[1]
|
Ultrathin Transparent Nickel Electrodes for Thermoelectric Applications
Advanced Materials Interfaces,
2024
DOI:10.1002/admi.202300705
|
|
|
[2]
|
Synthesis of infinite-layer nickelates and influence of the capping-layer on magnetotransport
Journal of Physics D: Applied Physics,
2023
DOI:10.1088/1361-6463/aca54a
|
|
|
[3]
|
Smart Multifunctional Nano-Inks
2023
DOI:10.1016/B978-0-323-91145-0.00005-0
|
|
|
[4]
|
Smart Multifunctional Nano-inks
2023
DOI:10.1016/B978-0-323-91145-0.00005-0
|
|
|
[5]
|
Solution-processed spin coated multilayer structured nickel oxide thin films for anodic electrochromism
Journal of Applied Electrochemistry,
2023
DOI:10.1007/s10800-022-01807-6
|
|
|
[6]
|
Multicomponent Flux for Improved Penetration and Metallurgical Properties Using A-GTAW
Journal of Materials Engineering and Performance,
2023
DOI:10.1007/s11665-022-07383-2
|
|
|
[7]
|
Highly dispersed Pd nanoparticles on NiO–CuO nanocomposite for efficient ethanol sensing
New Journal of Chemistry,
2023
DOI:10.1039/D3NJ01629C
|
|
|
[8]
|
Solution-processed spin coated multilayer structured nickel oxide thin films for anodic electrochromism
Journal of Applied Electrochemistry,
2023
DOI:10.1007/s10800-022-01807-6
|
|
|
[9]
|
Change of Electrical and Transport Properties of Nickel Oxide by Carrier Concentration and Temperature through First-Principle Calculations
Nanomanufacturing and Metrology,
2023
DOI:10.1007/s41871-023-00215-4
|
|
|
[10]
|
NiO and MWCNT based hole transporting layers for solar cell applications
Bulletin of Materials Science,
2022
DOI:10.1007/s12034-021-02603-2
|
|
|
[11]
|
An effect of metal ions (Cu, Mn) doping on the structural, morphological, optical, photoluminescence, electrical and photocatalytic properties of In2S3 nanoparticles
Optical Materials,
2022
DOI:10.1016/j.optmat.2021.111769
|
|
|
[12]
|
An effect of metal ions (Cu, Mn) doping on the structural, morphological, optical, photoluminescence, electrical and photocatalytic properties of In2S3 nanoparticles
Optical Materials,
2022
DOI:10.1016/j.optmat.2021.111769
|
|
|
[13]
|
Microwave-assisted sol-gel synthesis of CeO2–NiO nanocomposite based NO2 gas sensor for selective detection at lower operating temperature
Journal of the Indian Chemical Society,
2022
DOI:10.1016/j.jics.2022.100369
|
|
|
[14]
|
Instant formation of excellent oxygen evolution catalyst film via controlled spray pyrolysis for electrocatalytic and photoelectrochemical water splitting
Journal of Energy Chemistry,
2022
DOI:10.1016/j.jechem.2021.09.023
|
|
|
[15]
|
Multicomponent Flux for Improved Penetration and Metallurgical Properties Using A-GTAW
Journal of Materials Engineering and Performance,
2022
DOI:10.1007/s11665-022-07383-2
|
|
|
[16]
|
Study on structural, morphological, optical, and luminescence properties of nickel oxide thin-film synthesized by dip-coating technique
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2021.11.378
|
|
|
[17]
|
Copper oxide nanoparticles doped with lanthanum, magnesium and manganese: optical and structural characterization
Royal Society Open Science,
2022
DOI:10.1098/rsos.220485
|
|
|
[18]
|
An effect of metal ions (Cu, Mn) doping on the structural, morphological, optical, photoluminescence, electrical and photocatalytic properties of In2S3 nanoparticles
Optical Materials,
2022
DOI:10.1016/j.optmat.2021.111769
|
|
|
[19]
|
Solution-processed spin coated multilayer structured nickel oxide thin films for anodic electrochromism
Journal of Applied Electrochemistry,
2022
DOI:10.1007/s10800-022-01807-6
|
|
|
[20]
|
Solution-processed spin coated multilayer structured nickel oxide thin films for anodic electrochromism
Journal of Applied Electrochemistry,
2022
DOI:10.1007/s10800-022-01807-6
|
|
|
[21]
|
Copper oxide nanoparticles doped with lanthanum, magnesium and manganese: optical and structural characterization
Royal Society Open Science,
2022
DOI:10.1098/rsos.220485
|
|
|
[22]
|
Electrification of materials processing via microwave irradiation: A review of mechanism and applications
Applied Thermal Engineering,
2021
DOI:10.1016/j.applthermaleng.2021.117003
|
|
|
[23]
|
POD of NDT Techniques Using High Temperature Oxidized Fatigue Cracks in an Aero Engine Alloy
Journal of Nondestructive Evaluation,
2021
DOI:10.1007/s10921-021-00769-7
|
|
|
[24]
|
Electrification of materials processing via microwave irradiation: A review of mechanism and applications
Applied Thermal Engineering,
2021
DOI:10.1016/j.applthermaleng.2021.117003
|
|
|
[25]
|
Structural Morphology and Optical Properties of Nanocomposites based Conducting Polymer
IOP Conference Series: Materials Science and Engineering,
2020
DOI:10.1088/1757-899X/928/7/072140
|
|
|
[26]
|
Nickel Oxide Thin Films Grooved by Laser Processing
IOP Conference Series: Materials Science and Engineering,
2020
DOI:10.1088/1757-899X/928/7/072016
|
|
|
[27]
|
Relationship Processing–Composition–Structure–Resistivity of LaNiO3 Thin Films Grown by Chemical Vapor Deposition Methods
Coatings,
2019
DOI:10.3390/coatings9010035
|
|
|
[28]
|
High-performance multicolor metal-semiconductor-metal Si photodetector enhanced by nanostructured NiO thin film
Journal of Alloys and Compounds,
2019
DOI:10.1016/j.jallcom.2019.05.286
|
|
|
[29]
|
Degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes
Journal of Materials Chemistry A,
2019
DOI:10.1039/C9TA08638B
|
|
|
[30]
|
Photocatalytic and ferromagnetic properties of electrically conducting multifunctional Ni/NiO nanocomposites in amorphous carbon matrix
Materials Science and Engineering: B,
2018
DOI:10.1016/j.mseb.2017.11.017
|
|
|
[31]
|
Improving Uniformity and Reproducibility of Hybrid Perovskite Solar Cells via a Low-Temperature Vacuum Deposition Process for NiOx Hole Transport Layers
ACS Applied Materials & Interfaces,
2018
DOI:10.1021/acsami.7b14499
|
|
|
[32]
|
Improving Uniformity and Reproducibility of Hybrid Perovskite Solar Cells via a Low-Temperature Vacuum Deposition Process for NiOx Hole Transport Layers
ACS Applied Materials & Interfaces,
2018
DOI:10.1021/acsami.7b14499
|
|
|
[33]
|
Ultralong (10K) Cycle-Life and High-Power Li-Ion Storage in Li4Ti5O12 Films Developed via Sustainable Electrophoretic Deposition Process
ACS Sustainable Chemistry & Engineering,
2018
DOI:10.1021/acssuschemeng.7b03787
|
|
|
[34]
|
Ultralong (10K) Cycle-Life and High-Power Li-Ion Storage in Li4Ti5O12 Films Developed via Sustainable Electrophoretic Deposition Process
ACS Sustainable Chemistry & Engineering,
2018
DOI:10.1021/acssuschemeng.7b03787
|
|
|
[35]
|
Influence of substrate temperature on structural, morphological, optical and electrical properties of Bi-doped MnInS 4 thin films prepared by nebuliser spray pyrolysis technique
Journal of Physics and Chemistry of Solids,
2017
DOI:10.1016/j.jpcs.2017.06.004
|
|
|
[36]
|
Inkjet printing of NiO films and integration as hole transporting layers in polymer solar cells
Scientific Reports,
2017
DOI:10.1038/s41598-017-01897-9
|
|
|
[37]
|
Oxidation Characteristics of Porous-Nickel Prepared by Powder Metallurgy and Cast-Nickel at 1273K in Air for Total Oxidation Time of 100 h
Journal of Advanced Research,
2017
DOI:10.1016/j.jare.2017.08.004
|
|
|
[38]
|
Inkjet printing of NiO films and integration as hole transporting layers in polymer solar cells
Scientific Reports,
2017
DOI:10.1038/s41598-017-01897-9
|
|
|
[39]
|
Effect of substrate temperature on structural, morphological, optical and electrical properties of MnIn2S4 thin films prepared by nebulizer spray pyrolysis technique
Materials Science in Semiconductor Processing,
2016
DOI:10.1016/j.mssp.2016.03.008
|
|
|
[40]
|
Study of the influence of substrate temperature on structural, optical, and electrical properties of Zn-doped MnIn 2 S 4 thin films prepared by chemical spray pyrolysis
Physics Letters A,
2016
DOI:10.1016/j.physleta.2016.06.043
|
|
|