Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene

Journals Menu

Follow SCIRP

ISSN Print: 2164-5736
ISSN Online: 2164-5752
www.scirp.org/journal/ojopm
E-mail: ojopm@scirp.org

"Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene"
written by Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura,
published by Open Journal of Organic Polymer Materials, Vol.6 No.1, 2016

has been cited by the following article(s):

[1]	Effect of cross‐linking on the mechanical properties, degree of crystallinity and thermal stability of polyethylene vitrimers
	Polymer Engineering …, 2022

[2]	Structure and fracture toughness of thin-wall polypropylene moulded at different injection speeds
	Thin-Walled Structures, 2018

[3]	Mechanical Properties of Gamma-Irradiated Natural Fiber Reinforced Composites
	2018

[4]	Processing condition induced structural evolution in the alternating multi-layer structure during high speed thin-wall injection molding
	Polymer, 2016

[5]	Relationship between morphology and electrical properties in PP/MWCNT composites: Processing-induced anisotropic percolation threshold
	Materials Chemistry and Physics, 2016

[1]	Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement Polymer, 2023 DOI:10.1016/j.polymer.2023.125863

[2]	Effect of cross‐linking on the mechanical properties, degree of crystallinity and thermal stability of polyethylene vitrimers Polymer Engineering & Science, 2022 DOI:10.1002/pen.26178

[3]	Effect of cross‐linking on the mechanical properties, degree of crystallinity and thermal stability of polyethylene vitrimers Polymer Engineering & Science, 2022 DOI:10.1002/pen.26178

[4]	Structure and fracture toughness of thin-wall polypropylene moulded at different injection speeds Thin-Walled Structures, 2018 DOI:10.1016/j.tws.2018.01.017

[5]	Mechanical Properties of Gamma-Irradiated Natural Fiber Reinforced Composites Nano Hybrids and Composites, 2018 DOI:10.4028/www.scientific.net/NHC.23.24

[6]	Processing condition induced structural evolution in the alternating multi-layer structure during high speed thin-wall injection molding Polymer, 2016 DOI:10.1016/j.polymer.2016.06.013

[7]	Relationship between morphology and electrical properties in PP/MWCNT composites: Processing-induced anisotropic percolation threshold Materials Chemistry and Physics, 2016 DOI:10.1016/j.matchemphys.2016.06.009

Follow SCIRP