Author(s)

Duhwan Kim, Sunggu Lee

Department of Electric Engineering, Pohang University of Science and Technology, Pohang, Korea.

This paper proposes a hardware-efficient implementation of division, which is useful for image processing in WSN edge devices. For error-resilient applications such as image processing, accurate calculations can be unnecessary overhead, and approximate computing that obtains circuit benefits from inaccurate calculations is effective. Since there are studies showing sufficient performance with few bit operations, this paper proposes a combinational arithmetic circuit design of 16 bits or less. The proposed design is an approximate restoring division circuit implemented with a 2-dimensional array of 1-bit subtractor cells. The main drawback of such a design is the long “borrow-chain” that traverses all of the rows of the 2-dimensional subtractor array before a final stable quotient result can be produced, thereby resulting in a long delay and excessive power dissipation. This paper proposes two approximate subtractor cell designs, named ABSC and ADSC, that break this borrow chain: the first in the vertical direction and the second in the horizontal direction, respectively. The proposed approximate divider designs are compared with an accurate design and previous state-of-the-art designs based on accuracy and hardware overhead. The proposed designs have accuracy levels that are close to the best accuracy levels achieved by previous state-of-the-art approximate divider designs. In addition, the proposed ADSC design had the lowest delay, area, and power characteristics. Finally, the implementation of both proposed designs for two practical applications showed that both designs provide sufficient division accuracy.

Approximate Computing, Division, Energy Efficiency, Low Latency Arithmetic

Kim, D. and Lee, S. (2022) Hardware-Efficient Approximate Dividers for Image Processing in WSN Edge Devices. Wireless Sensor Network, 14, 1-22. doi: 10.4236/wsn.2022.141001.