Author(s)

Koko Koko Joseph¹, Nneme Nneme Léandre¹, Ndjakomo Essiane Salomé²

¹Laboratory of Computer and Automatic Engineering, UFD of Engineering Sciences, ENSET, University of Douala, Douala, Cameroon.
²Higher Normal School of Technical Education ENSET of EBOLOWA, University of Yaoundé, Yaoundé, Cameroon.

The use of an electrical network as close as possible to its limits can lead to its instability in the event of a high amplitude disturbance. The damping of system oscillations can be achieved by conventional means of voltage and speed regulation but also by FACTS (Flexible AC Transmission Systems) devices, which are increasingly used in power networks. In this work, optimal control coordination between a hybrid power flow controller and a three-level inverter was used to improve the transient stability of a transmission line. The UPFC is a combination of a serial compensator (SSSC) and a parallel compensator (STATCOM) both connected to a DC-LINK DC bus. The SSSC acts as a voltage source for the network and injects a voltage that can be adjusted in phase and amplitude in addition to the network voltage; the STATCOM acts as a current source. The approach used is tested in the Matlab Simulink environment on a single machine network. Optimal controller tuning gives a better transient stability improvement by reducing the transport angle oscillations from 248.17% to 9.85%.

FACTS, UPFC, Three-Stage Inverter, PI, Power Transit, Transient Stability

Joseph, K. , Léandre, N. and Salomé, N. (2020) Contribution to the Optimization of the Transient Stability of an Electric Power Transmission Network Using a Universal Power Flow Compensator Controlled by a Three-Stage Inverter. World Journal of Engineering and Technology, 8, 675-688. doi: 10.4236/wjet.2020.84048.