Author(s)

Alcínia Zita Sampaio^1,2*, Augusto Martins Gomes^1,2, Paulo Manuel Sequeira¹, Gonçalo Ferreira Azevedo¹

¹Department of Civil Engineering, University of Lisbon, Lisbon, Portugal.
²CERIS—Civil Engineering Research and Innovation for Sustainability, Lisbon, Portugal.

Building Information Modelling (BIM) is a methodology focused on the centralization and sharing of the project information among all professionals involved, supported on the generation and manipulation of a three-dimensional (3D) digital BIM model. This methodology allows a close collaboration between the architect and the structural engineer and an adequate manipulation of the structural BIM model database, on the definition of multitasks. The collaboration allowed between all disciplines, avoid the detection of conflicts and data omission after in the construction place. Two BIM structural design cases were developed, using Revit as the modelling system and Robot as the structural software. Concerning the structural project the interoperability capacity between the software is still a limitation that engineers must be warned of. In the present study, the benefits and limitations identified within the communication and integration of distinct disciplines and on the development of most frequent multitasks normally related with a structural project, were considered.

BIM, Structural Project, Communication, Integration, Interoperability, Multitasks

Sampaio, A. , Gomes, A. , Sequeira, P. and Azevedo, G. (2023) BIM Supporting the Development of Multitasks Related with the Structural Project. Journal of Software Engineering and Applications, 16, 397-419. doi: 10.4236/jsea.2023.168020.