World Journal of Mechanics

World Journal of Mechanics

ISSN Print: 2160-049X
ISSN Online: 2160-0503
www.scirp.org/journal/wjm
E-mail: wjm@scirp.org
"Common Type of Damages in Composites and Their Inspections"
written by Amin Ghobadi,
published by World Journal of Mechanics, Vol.7 No.2, 2017
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Fibre volume fraction screening of pultruded carbon fibre reinforced polymer panels based on analysis of anisotropic ultrasonic sound velocity
Composites Part B: Engineering, 2023
[2] Fatigue driven delamination in composite structures: Definition and assessment of a novel fracture mechanics based computational tool
International Journal of Fatigue, 2023
[3] Environmental and Economic Assessment of Repairable Carbon-Fiber-Reinforced Polymers in Circular Economy Perspective
Materials, 2022
[4] High frequency eddy current inspection of fibre placement in Carbon Fibre Reinforced Polymer Composites
2022
[5] Adaptive optimisation of multi-aperture ultrasonic phased array imaging for increased inspection speeds of wind turbine blade composite panels
NDT & E …, 2022
[6] Mechanical and dynamic responses of unidirectional/woven carbon fiber reinforced thermoset and thermoplastic composites after low velocity impact
Polymers and …, 2022
[7] Effect of Milling Parameters on the Formation of Surface Defects in Polymer Composites
Materials Science, 2022
[8] Recycling Studies of Epoxy Fiber-Reinforced Composites
Handbook of Epoxy/Fiber Composites, 2022
[9] Energy Value Estimation of Acoustic Emission Signal Using Advanced Machine Learning Algorithms within Composite Specimen Application
… Conference on Electrical …, 2022
[10] Experimental and numerical investigation of moisture effects on bending behaviors and damage mechanisms of composite sandwich structures by acoustic emission …
2022
[11] Carbon Nanostructure Infused Fiber Composites for Damage Sensing
2022
[12] Low-Velocity Impact, Vibration and Shock Response of Unstitched/Stitched E-And S-Glass/Vinyl Ester Composites
2022
[13] Моделирование процесса сверления композиционного материала методом конечных элементов
Вестник Ульяновского государственного …, 2022
[14] Damage detection in anisotropic-laminated composite beams based on incomplete modal data and teaching–learning-based optimization
Structural and …, 2022
[15] The intersection of damage evaluation of fiber-reinforced composite materials with machine learning: A review
Journal of Composite Materials, 2022
[16] Vibration-based damage detection in anisotropic laminated composite beams by a shear-deformable finite element and harmony search optimization
Structural and Multidisciplinary Optimization, 2022
[17] Structural Health Monitoring Impact Classification Method Based on Bayesian Neural Network
Polymers, 2022
[18] Internal damage detection of composite structures using passive RFID tag antenna deformation method: Basic research
Sensors, 2021
[19] On the determination of acoustic emission wave propagation velocity in composite sandwich structures
2021
[20] Anticipation of damage presence in a fibre reinforced polymer plate through damping behaviour
2021
[21] Using vibroacoustic methods to describe the dynamic properties of composite elements to assess their technical condition
POJAZDY SZYNOWE, 2021
[22] Vibroacoustic analysis in the assessment of the technical condition of the aircraft airframe composite elements
2021
[23] Utjecaj zaključavanja uslijed pandemije bolesti COVID-19 na industriju kompozitnih materijala
2021
[24] Smart Maintenance
2021
[25] Multiple damage detection in laminated composite beams using automated model update
Structures, 2021
[26] Acousto-ultrasonic analysis of defects in composite specimens used in transportation domain
2021
[27] Nondestructive testing of composite T-Joints by TNDT and other methods
2021
[28] Peridynamic modeling of fire damage in composites
2020
[29] Experimental Investigation of the Effect of Internal Damage on Ballistic Resistance of Layered Composites
نشریه پژوهشی مهندسی مکانیک ایران, 2020
[30] Μαθηματική και υπολογιστική μοντελοποίηση συνθέτων υλικών και ανάπτυξη τεχνικών μη καταστροφικού ελέγχου
2020
[31] Electrically Conductive MXene-Coated Glass Fibers for Damage Monitoring in Fiber-Reinforced Composites
2020
[32] An Innovative Approach for Restoring the Mechanical Properties of Thermoplastic-Matrix Nanocomposite by the Use of Partially Polymerized Cyclic Butylene …
2020
[33] Investigation of damage detection methods for laminated composite materials using full field digital image correlation
2020
[34] بررسی تجربی تأثیر آسیب های داخلی بر روی مقاومت بالستیکی مواد مرکب لایه ای‎
Muhandisī-i mikānīk-i īrān. sīstimhā-yi dīnāmīkī va mikānīk-i jāmidāt, 2020
[35] Knowledge elicitation based on genetic programming for non destructive testing of critical aerospace systems
2020
[36] Study on the Growth and Properties of Electrolessly Deposited Thin Copper Coatings on Epoxy-Based CFRP
2020
[37] An initial acousto-ultrasonic experimental investigation of defects in composite specimens used in the transportation domain
2020
[38] Bearing strength and failure behavior of hybrid composite laminates.
2020
[39] Improvement in Accuracy of a Multi-Joint Robotic Ultrasonic Inspection System for the Integrity of Composite Structures
2020
[40] Kísérleti modális elemzés alkalmazása szálerősítéses kompozitok károsodásának vizsgálatához
2019
[41] Thermal characterization and comparison of different advanced composites for tooling applications
2019
[42] Modélisation en Volumes Finis de CND des Matériaux Faiblement Conducteurs par Courants de Foucault et de Déplacement.
2019
[43] Measurements for stress sensing of composites using tailored piezospectroscopic coatings
2019
[44] Deformation studies on steel-concrete composite T beam sections
2019
[45] The change of the NVH characteristics of composite vehicle components as a result of visible and not visible damages
2019
[46] Efficiency Estimation of Energy Introduction of a Ultrasound Field Into the Zone of Drilling of Complex Packages From Composite Materials and Titanium
2019
[47] Thin ply CFRP for cryogenic fuel tank applications
2019
[48] Successes and challenges in non-destructive testing of aircraft composite structures
2019
[49] Cohesive Zone Model for Fracture Characterisation in Composites
2019
[50] Uma metodologia para avaliação do comportamento mecânico de compósitos com microestrutura multifásica
2019
[51] Piezospectroscopic coatings: Effects of alumina nanoparticle volume fraction on stress-sensing.
2018
[52] Peridynamic Analysis of Marine Composites under Shock Loads by Considering Thermomechanical Coupling Effects
Journal of Marine Science and Engineering, 2018
[53] Experimental and numerical study of composite omega stringer–skin debonding under flexural loading conditions
Multiscale and Multidisciplinary Modeling, Experiments and Design, 2018
[54] NDT thermographic techniques on CFRP structural components for aeronautical application
Procedia Structural Integrity, 2018
[55] Evaluation of Electrical and Mechanical Properties of Carbon-Fiber Composites Using Interleaved Materials
2018
[56] Оптимизация технологических параметров сверления отверстий в пакетах из углепластиков и титановых сплавов
2018
[57] Teză de doctorat
2014
[58] Minderung physiologischer Reaktivität auf psychosozialen Stress durch Taiji-Training–wer profitiert besonders? Eine Untersuchung moderierender Effekte von …
Hafter… - Zeitschrift für …, 2012
[59] Raylı Sistem Araçlarında Kullanılan Kompozit Malzemelerin Termografik Muayene ile Kontrolü
[60] Free Vibration Analysis of Layered Composite Beams with Delamination Damage
[61] Учредители: Ульяновский государственный технический университет
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top