
Moisture effects on vibration response of SMA particulate epoxy composite
|
|
Australian Journal of …,
2022 |
|
|
[12]
|
Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites
|
|
Materials Testing,
2022 |
|
|
[13]
|
An overview of the effect of stirrer design on the mechanical properties of Aluminium Alloy Matrix Composites fabricated by stir casting
|
|
Zanco Journal of Pure and Applied Sciences,
2022 |
|
|
[14]
|
Effect of particle size on mechanical behavior of sugarcane bagasse ash reinforced AlSi10Mg alloy
|
|
Materials Today …,
2022 |
|
|
[15]
|
Investigation of mechanical characteristics of SiC and flyash particle reinforced aluminium matrix composites
|
|
Materials Today …,
2022 |
|
|
[16]
|
A critical review on mechanically alloyed high entropy alloys: processing challenges and properties
|
|
Materials Research Express,
2022 |
|
|
[17]
|
Experimental investigation of wear properties of AA6061+ Al2O3 metal matrix composite fabricated by vacuum stir casting method
|
|
Materials Today: Proceedings,
2022 |
|
|
[18]
|
Fabrication of aluminum based metal matrix composite using stir casting method and characterize its tribological properties
|
|
Materials Today: Proceedings,
2022 |
|
|
[19]
|
MECHANICAL AND WEAR BEHAVIOR FOR ALUMINUM ALLOY REINFORCED WITH DUAL NANOPARTICULATE (TiO2+ SiO2)
|
|
2022 |
|
|
[20]
|
Effect of powder metallurgy process parameters on tribology and micro hardness of Al6063-nano Al2O3 MMCs
|
|
Materials Today …,
2022 |
|
|
[21]
|
Dry Sliding Wear Study on AA6061/SiCp Nano and AA6061/SiCp/Gr Hybrid Nanocomposites
|
|
Silicon,
2022 |
|
|
[22]
|
Impact of Silicon Carbide Particles Weight Percentage on the Microstructure, Mechanical Behaviour, and Fractography of Al2014 Alloy Composites
|
|
Advances in Materials …,
2022 |
|
|
[23]
|
Experimental analysis of Al-AlN-B4C hybrid composite material for automobile disk brake
|
|
Materials Today …,
2021 |
|
|
[24]
|
An overview on the synthesis of aluminium matrix composites using stir casting technique
|
|
Materials Today: Proceedings,
2021 |
|
|
[25]
|
Effect of SiC and Gr particles on the mechanical properties and dynamic characteristics of AA 7075 hybrid metal matrix composite
|
|
Materials Today …,
2021 |
|
|
[26]
|
Study of mechanical properties and wear behavior of aluminum 6061 matrix composites reinforced with Hematite and Titania
|
|
Materials Today: Proceedings,
2021 |
|
|
[27]
|
Effect of Wettability and Uniform Distribution of Reinforcement Particle on Mechanical Property (Tensile) in Aluminum Metal Matrix Composite—A Review
|
|
Nanomaterials,
2021 |
|
|
[28]
|
Influence of heat treatment on tribological behavior of Al/ZrO2/fly ash hybrid composite
|
|
Materials Today …,
2021 |
|
|
[29]
|
Micro-structural and mechanical characterization of AA2014/TiB2/Al2O3 hybrid composites
|
|
AIP Conference …,
2021 |
|
|
[30]
|
A Study on Mechanical and Tribological Properties of Aluminum 7075 MMCS Reinforced with Silicon Carbide and Coconut Husk by Powder Metallurgy Process
|
|
2021 |
|
|
[31]
|
Structural and suitability analysis of aluminium metal matrix composites for IC engine mountings
|
|
Materials Today …,
2021 |
|
|
[32]
|
A comprehensive review of aluminium matrix composite reinforcement and fabrication methodologies
|
|
Functional Composites …,
2021 |
|
|
[33]
|
The Influence of Structural Components of Diamond-Bearing Mineral Ceramic Abrasive Material on Its Cutting Ability and the Treated Surface Quality
|
|
International Conference on Industrial …,
2021 |
|
|
[34]
|
ВЛИЯНИЕ СТРУКТУРЫ МИНЕРАЛОКЕРАМИЧЕСКОГО АБРАЗИВНОГО МАТЕРИАЛА НА ЭКСПЛУАТАЦИОННЫЕ ПАРАМЕТРЫ И МОРФОЛОГИЮ …
|
|
… Серия: Технические науки,
2021 |
|
|
[35]
|
Synthesis and Characterization of Al
|
|
2021 |
|
|
[36]
|
Mechanical properties of aluminium-graphene/carbon nanotubes (CNTs) metal matrix composites: advancement, opportunities and perspective
|
|
2021 |
|
|
[37]
|
Study of tribological properties on aluminium based hybrid composite developed through microwave energy
|
|
2021 |
|
|
[38]
|
Investigation on mechanical, tribological and microstructural properties of Al–Mg–Si–T6/SiC/muscovite-hybrid metal-matrix composites for high strength …
|
|
2021 |
|
|
[39]
|
Effect of Hot Rolling on Physical and Mechanical Properties of Al 6061 Alloy-Based Metal Matrix Composite
|
|
2021 |
|
|
[40]
|
Optimization of wear and friction parameters in Aluminum7075 hybrid composite
|
|
2021 |
|
|
[41]
|
Mechanical study of Al 7050 and Al 7075 based metal matrix composites: A review
|
|
2021 |
|
|
[42]
|
Investigation on mechanical properties of Al319–Al2O3–TiO2 reinforced hybrid metal matrix composites
|
|
2021 |
|
|
[43]
|
Eggshell and rice husk ash utilization as reinforcement in development of composite material: A review
|
|
2021 |
|
|
[44]
|
Fabrication methods of metal matrix composites (MMCs)
|
|
2021 |
|
|
[45]
|
Effect Multiple Addition (TiO2 and Fly Ash) on Wear Behavior and Hardness of 2024 Al Alloy
|
|
2021 |
|
|
[46]
|
Evaluation of mechanical properties of Al7029/flyash/WC hybrid composites developed by liquid metallurgy
|
|
2021 |
|
|
[47]
|
A Review on the Significance of Hybrid Particulate Reinforcements on the Mechanical and Tribological Properties of Stir-Casted Aluminum Metal Matrix Composites
|
|
2021 |
|
|
[48]
|
Experimental studies on the wear and mechanical properties of Al7075-B4C-Al2O3 composite
|
|
2021 |
|
|
[49]
|
Investigation on Mechanical, Tribological and Microstructural properties of Al-Mg-Si-T6/SiC/Muscovite-hybrid metal-matrix composites for high strength …
|
|
2021 |
|
|
[50]
|
Influence of Heat Treatment on Mechanical Characteristics of Al7075/Al2O3/TiC Hybrid Metal Matrix Composite
|
|
2021 |
|
|
[51]
|
Microstructure and mechanical properties of AA7075/Al3Ni composites produced by compocasting
|
|
2021 |
|
|
[52]
|
Synthesis and Mechanical Behavior of Ball-Milled Agro-Waste RHA and Eggshell Reinforced Composite Material
|
|
2021 |
|
|
[53]
|
Elevated-temperature high-strength h-BN-doped Al2014 and Al7075 composites: Experimental and theoretical insights
|
|
2021 |
|
|
[54]
|
Effect of Reinforment of Particles on the Mechanical Properties of Al6065-SiC, Al6065-Al2O3, Hybrid Composites by Modified Stir Casting Method
|
|
2021 |
|
|
[55]
|
Mechanical, tribological and microstructural characterization of stir cast Al-6061 metal/matrix composites—a comprehensive review
|
|
2021 |
|
|
[56]
|
Tribological Behaviour of AL7068-Alumina-B4C Hybrid Composites and Optimization with DEMATEL Technique
|
|
2021 |
|
|
[57]
|
Effects of process parameters on additive manufacturing of aluminum porous materials and their optimization using response surface method
|
|
Journal of Materials Research and Technology,
2021 |
|
|
[58]
|
Forming of metal-based composite parts
|
|
CIRP Annals,
2021 |
|
|
[59]
|
Synthesis and Characterization of Al 7072-Al2O3 Metal Matrix Composites
|
|
2021 |
|
|
[60]
|
Manufacturing techniques for metal matrix composites (MMC): an overview
|
|
2020 |
|
|
[61]
|
Investigation of the Machinability of SiC Reinforced MMC materials produced by Molten Metal Stirring and Conventional Casting Technique in Die-Sinking Electrical …
|
|
2020 |
|
|
[62]
|
Study of Thermal Properties of AA 6061and Thermal Analysis of a Fin and a Chip of AA 6061 based Particulate Metal Matrix Composites
|
|
2020 |
|
|
[63]
|
Effect of B4C and waste porcelain ceramic particulate reinforcements on mechanical and tribological characteristics of high strength AA7075 based hybrid …
|
|
2020 |
|
|
[64]
|
Effect of reinforcement and fabrication of Al6061 nanosilica composite prepared using single-and two-step methods
|
|
2020 |
|
|
[65]
|
Influence of Milling Parameters on Surface Roughness of Al–SiC–B 4 C Composites
|
|
2020 |
|
|
[66]
|
Research on deformation prediction and error compensation in precision turning of micro-shafts
|
|
2020 |
|
|
[67]
|
Design and Development of the Front Wheel Hub for All-Terrain Vehicle (ATV)
|
|
2020 |
|
|
[68]
|
The Machining Characteristics of the Al7075-B4C Nanocomposites Developed Using Ultrasonic Liquid Processor
|
|
2020 |
|
|
[69]
|
Electro-discharge machining of metal matrix composites-a review
|
|
2020 |
|
|
[70]
|
Investigation on Wear Behaviour of AA5052/SiC/Al2O3 Hybrid Composite Fabricated Using Stir Casting Process
|
|
2020 |
|
|
[71]
|
Comparison of mechanical properties of Al6063 alloy with ceramic particles
|
|
2020 |
|
|
[72]
|
Measurement of Friction and Wear in Aluminum Alloy Al7075/Sic & Gr Processed By Friction Stir Method
|
|
2020 |
|
|
[73]
|
Friction and wear reduction properties of GNP nano-particles as nano-additive for Al-Si+ Al2O3 composite/Chromium plated steel tribopair
|
|
2020 |
|
|
[74]
|
Appraisal of tribological properties of A356 with 20% SiC composites under dry sliding condition
|
|
2020 |
|
|
[75]
|
Review on properties of aluminium metal matrix composites
|
|
2020 |
|
|
[76]
|
Parametric analysis of tribological for gear materials behaviour and mechanical study of cobalt metal powder filled Al-7075 alloy composites
|
|
2020 |
|
|
[77]
|
A Critical Review on Synthesis of Aluminum Metallic Composites through Stir Casting: Challenges and Opportunities
|
|
2020 |
|
|
[78]
|
Design and development of the front wheel hub for All-Terrain Vehicle (ATV)/Himanshu Verma...[et al.]
|
|
2020 |
|
|
[79]
|
Минералокерамический композиционный материал: синтез и фрикционные свойства
|
|
2020 |
|
|
[80]
|
Mechanical & Tribological Behaviors of Aluminium Metal Matrix/Hybrid Metal Matrix Composites: A Review
|
|
JOURNAL OF CRITICAL REVIEWS,
2020 |
|
|
[81]
|
Effect of ZrO2 Addition on Microstructure and Mechanical Properties of Al-Zn-Mg Alloy Matrix Composite
|
|
2020 |
|
|
[82]
|
A Study on Mechanical Properties of Aluminium 7075 MMCs Reinforced with Nano Silicon Carbide and Tur Husk
|
|
2020 |
|
|
[83]
|
A Review on Electrical, Thermal and Wear Behaviour of AL6061-Ag Composite
|
|
Dogo Rangsang Research Journal,
2020 |
|
|
[84]
|
Dry sliding wear behaviour of Al6061–5% SiC—TiB2 hybrid metal matrix composites synthesized by stir casting process
|
|
2020 |
|
|
[85]
|
Hardness and Wear Behavior of Al 6061/ZrC Composite Processed by Friction Stir Processing.
|
|
2020 |
|
|
[86]
|
Tribological characteristics of TiO2 particles reinforced aluminum nanocomposites produced via liquid metallurgy techniques with ultrasonic vibrator
|
|
2020 |
|
|
[87]
|
Optimization of machining process parameters in Al 7175 metal matrix composites using Taguchi method
|
|
2020 |
|
|
[88]
|
A Critical Review on Advanced Reinforcements and Base Materials on Hybrid Metal Matrix Composites
|
|
2020 |
|
|
[89]
|
Experimental investigation on surface roughness, tool wear and cutting force in turning of hybrid (Al7075+ SiC+ Gr) metal matrix composites
|
|
2020 |
|
|
[90]
|
СТРУКТУРА И СВОЙСТВА АНТИФРИКЦИОННЫХ ПОКРЫТИЙ ИЗ СИЛУМИНА АК12, НАНЕСЕННЫХ НА СТАЛЬНУЮ ОСНОВУ ЦЕНТРОБЕЖНЫМ …
|
|
2020 |
|
|
[91]
|
Pengaruh SiC dan Penambahan Fraksi Volume Mg Terhadap Karakteristik Komposit Al6061-SiC
|
|
2020 |
|
|
[92]
|
Experimental Investigation of Mechanical and Wear Properties of AL7075/Al 2 O 3/MICA Hybrid Composite
|
|
2020 |
|
|
[93]
|
New study on tribological performance of AA7075-TiB2 nanocomposites
|
|
2020 |
|
|
[94]
|
Optimization of mechanical properties of aluminum metal matrix composite using silicon cambride
|
|
2020 |
|
|
[95]
|
Hardness and wear behavior of al 6061/zrc composite processed by friction stir processing
|
|
Tribology in Industry,
2020 |
|
|
[96]
|
Al-Mg Alloys Prepared by Mechanically Alloying Reinforced with Carbon Nanotubes and Their Corrosion Behavior in Bioethanol
|
|
Int. J. Electrochem …,
2020 |
|
|
[97]
|
Experimental Analysis & Simulation of Tugsten Inert Gas (TIG) Welding on Aluminium Alloy AA6061
|
|
2019 |
|
|
[98]
|
Исследование структуры и триботехнических свойств антифрикционных покрытий повышенной износостойкости, модифицированных карбидо …
|
|
2019 |
|
|
[99]
|
ТЕХНОЛОГИЧЕСКИЕ ОСОБЕННОСТИ ПОЛУЧЕНИЯ БИМЕТАЛЛИЧЕСКИХ ВТУЛОК С АНТИФРИКЦИОННЫМ ПОКРЫТИЕМ ИЗ СПЛАВА АК12
|
|
2019 |
|
|
[100]
|
Структура и триботехнические свойства бронзы БРОФ10-1, сформированные модифицированием сплава композиционным наполнителем, содержащим …
|
|
2019 |
|
|
[101]
|
Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites
|
|
2019 |
|
|
[102]
|
Synthesis, microstructure and properties of TiO2 reinforced AA7075 matrix composites via stir casting route
|
|
2019 |
|
|
[103]
|
Compressive behavior of porous materials fabricated by laser melting deposition using AlSi12 powder and foaming agent
|
|
2019 |
|
|
[104]
|
Alloys for aeronautic applications: state of the art and perspectives
|
|
Metals,
2019 |
|
|
[105]
|
Tribology analysis of cobalt particulate filled Al 7075 alloy for gear materials: a comparative study
|
|
Silicon,
2019 |
|
|
[106]
|
Corrosion behavior of A356/SiC alloy matrix composites in 3.5% NaCl solution
|
|
Hinojosa, FR Gómez… - International Journal …,
2019 |
|
|
[107]
|
FORMABILITY CHARACTERISTICS OF Al-Cu-TiC COMPOSITE MATERIAL DURING COLD UPSETTING
|
|
2019 |
|
|
[108]
|
Fabrication and Characterization of Hybrid Metal Matrix Composites
|
|
2019 |
|
|
[109]
|
Studies on mild steel particulates reinforced Duralumin composite fabricated through Powder metallurgy route
|
|
2019 |
|
|
[110]
|
A LITERATURE REVIEW ON ALUMINIUM-7075 METAL MATRIX COMPOSITES
|
|
2019 |
|
|
[111]
|
Corrosion behaviour of novel molten salt processed aluminium nanocomposites under different treated conditions
|
|
2019 |
|
|
[112]
|
NUMERICAL STUDY ON MHD MIXED CONVECTION SLIP EFFECTS NEAR A STAGNATION-POINT ON A LINEAR/NON-LINEARLYVERTICAL STRETCHING SHEET OF JEFFREY FLUID FLOW IN A POROUS MEDIUM WITH SUCTION OR INJECTION
|
|
Global Journal of Engineering Science and Researches,
2019 |
|
|
[113]
|
Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced Al 7075 composites
|
|
2019 |
|
|
[114]
|
Experimental Investigation of Wear and Hardness Properties of Reinforced Al-MMC's Without and with Heat Treatment Process
|
|
2019 |
|
|
[115]
|
EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF A DIESEL ENGINE WITH PISTON USING ALUMINIUM LM25 ALLOY …
|
|
2019 |
|
|
[116]
|
Mechanical Strength and Corrosion Rate of Aluminium Composites (Al/SiO2): Nanoparticle Silica (NPS) as Reinforcement
|
|
2019 |
|
|
[117]
|
A review on the production of metal matrix composites through stir casting–Furnace design, properties, challenges, and research opportunities
|
|
2019 |
|
|
[118]
|
Development of High Performance (Mechanical and Wear Properties) of AA 6061-Hybrid Nano Composites Via Liquid Metallurgy Route
|
|
2019 |
|
|
[119]
|
Effect of heat treatment on hardness, tensile strength and microstructure of hot and cold forged Al6061 metal matrix composites reinforced with silicon carbide particles
|
|
2019 |
|
|
[120]
|
Investigation of mechanical properties of Al 6061/SiC composite prepared through stir casting technique
|
|
2019 |
|
|
[121]
|
A Study of Macrostructure and Wear Behavior of AL7075-B4C MMC Using DoE Method
|
|
2019 |
|
|
[122]
|
Fabrication and Mechanical Behavior of Aluminum Matrix Composites Reinforced with Nano Alumina Particles
|
|
Düzce üniversitesi Bilim ve Teknoloji Dergisi,
2019 |
|
|
[123]
|
Mechanical and tribological characterization of aluminum metal matrix composite reinforced with micro ceramic particles (TiB2/SiC)
|
|
2019 |
|
|
[124]
|
Nanocomposites of Al5083/SiC; strength and wear behaviors
|
|
2019 |
|
|
[125]
|
Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications
|
|
2019 |
|
|
[126]
|
Assessment of mechanical and tribological characteristics of Silicon Nitride reinforced aluminum metal matrix composites
|
|
2019 |
|
|
[127]
|
Effect of SiC Reinforced Particle Parameters in the Development of Aluminium Based Metal Matrix Composite
|
|
EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy,
2019 |
|
|
[128]
|
Experimental Investigations on Wear Properties of Al-7075/ZrO2/Coal bottom ash Metal Matrix Composites
|
|
The International journal of analytical and experimental modal analysis,
2019 |
|
|
[129]
|
Effects of Reinforcement on Tribological Behaviour of Aluminium Matrix Composites
|
|
2019 |
|
|
[130]
|
An Investigation on Mechanical and Wear Characteristics of Al 6063/TiC Metal Matrix Composites Using RSM
|
|
2019 |
|
|
[131]
|
EXPERIMENTAL INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF A DIESEL ENGINE WITH PISTON USING ALUMINIUM LM25 ALLOY?REINFORCED WITH B4C AND GRAPHITE PARTICULATE
|
|
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)),
2019 |
|
|
[132]
|
Исследование теплофизических, механических и прочностных свойств композиционных материалов на основе углеродных наноструктур
|
|
Thesis,
2019 |
|
|
[133]
|
Influence of nickel coating of Al2O3 (P) reinforced AA-7075 metal matrix composites on hardness, impact strength and tensile properties
|
|
2019 |
|
|
[134]
|
PREPARATION OF AMCs BY STIR CASTING METHOD: A REVIEW
|
|
2019 |
|
|
[135]
|
Experimental Investigation of Mechanical and Tribological Properties of Al 7075—MoS2/ZrO2/Ni Hybrid Composite
|
|
Advances in Materials and Metallurgy,
2019 |
|
|
[136]
|
Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties
|
|
2019 |
|
|
[137]
|
Dynamic analysis and optimization of SiC reinforced Al6082 and Al7075 MMCs
|
|
2019 |
|
|
[138]
|
Mechanical Properties of AA 7075/Al2O3/SiC Nano-metal Matrix Composites by Stir-Casting Method
|
|
Journal of The Institution of Engineers (India): Series D,
2019 |
|
|
[139]
|
Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites
|
|
2019 |
|
|
[140]
|
Influence of Titanium Diboride and Graphite Reinforcement on Al6061 Alloy
|
|
2018 |
|
|
[141]
|
Mechanical and Tribological Properties of AA7075 Based MMC Processed through Ultrasound Assisted Casting Technique
|
|
2018 |
|
|
[142]
|
Investigations on the Effect of Molybdenum (Mo) and Molybdenum Silicon Carbide (Mo-10% Sic) Composite Coatings on Mild Steel Substrate using HVOF Technique
|
|
2018 |
|
|
[143]
|
Effect of SiC on Mechanical, Microstructure and Tribological properties of Aluminum MMC processed by Stir Casting
|
|
2018 |
|
|
[144]
|
Mechanical and tribological behavior of SiC and fly ash reinforced Al 7075 composites compared to SAE 65 bronze
|
|
2018 |
|
|
[145]
|
Surface quality and material removal rate in turning aluminium matrix composite–a grey relational approach
|
|
2018 |
|
|
[146]
|
Investigation on mechanical properties of aluminium 7075-boron carbide-coconut shell fly ash reinforced hybrid metal matrix composites
|
|
2018 |
|
|
[147]
|
Evaluation of Al7075 Reinforced with SiC for its Mechanical Properties & Surface Roughness by Drilling
|
|
2018 |
|
|
[148]
|
Aluminium Composites Fabrication Technique and Effect of Improvement in Their Mechanical Properties–A Review
|
|
2018 |
|
|
[149]
|
Investigation of mechanical, morphological studies and electrochemical micro holing process parameters on Al6061-SiC-Gr hybrid metal matrix composites
|
|
International Journal of Heavy Vehicle Systems,
2018 |
|
|
[150]
|
Experimental Investigation of Mechanical and Tribological Properties Hybrid Composite of Al 7075—MoS2/ZrO2/Ni
|
|
2018 |
|
|
[151]
|
STUDY ON MECHANICAL BEHAVIOR OF BORON CARBIDE AND RICE HUSK ASH BASED ALUMINIUM ALLOY 6061 HYBRID COMPOSITE
|
|
International Journal of Technical Innovation in Modern Engineering & Science,
2018 |
|
|
[152]
|
Mechanical Properties of Al 6061/Al2O3 Nanocomposite by Stir Casting
|
|
Engineering and Technology Journal,
2018 |
|
|
[153]
|
Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075–steel powder reinforced metal matrix …
|
|
Materials Research Express,
2018 |
|
|
[154]
|
STUDIES ON MECHANICAL BEHAVIOUR OF ALUMINIUM BASED COMPOSITES
|
|
2018 |
|
|
[155]
|
Role of Reinforcements on the Mechanical and Tribological Behavior of Aluminum Metal Matrix Composites–A Review
|
|
Materials Today: Proceedings,
2018 |
|
|
[156]
|
Mechanical deformation behavior of aged Al-Cu alloys and innovative Al-Cu metal matrix composite fabricated using stir-casting technique
|
|
Materials Today: Proceedings,
2018 |
|
|
[157]
|
Mechanical characterization of precipitation hardened Al7075-grey cast iron powder reinforced metal matrix composites
|
|
International Conference on Research in Mechanical Engineering Sciences (RiMES 2017),
2018 |
|
|
[158]
|
Design and Evaluation of Al Hybrid Composite for Connecting Rod
|
|
Advanced Manufacturing and Materials Science,
2018 |
|
|
[159]
|
Preparation and Study the Wear Behaviour of Aluminium Hybrid Composite
|
|
Materials Today: Proceedings,
2018 |
|
|
[160]
|
Investigation of Hardness by Experimental and Simulation Studies on Al-12.5% Si Piston Alloys Reinforced by Cu Powder
|
|
International Journal of Applied Engineering Research [IJAER],
2018 |
|
|
[161]
|
Study on Mechanical Behavior of Aluminum Alloy 6061 Based Composites a Review
|
|
IOSR Journal of Mechanical and Civil Engineering,
2018 |
|
|
[162]
|
Mechanical Investigation of Aluminum Hybrid Composite Reinforced with CNT and Aluminum Oxide (Al2O3)
|
|
Advanced Science, Engineering and Medicine,
2018 |
|
|
[163]
|
Experimental Investigations on Mechanical and Tribological Properties of Extruded Aluminium A356 - AL2O3 Stir Cast MMC
|
|
Materials Today: Proceedings,
2018 |
|
|
[164]
|
Aluminium metal matrix composites: A retrospective investigation
|
|
2018 |
|
|
[165]
|
Experimental Investigation of Friction and Wear Properties of a Clutch Facing Made of Al-7075 with Basalt Fiber Metal Matrix Composite
|
|
Journal of Multiscale Modelling,
2018 |
|
|
[166]
|
An investigation on the tribological characteristics of Al 7075 based single and hybrid nanocomposites
|
|
Materials Today: Proceedings,
2018 |
|
|
[167]
|
TRIBOLOGICAL BEHAVIOUR FOR STIR CAST Al5086/Gr/Al2O3 HYBRID MATRIX COMPOSITE
|
|
2018 |
|
|
[168]
|
Artificial Neural Network Prediction On Wear Of Al6061 Alloy Metal Matrix Composites Reinforced With -Al2o3
|
|
Materials Today: Proceedings,
2018 |
|
|
[169]
|
Effect of Ceramic and Metallic Reinforcement on Mechanical, Corrosion, and Tribological Behavior of Aluminum Composite by Adopting Design of Experiment Through Taguchi Technique
|
|
2018 |
|
|
[170]
|
Fabrication of Al6061-Al2O3 composite through liquid metallurgy technique
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
[171]
|
Manufacturing, characterization and applications of lightweight metallic foams for structural applications
|
|
Materials Today: Proceedings,
2018 |
|
|
[172]
|
Amalgamation of aluminium-Mg2Si alloys in various weight percentage and study of their tensile and wear behaviours
|
|
International Journal of Additive and Subtractive Materials Manufacturing,
2018 |
|
|
[173]
|
Effect of Tungsten Carbide Reinforcement on the Aluminum 6061 Alloy
|
|
2018 |
|
|
[174]
|
Evaluation Microstructure and the Mechanical Properties of Composite Material for Al-Matrix Reinforced by Ceramic Materials (Sic And Al2O3)
|
|
2018 |
|
|
[175]
|
Experimental studies of mechanical properties and tribological behaviour of aluminium composite reinforced with coconut shell ash particulates
|
|
International Journal of Materials Engineering Innovation,
2018 |
|
|
[176]
|
Investigation of Reinforced Composite Aluminum Materials
|
|
International Journal of Applied Physics and Mathematics,
2018 |
|
|
[177]
|
Influence of Solutionising and Aging Treatments on Mechanical Behavior of Stir-Cast Eutectoid Steel Powder Reinforced Al 7075 Metal Matrix Composites
|
|
2018 |
|
|
[178]
|
Quality Enhancement of TIG Welded Al6061 SiCp Composites by Age Hardening Process
|
|
2018 |
|
|
[179]
|
Experimental investigation on mechanical properties of aluminium based composites
|
|
2018 |
|
|
[180]
|
SYNTHESIS OF AL5052-SIC-GRAPHITE METAL MATRIX COMPOSITE AND ASSESSMEMT OF ITS TRIBOLOGICAL PROPERTIES
|
|
2018 |
|
|
[181]
|
Experimental Investigation and Analysis of Glass Fiber Epoxy Reinforced with Rubber and Wood Powder
|
|
2018 |
|
|
[182]
|
Aluminum metal matrix composites a review of reinforcement; mechanical and tribological behavior.
|
|
2018 |
|
|
[183]
|
Mechanical behavior of Al 7075 reinforced with AL2O3 And SiC Nano particles Fabricated by Stir Casting Method
|
|
2018 |
|
|
[184]
|
Modeling of Wear Behavior of AA7068/TiC Metal Matrix Composites Using Fuzzy Logics and Response Surface Model
|
|
2018 |
|
|
[185]
|
Utilization of Avocado Seeds as Bioplastic Films Filler Chitosan and Ethylene Glycol Plasticizer
|
|
2018 |
|
|
[186]
|
MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE.
|
|
2018 |
|
|
[187]
|
Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites
|
|
2018 |
|
|
[188]
|
Aluminum metal matrix composites a review of reinforcement; mechanical and tribological behavior
|
|
2018 |
|
|
[189]
|
Characterization And Tribological Behaviour Of Aluminium Metal Matrix Composite
|
|
Journal of Engineering Research and Application,
2018 |
|
|
[190]
|
Effect of ceramic and metallic reinforcement on mechanical, corrosion, and tribological behavior of aluminum composite by adopting design of experiment through …
|
|
2018 |
|
|
[191]
|
Manufacturing of aluminium composite materials: A review
|
|
2018 |
|
|
[192]
|
A Study on the Al2O3 reinforced Al7075 Metal Matrix Composites Wear behavior using Artificial Neural Networks
|
|
Materials Today: Proceedings,
2018 |
|
|
[193]
|
A Study on Mechanical Properties of Al-17Si Metal Matrix Composites
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
[194]
|
Experimental Study of Hematite Reinforced Aluminum Metal Matrix Composites subjected to Equal Channel Angular Pressing
|
|
Materials Today: Proceedings,
2018 |
|
|
[195]
|
Optimization of friction and wear behaviour of Al7075-Al2O3-B4C metal matrix composites using Taguchi method
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
[196]
|
Effect of Processing Parameters on Metal Matrix Composites in Stir Casting Process Using Taguchi
|
|
2018 |
|
|
[197]
|
Multi-Response Optimization of Al2024/red mud MMC using Hybrid Taguchi-GRA-Entropy Optimization Technique
|
|
Materials Today: Proceedings,
2018 |
|
|
[198]
|
Aluminum metal matrix composites a review of reinforcement, mechanical and tribological behavior
|
|
International Journal of Engineering & …,
2018 |
|
|
[199]
|
Controlling factors in aluminum matrix composites fabrication
|
|
Anusandhan,
2018 |
|
|
[200]
|
THE EFFECT OF SILICON CARBIDE (SiC) ON PHYSICAL AND MECHANICAL PROPERTIES OF RECYCLED ALUMINIUM CHIP AA6061
|
|
2018 |
|
|
[201]
|
2. Manufacturing of aluminium composite materials: A review
|
|
2018 |
|
|
[202]
|
MULTI-RESPONSE OPTIMISATION OF PROCESS VARIABLES IN SQUEEZE CASTING OF Al 6063-SiC COMPOSITE
|
|
2018 |
|
|
[203]
|
Comparative Analysis of an SI Engine Block Using Al Alloy and Metal Matrix Composite
|
|
2018 |
|
|
[204]
|
Enhancement of tribological properties of Al 6060 by spray coated TiO2 nanoparticle
|
|
Transactions of the Indian …,
2018 |
|
|
[205]
|
Investigation on properties of SiC reinforced Zn-Mg-Cu based Al metal matrix composites-a case study
|
|
Materials Today …,
2018 |
|
|
[206]
|
Wear study of Al-SiC metal matrix composites processed through microwave energy
|
|
AIP Conference …,
2018 |
|
|
[207]
|
TRIBOLOGICAL BEHAVIOUR OF ALUMINIUM BASED HYBRID METAL MATRIX COMPOSITES
|
|
2018 |
|
|
[208]
|
Modeling of Wear Behavior of AA7068/TiC MMCs Using Fuzzy Logics and Response Surface Model
|
|
Matrix,
2018 |
|
|
[209]
|
Fabrication and experimental analysis of aluminium composites and optimization of process parameters
|
|
2017 |
|
|
[210]
|
Corrosion behavior of Al–Mg–Zn-Si alloy matrix composites reinforced with Y₂O₃ in 3.5% NaCl solution
|
|
Int. J. Electrochem …,
2017 |
|
|
[211]
|
СТРУКТУРА И СВОЙСТВА СПЛАВА АК7, МОДИФИЦИРОВАННОГО КОМПОЗИЦИОННОЙ КАРБИДО-КОРУНДОВОЙ НАНОДОБАВКОЙ
|
|
2017 |
|
|
[212]
|
Characterization and Mechanical Properties of Al2024/Sic Metal Matrix Composites
|
|
International Journal of Research in Engineering and Science,
2017 |
|
|
[213]
|
Assessment of the density and mechanical properties of particulate periwinkle shell-aluminium 6063 metal matrix composite (PPS-ALMMC) produced by two …
|
|
2017 |
|
|
[214]
|
Effect of lubrication on sliding wear of red mud particulate reinforced aluminium alloy 6061
|
|
Tribology in …,
2017 |
|
|
[215]
|
Wear response of aluminium 6061 composite reinforced with red mud at elevated temperature
|
|
Tribology in Industry,
2017 |
|
|
[216]
|
Investigation on Mechanical Properties and Analysis of Dry Sliding Wear Behavior of Al LM13/AlN Metal Matrix Composite Based on Taguchi's Technique
|
|
Journal of Tribology,
2017 |
|
|
[217]
|
FINITE ELEMNT ANALYSIS OF TENSILE STRENGTH AND CHARACTERIZATION OF LM13 METAL MATRIX COMPOSITE
|
|
2017 |
|
|
[218]
|
Mechanical and tribological behavior of the metal matrix composite AA6061/ZrO2/C
|
|
Journal of Mechanical Science and Technology,
2017 |
|
|
[219]
|
Exploration of Mechanical behaviour and Wear Behaviour of Al 4 C 3 Reinforced Aluminium Metal Matrix Composites
|
|
Materials Today: Proceedings,
2017 |
|
|
[220]
|
Wear Response of Aluminium 6061 Composite Reinforced with Red Mud at Elevated Temperature.
|
|
Tribology in Industry,
2017 |
|
|
[221]
|
Review on Effect of Various Types of Reinforcement Particles on Mechanical Behavior of 6061 and 7075 Aluminium Alloy Matrix Composite
|
|
2017 |
|
|
[222]
|
Microstructure analysis and mechanical behaviors of Al6063 reinforced with B4C and red soil metal matrix composite
|
|
2017 |
|
|
[223]
|
Residual Stress Induced Mechanical Property Enhancement in Steel Encapsulated Light Metal Matrix Composites
|
|
Materials Science and Engineering: A,
2017 |
|
|
[224]
|
Development and Comparative Studies of Aluminum-Based Carbon Nano Tube Metal Matrix Composites using Powder Metallurgy and Stir Casting Technology
|
|
International Journal of Scientific & Engineering Research,
2017 |
|
|
[225]
|
Effect of sol–gel prepared nanoalumina reinforcement content on the corrosion resistances of Al 6061‐Al2O3 nanocomposite in 3.5% NaCl solution
|
|
Materials and Corrosion,
2017 |
|
|
[226]
|
Study of Wear Characteristics of Hematite Reinforced Aluminum Metal Matrix Composites
|
|
Materials Today: Proceedings,
2017 |
|
|
[227]
|
Assessment of some mechanical properties and microstructure of particulate periwinkle shell-aluminium 6063 metal matrix composite (PPS-ALMMC) produced by two …
|
|
Nigerian Journal of Technology,
2017 |
|
|
[228]
|
An experimental investigation on mechanical behaviour of SiCp reinforced Al 6061 MMC using squeeze casting process
|
|
2017 |
|
|
[229]
|
ВОЗДЕЙСТВИЕ СИНТЕЗИРУЕМОЙ НАНОКОМПОЗИЦИИ SiC-Al2O3 НА СТРУКТУРООБРАЗОВАНИЕ И ТРИБОТЕХНИЧЕСКИЕ СВОЙСТВА КОМПОЗИТА НА …
|
|
2017 |
|
|
[230]
|
Effect of Lubrication on Sliding Wear of Red Mud Particulate Reinforced Aluminium Alloy 6061.
|
|
Tribology in Industry,
2017 |
|
|
[231]
|
A Review on The Mechanical Properties of Aluminium Based Metal Matrix Composite via Powder Metallurgy
|
|
2017 |
|
|
[232]
|
Multi-objective Optimization of Mechanical Properties of Aluminium 7075-Based Hybrid Metal Matrix Composite Using Genetic Algorithm
|
|
Advances in 3D Printing & Additive Manufacturing Technologies,
2017 |
|
|
[233]
|
ASSESSMENT OF THE DENSITY AND MECHANICAL PROPERTIES OF PARTICULATE PERIWINKLE SHELL-ALUMINIUM 6063 METAL MATRIX COMPOSITE (PPS-ALMMC) PRODUCED BY TWO-STEP CASTING
|
|
Acta Technica Corvininesis-Bulletin of Engineering,
2017 |
|
|
[234]
|
Effect of ZrO2 on microstructure and wear properties of Al2O3/Al-Si composites
|
|
2017 |
|
|
[235]
|
Fabrication and characterization of the Al6063/5% ZrO2/5% Al2O3 composite
|
|
IOP Conference Series: Materials Science and Engineering,
2017 |
|
|
[236]
|
A Study on Mechanical and Tribological Properties of Aluminium 7075 MMCs Reinforced with Nano Silicon Carbide (SiC), Tur Husk and E-Glass Fiber
|
|
2017 |
|
|
[237]
|
Physical and mechanical behaviour of polysiloxane filled silica sheet
|
|
2017 |
|
|
[238]
|
Fabrication of Aluminium based Metal Matrix Composite using Silicon Carbide Reinforcement and Evaluation of Mechanical Properties
|
|
2017 |
|
|
[239]
|
Influence of Particle Additives on the Lubricated Tribology of Aluminium Metal Matrix Composite
|
|
2017 |
|
|
[240]
|
Tribo-Evaluation of Some Candidate AMMC Discs Sliding Against Automobile Brake Pad
|
|
2017 |
|
|
[241]
|
A study on mechanical and tribological properties of aluminium 7075 MMC's reinforced with nano silicon carbide (sic), tur husk and e-glass fiber
|
|
2017 |
|
|
[242]
|
Wear analysis by Taguchi technique of Al6061 based hybrid composite reinforced with SiC and Al2O3
|
|
2017 |
|
|
[243]
|
EFFECTS OF STIRRING TIME AND PARTICLES PREHEATING ON POROSITY, MECHANICAL PROPERTIES AND MICROSTRUCTURE OF PERIWINKLE …
|
|
2017 |
|
|
[244]
|
Fabrication and Evaluation of Mechanical Properties of AL6061-4% B4C-4% CU Based Composite Experimentally
|
|
2017 |
|
|
[245]
|
Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
|
|
2017 |
|
|
[246]
|
Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites
|
|
IOP Conference Series: Materials Science and Engineering,
2017 |
|
|
[247]
|
Experimental Study of EDM and Electromagnetic Field Assisted EDM for Ni Alloy: AComparative Study
|
|
2017 |
|
|
[248]
|
Effect of Alloying Element on the Integrity and Functionality of Aluminium-Based Alloy
|
|
Aluminium Alloys Recent Trends In Processing Characterization Mechanical Behavior And Applications,
2017 |
|
|
[249]
|
The Properties of an Aluminium Metal Matrix Composites: A Review
|
|
International Journal of Advances in Scientific Research and Engineering (ijasre),
2017 |
|
|
[250]
|
Experimental and Statistical Study on Machinability of the Composite Materials with Metal Matrix Al/B4C/Graphite
|
|
Metallurgical and Materials Transactions A,
2017 |
|
|
[251]
|
Investigation of Microstructural and Mechanical Properties of Al 5083-ZrSiO4-Gr Hybrid Composite
|
|
International Journal of Nanoscience,
2017 |
|
|
[252]
|
Investigation on Tapping of Al6061-SiC Metal Matrix Composite with HSS Taps.
|
|
Pertanika Journal of Science & Technology,
2017 |
|
|
[253]
|
EFFECT OF PARTICLES SIZE ON THE MECHANICAL PROPERTIES OF SiC-REINFORCED ALUMINIUM 8011 COMPOSITES
|
|
2017 |
|
|
[254]
|
MECHANICAL AND TRIBOLOGICAL BEHAVIOR OF AL6061-GLASS PARTICULATE MMCs
|
|
2017 |
|
|
[255]
|
Study of Corrosion Properties of SIC and E-GLASS reinforced al-3003 Hybrid MMC.
|
|
2017 |
|
|
[256]
|
Study of Wear Properties of SiC Particulate And E-Glass Fiber Reinforced Al 3003 Hybrid Metal Matrix Composites
|
|
2017 |
|
|
[257]
|
"Experimental Investigation of Mechanical properties of Bagasse Ash and SiC reinforced Al 7075 alloy matrix hybrid composites manufactured by stir casting method "
|
|
2017 |
|
|
[258]
|
Comparative study on the mechanical and microstructural characterization of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze castin
|
|
journal of Advanced Research,
2017 |
|
|
[259]
|
A STUDY ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF ALUMINIUM 7075 MMCS REINFORCED WITH NANO SILICON CARBIDE (SIC), TUR HUSK …
|
|
2017 |
|
|
[260]
|
Synthesis and Characterization of TiO2 Reinforced Al6061 Composites
|
|
2017 |
|
|
[261]
|
ACTA TECHNICA CORVINIENSIS
|
|
2017 |
|
|
[262]
|
ASSESSMENT OF THE DENSITY AND MECHANICAL PROPERTIES OF PARTICULATE PERIWINKLE SHELL-ALUMINIUM 6063 METAL MATRIX COMPOSITE (PPS …
|
|
2017 |
|
|
[263]
|
ALUMINUM ALLOYS BY DFSP
|
|
2017 |
|
|
[264]
|
Persuade of Reinforcement on the Mechanical Properties and Scrutiny of Process Parameters of the New Hybrid Al7075 Composite Dispersed with B4C and SIC …
|
|
2016 |
|
|
[265]
|
Tribological properties of aluminium metal matrix composites-AA7075 reinforced with titanium carbide (TiC) particles
|
|
2016 |
|
|
[266]
|
In-situ synthesis of aluminum-titanium diboride metal matrix hybrid nanocomposite
|
|
ProQuest Dissertations Publishing,
2016 |
|
|
[267]
|
Investigation on the Hot Workability Characteristics and Deformation Mechanisms of Aluminium Alloy Nanocomposites
|
|
2016 |
|
|
[268]
|
Influence of Reinforcements on Sliding Wear Behavior of Al6061/SiC-Frit Hybrid MMCs
|
|
2016 |
|
|
[269]
|
Preparation of 7075Al-Al4C3 MMC's by Stir Casting and Evaluation of Mechanical and Wear Properties
|
|
IOSR Journal of Mechanical and Civil Engineering,
2016 |
|
|
[270]
|
Influence of Artificial Aging on the Stir Cast Al6061-SiC Metal Matrix Composites under Different Aging Conditions
|
|
2016 |
|
|
[271]
|
Studies on Adhesive Wear Characteristics of Heat Treated Aluminium LM25/AlB 2 Composites.
|
|
Tribology in Industry,
2016 |
|
|
[272]
|
Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide
|
|
Advances in Materials Science and Engineering,
2016 |
|
|
[273]
|
Analysis of improvements in technologicalproperties of WC-Co tool materials fabricated by sparkplasmasintering
|
|
Journal of Achievements in Materials and Manufacturing Engineering,
2016 |
|
|
[274]
|
Application of Grey-Taguchi Technique for Optimization of Process Parameters for Wear Behavior on AA7075-TiC Metal Matrix Composites
|
|
2016 |
|
|
[275]
|
Optimisation of process parameters for minimum volumetric wear rate on AA7075-TiC metal matrix composite.
|
|
2016 |
|
|
[276]
|
Effect of Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of Al6061-SiCp Composites
|
|
IOP Conference Series: Materials Science and Engineering,
2016 |
|
|
[277]
|
Evaluation of Intermetallic Reaction Layer Formation Within Steel Encapsulated Metal Matrix Composites
|
|
TMS 2016 145th Annual Meeting & Exhibition,
2016 |
|
|
[278]
|
Effect of Carbon Fiber Rod Reinforcement on Slurry Erosive Behavior of Al6061 Composites
|
|
Procedia Technology,
2016 |
|
|
[279]
|
Effect of Alumina on Green Properties of Al-Fe-Cr Powder Composites
|
|
2016 |
|
|
[280]
|
Machining of Aluminum Hybrid Metal Matrix Composite by Wire Electrical Discharge Machine: A Review
|
|
IUP Journal of Mechanical Engineering,
2016 |
|
|
[281]
|
Microstructural evolution in WC-Co cermet reinforced-A17075 metal matrix composites by stir casting
|
|
IOP Conference Series: Materials Science and Engineering,
2016 |
|
|
[282]
|
The Dry-Sliding Wear Behavior of Aluminium Alloy/SiC Metal Matrix Composites
|
|
International Journal of Advances in Scientific Research and Engineering,
2016 |
|
|
[283]
|
This copy is for personal use only-distribution prohibited.
|
|
2016 |
|
|
[284]
|
Enhanced Mechanical Properties of Al-6061 Metal Matrix Composites Reinforced with α-Al2O3 Nanoceramics
|
|
2016 |
|
|
[285]
|
Tribological properties of Aluminium Metal Matrix Composites (AA7075 Reinforced with Titanium Carbide (TiC) Particles)
|
|
2016 |
|
|
[286]
|
Tensile And Hardness Behavior Of Aluminum 7075 And Zinc And Chromium Metal Matrix Composite By Stir-Casting Route
|
|
2016 |
|
|
[287]
|
Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review
|
|
Procedia Technology,
2016 |
|
|
[288]
|
Study of Wear Behavior and Mechanical Mixed Layer on Artificial Aged Al6061 Composite Reinforced with B4C Particles
|
|
2016 |
|
|
[289]
|
Machinability Study on Drilling of Al7075/Al2O3P/GRP Hybrid Metal Matrix Composites
|
|
2016 |
|
|
[290]
|
Analysis Of Mechanical Properties On Hybrid Metal Matrix Composite
|
|
2016 |
|
|
[291]
|
Aluminium Oxide Particulate Reinforced Friction Stir Welded Joint of Aluminium Alloy 6061
|
|
2016 |
|
|
[292]
|
TRIBOLOGICAL AND CORROSION BEHAVIOUR OF AL 6063/SIC METAL MATRIX COMPOSITES
|
|
2016 |
|
|
[293]
|
Синтез комплексного нанонаполнителя SIC-AL2O3, получение армированного им композиционного материала на основе сплава АК12М2МгН
|
|
2016 |
|
|
[294]
|
Establishing the Relationship Between Fatigue and Tensile Strength of Frictionally Joined Metal Matrix Nanocomposite Autogeneous Joints for Aerospace
|
|
Transactions of the Indian Institute of Metals,
2016 |
|
|
[295]
|
Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy
|
|
Materials & Design,
2016 |
|
|
[296]
|
Study on Mechanical Properties and Microstructure of Aluminium Alloy 63401 Reinforced with Alumina Powder
|
|
2016 |
|
|
[297]
|
INVESTIGATION ON MECHANICAL PROPERTIES OF AL 7075-AL2O3 METAL MATRIX COMPOSITE
|
|
2016 |
|
|
[298]
|
DESIGN AND DEVELOPMENT OF A METAL MATRIX COMPOSITE FOR AERONAUTICAL APPLICATIONS-AN ASSESSMENT
|
|
International Journal of Research in Mechanical, Mechatronics and Automobile Engineering,
2016 |
|
|
[299]
|
СИНТЕЗ КАРБИДО-КОРУНДОВОГО НАПОЛНИТЕЛЯ И ЕГО ВОЗДЕЙСТВИЕ НА СТРУКТУРУ И СВОЙСТВА ПОРШНЕВОГО СПЛАВА АК12М2МгН
|
|
2016 |
|
|
[300]
|
Analysis on mechanical properties of zircon and Al2o3 of aluminium metal matrix composite
|
|
Advances in Natural and Applied Sciences,
2016 |
|
|
[301]
|
Mechanical Behavior of Silicon Carbide Reinforced Friction Stir Welded Joint of Aluminium Alloy 6061
|
|
2016 |
|
|
[302]
|
Investigation of Surface Roughness and Burr Height of Al/Al2O3/Gr Metal Matrix Composite for Various Drilling Parameters
|
|
2016 |
|
|
[303]
|
Application of Taguchi Method to Study the Effects of Process Parameters on the Hardness of Composite Material Al 6063 and SiC
|
|
2016 |
|
|
[304]
|
Influence of Extrusion Process on Mechanical and Tribological Properties of Aluminium A356-Al2O3 Stir Cast MMC
|
|
2016 |
|
|
[305]
|
APPLICATIONS OF METAL MATRIX COMPOSITES- AN OVERALL ASSESSMENT
|
|
International Journal of Research in Mechanical, Mechatronics and Automobile Engineering,
2016 |
|
|
[306]
|
Dry sliding wear behaviour of a novel 6351 Al-Al4SiC4 composite at high loads
|
|
Canadian Metallurgical Quarterly,
2016 |
|
|
[307]
|
Studies on adhesive wear characteristics of heat treated aluminium LM25/AlB2 composites
|
|
Tribology in Industry,
2016 |
|
|
[308]
|
Investigation of Mechanical Properties of Al356 Metal Matrix Composites
|
|
Trends in Mechanical Engineering & Technology,
2016 |
|
|
[309]
|
Machining of Aluminum Hybrid Metal Matrix Composite by Wire Electrical Discharge Machine: A Review.
|
|
2016 |
|
|
[310]
|
Tribological and corrosion behaviour of Al6063 metal matrix composites. t J. of Adv
|
|
2016 |
|
|
[311]
|
Study of Wear Behavior and Mechanical Mixed Layer on Artificial Aged Al6061 Composite Reinforced with B
|
|
2016 |
|
|
[312]
|
Experimental investigations on mechanical behavior of aluminium metal matrix composites
|
|
2016 |
|
|
[313]
|
Developing Short Milled Carbon Fibre Modified Toughened Epoxy Matrix for Superior and Inexpensive infrastructural CFRP Laminates
|
|
2016 |
|
|
[314]
|
CERCETĂRI PRIVIND CARACTERISTICILE TRIBOLOGICE ALE COMPOZITELOR Al-SiC-Grafit
|
|
2015 |
|
|
[315]
|
Effect of hybrid reinforcement on mechanical behavior of Aluminium matrix composite
|
|
Int J Eng Res Technol (IJERT),
2015 |
|
|
[316]
|
Wear behavior of aluminum alloy 6061-based composites reinforced with SiC, Al2O3, and red mud: a comparative study
|
|
Jom,
2015 |
|
|
[317]
|
The effect of multidimensional curriculum on environmental knowledge, attitude and skill of preschoolers
|
|
Gazi Univertesi Gazi Egitim Fakultesi Dergisi,
2015 |
|
|
[318]
|
Multi-response optimization of process parameters using Taguchi method and grey relational analysis during turning AA 7075/SiC composite in dry and spray cooling environments
|
|
International Journal of Industrial Engineering Computations,
2015 |
|
|
[319]
|
Optimisation of Spindle Speed and Feed Rate for Drilling of Al-SiCp Metal Matrix Composites using ANOVA and Genetic Algorithm
|
|
International Journal of Vehicle Structures & Systems,
2015 |
|
|
[320]
|
Review the Properties of Al7075 Matrix Composites
|
|
Journal of Material Science and Mechanical Engineering,
2015 |
|
|
[321]
|
Enhancement of Hardness Related Properties of Grey Cast Iron Powder Reinforced AA7075 Metal Matrix Composites through T6 and T8 Heat Treatments
|
|
2015 |
|
|
[322]
|
Evaluation of mechanical and thermal properties of silicon carbide and graphite reinforced hybrid metal matrix composite
|
|
2015 |
|
|
[323]
|
Effect of Heat Treatment Variables on the Abrasive Wear Behaviour of Al-6061 Alloy and Al 6061-SiC P Composites Using Taguchi Technique
|
|
American Journal of Materials Science,
2015 |
|
|
[324]
|
Optimization of FSW Process Parameters for AlSiC p PRMMC Using ANOVA
|
|
Materials Today: Proceedings,
2015 |
|
|
[325]
|
Dry Sliding Wear Behavior of Al 2219/Al2O3-MoS2 Metal Matrix Hybrid Composites Produced by Stir Casting Route.
|
|
International Journal of Engineering Research,
2015 |
|
|
[326]
|
Wear Behavior and Micro-structural Study of Al/Al 2 O 3 Nano-composites Before and After Heat Treatment
|
|
Materials Today: Proceedings,
2015 |
|
|
[327]
|
Physico-Chemical Characterization of Novel Epoxy Matrix System Reinforced with Recycled Short Milled Carbon Fibre
|
|
Journal of Minerals and Materials Characterization and Engineering,
2015 |
|
|
[328]
|
Tribological behavior of heat treated Al 7075 aluminium metal matrix composites
|
|
Indian Journal of Engineering & Materials Sciences,
2015 |
|
|
[329]
|
Synthesis of new aluminum nano hybrid composite liner for energy saving in diesel engines
|
|
Energy Conversion and Management,
2015 |
|
|
[330]
|
Developing and analyzing the Mechanical Properties of industrial Aluminum-Bronze AB-1-RHA metal matrix composite
|
|
2015 |
|
|
[331]
|
Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with SiC and Al2O3 Hybrid Metal Matrix Composites
|
|
Applied Mechanics and Materials,
2015 |
|
|
[332]
|
Study of Mechanical Behaviour of Aluminium Matrix Composite by Analytical and Experimental Approach
|
|
2015 |
|
|
[333]
|
Mechanical Properties of Aluminum 6063 Alloy based Graphite Particles Reinforced Metal Matrix Composite
|
|
2015 |
|
|
[334]
|
OPTIMIZATION TECHNIQUE TO STUDY DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM ALLOY 2218 BASED SELF LUBRICATING COMPOSITE MATERIALS
|
|
International Journal of Advance Research and Innovative Ideas in Education,
2015 |
|
|
[335]
|
Mechanical Properties of Steel Encapsulated Metal Matrix Composites
|
|
Advanced Composites for Aerospace, Marine, and Land Applications II,
2015 |
|
|
[336]
|
Effect of heat treatment variables on the abrasive wear behaviour of Al-6061 Alloy and Al 6061-SiCP composites using Taguchi Technique
|
|
2015 |
|
|
[337]
|
Studies On Mechanical And Tribological Properties Of Aluminum Based Metal Matrix Composites–A Review
|
|
2015 |
|
|
[338]
|
Study on mechanical properties of Al 7075 based metal matrix composites
|
|
2015 |
|
|
[339]
|
Mechanical And Tribological Characterization Of Particulate Filled Al7075 Alloy Hybrid Composites For Piston Ring Material...
|
|
2015 |
|
|
[340]
|
Analysis on Mechanical Behaviour of AA 1050/SiC and AA 1050/Al2O3 Composites
|
|
2015 |
|
|
[341]
|
Experimental Investigation on Parametrical Changes and Texture Analysis on Al6063/Al2o3 Metal Matrix Composite by Wire-Cut Electric Discharge Machining …
|
|
2015 |
|
|
[342]
|
Effect of silicon carbide percentage on fracture toughness of aluminum silicon carbide metal matrix composites
|
|
2014 |
|
|
[343]
|
Review on effect of hybrid reinforcement on mechanical behavior of aluminium matrix composite
|
|
2014 |
|
|
[344]
|
EXPERIMENTAL ANALYSIS OF THERMOPHYSICAL AND MECHANICAL CHARACTERISTICS OF AlSiCp METAL MATRIX COMPOSITE
|
|
2014 |
|
|
[345]
|
ASSESSMENT OF HARDNESS AND TENSILE PROPERTIES OF STIR-CAST ALUMINIUM MATRIX REINFORCED WITH TETRACARPIDIUM CONOPHORUM KERNEL
|
|
International Journal of Engineering,
2014 |
|
|
[346]
|
Alumina particle reinforced TiO2 composite films grown by direct liquid injection MOCVD
|
|
Vacuum,
2014 |
|
|
[347]
|
Exploration of mechanical behavior of Al2O3 reinforced aluminium metal matrix composites
|
|
2014 |
|
|
[348]
|
Tensile and dry sliding wear behavior of Al7075-Al2O3 glass composites
|
|
IOSRD International Journal of Engineering,
2014 |
|
|
[349]
|
Characterization of Al-Fe-Cr-Al2O3 composites with varying weight percentage of alumina fabricated through mechanical alloying
|
|
International Journal of Applied Science and Engineering Research,
2014 |
|
|
[350]
|
Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites
|
|
Procedia Engineering,
2014 |
|
|
[351]
|
Investigations on the electric discharge machining of aluminium metal matrix composites MMCS and Aluminium Metal Matrix Nano Composites Mmncs
|
|
2014 |
|
|
[352]
|
Dry Sliding Wear and Friction of Aluminium Alloy Silicon Carbide Particulates Reinforced Composites
|
|
International Journal of Vehicle Structures & Systems,
2014 |
|
|
[353]
|
CORROSION BEHAVIOUR OF COLD DEFORMED AND SOLUTION HEAT-TREATED ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITES IN 0.3 MH2 SO4 SOLUTION
|
|
Acta Technica Corviniensis-Bulletin of Engineering,
2014 |
|
|
[354]
|
Preparation and Mechanical Characterization of Stir Cast Hybrid Al7075-Al2O3-B4C Metal Matrix Composites
|
|
Applied Mechanics & Materials,
2014 |
|
|
[355]
|
Studies on mechanical and tribological behaviour of particulate Aluminium metal matrix composites
|
|
2014 |
|
|
[356]
|
Effects of Reinforced Particulates on Properties of Aluminium Metal Matrix Composite
|
|
AISECT University Journal,
2014 |
|
|
[357]
|
Preparation, Characterization and Machinability of Al7075-Al2O3 Matrix Composite Using Multi Layer Coated Carbide Insert
|
|
Procedia Materials Science,
2014 |
|
|
[358]
|
High-precision machining of aspheric mirror surfaces for the space cryogenic infrared telescope
|
|
Proceedings of the International Conference of Manufacturing Technology Engineers (ICMTE),
2014 |
|
|
[359]
|
Fabrication, Surface Morphology and Corrosion Investigation of Al 7075-Al2O3 Matrix Composite in Sea Water and Industrial Environment
|
|
Procedia Engineering,
2014 |
|
|
[360]
|
A study on ultra-precision machining technique for Al6061-T6 to fabricate space infrared optics
|
|
SPIE Astronomical Telescopes+ Instrumentation,
2014 |
|
|
[361]
|
Machining Behavior of Al6061-Fly Ash Composites
|
|
Procedia Materials Science,
2014 |
|
|
[362]
|
Fabrication and heat treatment of ceramic-reinforced aluminium matrix composites-a review
|
|
International Journal of Mechanical and Materials Engineering,
2014 |
|
|
[363]
|
Mechanical and Microstructure Characterization of A356 (Al/SiC) MMC
|
|
Advanced Materials Research,
2014 |
|
|
[364]
|
EFFECT OF SILICON CARBIDE PERCENTAGE ON FRACTURE TOUGHNESS OF ALUMINIUM SILIOCN CARBIDE METAL MATRIX COMPOSITES
|
|
2014 |
|
|
[365]
|
Experimental Investigation of Al6061/Al2O3 Composite and Analysis of its Mechanical Properties on Onshore Wind Tower using Hybrid Technique for Indian Condition
|
|
Procedia Materials Science,
2014 |
|
|
[366]
|
DEFORMED AND SOLUTION HEAT-TREATED ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITES IN 0.3 MH2so4 SOLUTION
|
|
2014 |
|
|
[367]
|
STUDY OF WEAR BEHAVIOUR OF Al/(Al2O3P and SiCP) HYBRID METAL MATRIX COMPOSITES
|
|
Malaysian Journal of Science,
2014 |
|
|
[368]
|
Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075-TiC Metal Matrix Composites
|
|
Applied Mechanics …,
2014 |
|
|
[369]
|
Review on Effect of Hybrid Reinforcement on Mechanical Behavior of Aluminium Matrix Composite.
|
|
2014 |
|
|
[370]
|
CORROSION BEHAVIOUR OF COLD DEFORMED AND SOLUTION HEAT-TREATED ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITES IN 0.3 MH …
|
|
2014 |
|
|
[371]
|
Development of a Novel Cast 6351 Al-Al 4 SiC 4 In Situ Composite
|
|
2013 |
|
|
[372]
|
PENGARUH TEMPERATUR HOT-PRESS TERHADAP KARAKTERISTIK KOMPOSIT AC8A/SICP
|
|
2013 |
|
|
[373]
|
MECHANICAL BEHAVIOUR OF ALUMINA REINFORCED AA 6063 METAL MATRIX COMPOSITES DEVELOPED BY TWO STEP–STIR CASTING PROCESS
|
|
Acta Technica Corvininesis-Bulletin of Engineering,
2013 |
|
|
[374]
|
Optimization of Process Parameters of CNC Milling for Aluminium Metal Matrix Composite
|
|
2013 |
|
|
[375]
|
Review on Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Composites
|
|
International Journal of Current Engineering and Technology,
2013 |
|
|
[376]
|
MECHANICAL BEHAVIOUR OF ALUMINIUM 6061 ALLOY REINFORCED WITH Al2O3 & GRAPHITE PARTICULATE HYBRID METAL MATRIX COMPOSITES
|
|
International Journal of Research in Engineering & Technology,
2013 |
|
|
[377]
|
Production of Aluminium AC8H/Al2O3p Coated Metal Matrix Composites by Stir Casting Route
|
|
KMUTNB: International Journal of Applied Science and Technology,
2013 |
|
|
[378]
|
Effect of Machining Parameters on MRR and Surface Roughness in Machining of ZA43/SiCp Composite by WEDM
|
|
International Journal of Applied Science and Engineering,
2013 |
|
|
[379]
|
Microstructural characterisation of novel 6351 Al-Al4SiC4 in-situ composite
|
|
Materials Science and Technology,
2013 |
|
|
[380]
|
Development of a Novel Cast 6351 Al-Al4SiC4 In Situ Composite
|
|
Journal of materials engineering and performance,
2013 |
|
|
[381]
|
Development of a novel 6351 Al–(Al4 SiC4+ SiC) hybrid composite with enhanced mechanical properties
|
|
Materials Science and Engineering: A,
2013 |
|
|
[382]
|
Individual and Combined Effect of Reinforcements on Stir Cast Aluminium Metal Matrix Composites-A Review
|
|
International Journal of Current Engineering and Technology,
2013 |
|
|
[383]
|
EFFECT ON PROPERTIES OF ALUMINUM BY ADDING ALUMINA SLAG AS A STRENGTHENER
|
|
2013 |
|
|
[384]
|
Production and Tribological Characterization of Stir-Cast Hybrid Composite Aluminium 6061 Reinforced with Sic and Ti Particulates
|
|
International Journal of Innovative Research and Development,
2013 |
|
|
[385]
|
Tribological behaviour of AA 5083/Micron and Nano SiC composites fabricated by ultrasonic assisted stir casting process
|
|
International Journal of Scientific and Research Publications,
2013 |
|
|
[386]
|
Preparation and Property Evaluation of Aluminium alloy (6061) Reinforced with Bottom Ash Particulate composite (ALBAP Composite)
|
|
International Journal of Science Research,
2013 |
|
|
[387]
|
Influence of B 4 C on the tribological and mechanical properties of Al 7075–B 4 C composites
|
|
Composites Part B: Engineering,
2013 |
|
|
[388]
|
Mechanical Behaviour of Cold Deformed and Solution Heat-treated Alumina Reinforced AA 6063 Metal Matrix Composites
|
|
The West Indian Journal of Engineering,
2013 |
|
|
[389]
|
AN APPROACH FOR IMPROVING WEAR RATE OF ALUMINUM BASED METAL USING RED MUD, SIC AND Al
|
|
International Journal of Mechanical Engineering and Robotics Research,
2013 |
|
|
[390]
|
Effect of reinforcement percentage on wear behavior of SiCp reinforced ZA43 alloy metal matrix composites
|
|
Science and Engineering of Composite Materials,
2013 |
|
|
[391]
|
Fabrication and characterization of SiC, Al2O3 and B4C reinforced Al-Zn-Mg-Cu alloy (AA 7075) metal matrix composites: a study
|
|
Advanced Materials Research,
2013 |
|
|
[392]
|
A review on the state of art of wear characteristics of aluminium alloy metal matrix composites
|
|
Journal of the Balkan Tribological Association,
2013 |
|
|
[393]
|
Investigation of tribological behavior and its relation with processing and microstructures of Al 6061 metal matrix composites
|
|
International Journal of Research in Engineering & Technology (IJRET),
2013 |
|
|
[394]
|
Design, Fabrication and Analysis of Torque Transducer
|
|
2013 |
|
|
[395]
|
Effect of process parameters on corrosion rate of friction stir welded aluminium SiC–Gr hybrid composites
|
|
Corrosion Engineering, Science and Technology,
2013 |
|
|
[396]
|
Effect of Al2O3 Particles on Mechanical and Wear Properties of 6061al Alloy Metal Matrix Composites
|
|
Journal of Material Sciences & Engineering,
2013 |
|
|
[397]
|
Mechanical behaviour of alumina reinforced AA 6063 metal matrix composites developed by two step-stir casting process
|
|
Acta Technica Corviniensis-bulletin of engineering,
2013 |
|
|
[398]
|
Investigations for Machining of AL/SiC MMC with various percentages of SiC Reinforcements During EDM
|
|
International Journal of Engineering Research & Technology,
2013 |
|
|
[399]
|
Mechanical and microstructural characterization of AA6061 reinforced with SiC particles
|
|
2012 |
|
|
[400]
|
Production and age-hardening behavior of borax premixed SiC reinforced Al-Mg-Si alloy composites developed by double stir-casting technique
|
|
2012 |
|
|
[401]
|
Evaluation Of Mechanical And Tribological Properties Of Aluminium Based Hybrid Metal Matrix Composites
|
|
2012 |
|
|
[402]
|
Studying the dry sliding wear behavior of Al-4% Cu/SiC metal matrix composite with heat treatment
|
|
Tikrit Journal of Pure Science,
2012 |
|
|
[403]
|
PROCESSING, CHARACTERIZATION AND EROSION WEAR RESPONSE OF PARTICULATE FILLED ZA-27 METAL MATRIX COMPOSITES
|
|
Thesis (MTech by Research),
2012 |
|
|
[404]
|
Processing Parameters Effect on Friction Stir Welded Aluminum Matrix Composites Wear Behavior
|
|
2012 |
|
|
[405]
|
PREPARATION AND EVALUATION OF MECHANICAL AND WEAR PROPERTIES OF Al6061 REINFORCED WITH GRAPHITE AND SiC PARTICULATE METAL MATRIX COMPOSITES
|
|
International Journal of Mechanical Engineering and Robotics Research,
2012 |
|
|
[406]
|
Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)–silicon carbide particulate composites
|
|
Scientia Iranica,
2012 |
|
|
[407]
|
An Overview On Development Of Aluminium Metal Matrix Composites With Hybrid Reinforcement
|
|
IJSR, India online ISSN,
2012 |
|
|
[408]
|
Effect of particle size on mechanical properties and tribological behaviour of aluminium/fly ash composites
|
|
Science and Engineering of Composite Materials,
2012 |
|
|
[409]
|
Analysis of Parameters Influencing Wear and Frictional Behavior of Aluminum–Fly Ash Composites
|
|
Tribology Transactions,
2012 |
|
|
[410]
|
Effect of processing parameters on friction stir welded Aluminum matrix composites wear behavior
|
|
Materials and Manufacturing Processes,
2012 |
|
|
[411]
|
Mechanical behaviour of aluminium based metal matrix composites reinforced with aluminium oxide
|
|
2012 |
|
|
[412]
|
An Experimental investigation of Mechanical behavior of Aluminum by adding SiC and Alumina
|
|
International Journal on Emerging Technologies,
2012 |
|
|
[413]
|
Studies on properties of as-cast Al6061-WC-Gr hybrid MMCs
|
|
Journal of Composite Materials,
2012 |
|
|
[414]
|
FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites
|
|
Journal of Minerals and Materials Characterization and Engineering,
2012 |
|
|
[415]
|
Mechanical behaviour of aluminium based metal matrix composites reinforced with SIC and Alumina
|
|
2011 |
|
|
[416]
|
Corrosion behavior of alumina reinforced aluminium (6063) metal matrix composites
|
|
Journal of Minerals and Materials Characterization and Engineering,
2011 |
|
|
[417]
|
TEM INVESTIGATION OF MATRIX-SAFFIL? FIBER INTERFACES IN ALUMINIUM ALLOYS BASED COMPOSITES
|
|
Acta Metallurgica Slovaca,
2011 |
|
|
[418]
|
Synthesis and Property Evaluation of Al7075-Al2O3 Composites
|
|
Biometrics and Bioinformatics,
2011 |
|
|
[419]
|
Microstructure and tensile properties of composites with high strength aluminium alloys matrix reinforced with Saffil™ fibers
|
|
Kompozyty,
2011 |
|
|
[420]
|
The Effect of (á-Al2O3) Volume Fraction on The Mechanical Properties of (Al-Alumina) Metal Matrix Composite
|
|
Engineering and Technology Journal,
2011 |
|
|
[421]
|
Microstructure and tensile properties of composities with high strength aluminium alloys matrix reinforced with Saffil™ fibers
|
|
2011 |
|
|
[422]
|
WEAR BEHAVIOUR OF ALUMINIUM BASED METAL MATRIX COMPOSITES REINFORCED WITH RED MUD, SiC
|
|
2011 |
|
|
[423]
|
Mechanical and tribological properties of As-cast Al6061-Tungsten carbide metal matrix composites
|
|
Material Science Research India,
2010 |
|
|
[424]
|
Compacting Characteristics of Aluminum-10 wt% Fly Ash-Lead Metal Matrix Composites
|
|
International Journal of Materials Science,
2010 |
|
|
[425]
|
Effects of Al-SiC Composite Tool Fabricated through Stir Casting Method on Process Parameters of EDM
|
|
|
|
|
[426]
|
ALUMINIUM OXIDE (Al2O3)-FEW LAYER GRAPHENE (FLG) REINFORCED ALUMINIUM HYBRID COMPOSITES
|
|
|
|
|
[427]
|
Enhancement of Tribological Properties of Al 6060 by Spray Coated TiO Nanoparticle
|
|
M Sam, BA Guhan
|
|
|
[428]
|
Investigation of Mechanical Properties of Aluminium356 reinforced with Nano Alumina and Studying the effect of addition of MoS2 on Aluminum …
|
|
|
|
|
[429]
|
INFLUENCE OF THE STRUCTURE OF MINERAL-CERAMIC ABRASIVE MATERIAL ON THE OPERATIONAL PARAMETERS AND MORPHOLOGY OF THE …
|
|
|
|
|