Manufacture of Single Cotton Fabric with New Composition, Specified Bend from Yarn Gathered from Local Raw Material Cotton Fiber ()
ABSTRACT
The article created 21 types of fabrics for the new composition of
dublerin. Tests of various types of weave, fiber composition
and yarn count are shown in various ways. The
physical and mechanical parameters of the test samples were determined and
analyzed at the “Accredited Testing Laboratory for Light Industry Products” at
the State Unitary Enterprise “Namangan Center for Testing and Certification”.
The reason for such a low performance of the motos of number 15 produced in the
scientific research work is that the linear densities of the body and the yarn
are four times different, despite the weaving of the fabric. Elongation at
break is also dependent on penetration.
Share and Cite:
Ugli, D. and Mirkarimovich, M. (2023) Manufacture of Single Cotton Fabric with New Composition, Specified Bend from Yarn Gathered from Local Raw Material Cotton Fiber.
Journal of Textile Science and Technology,
9, 244-252. doi:
10.4236/jtst.2023.94016.
Cited by
No relevant information.