Fiber Line Optimization in Single Ply for 3D Printed Composites

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Open Journal of Composite Materials

ISSN Print: 2164-5612
ISSN Online: 2164-5655
www.scirp.org/journal/ojcm
E-mail: ojcm@scirp.org

Google-based Impact Factor: 1.5
Citations h5-index & Ranking*

Journals Menu

"Fiber Line Optimization in Single Ply for 3D Printed Composites"
written by Yusuke Yamanaka, Akira Todoroki, Masahito Ueda, Yoshiyasu Hirano, Ryosuke Matsuzaki,
published by Open Journal of Composite Materials, Vol.6 No.4, 2016

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour
	González, A Esnaola, U Morales… - Additive …, 2023

[2]	Load-Oriented Nonplanar Additive Manufacturing Method for Optimized Continuous Carbon Fiber Parts
	Materials, 2023

[3]	Experimental evaluation of variable thickness 3D printing of continuous carbon fiber-reinforced composites
	Composite Structures, 2022

[4]	Design and analysis of fiber placement for composite conical shell
	Journal of Mechanical Science and Technology, 2022

[5]	Non-Planar Slicing Method for Maximizing the Anisotropic Behavior of Continuous Fiber-Reinforced Fused Filament Fabricated Parts
	International …, 2022

[6]	Postprocessing and simulation methods for additively manufactured continuous fibre reinforced plastics
	2022

[7]	3D printed FDM composites: fabrication, microstructure and properties
	2022

[8]	CAD/CAM/CAE-система для изготовления конструкций из волокнистых композиционных материалов методом 3D-печати
	Труды МАИ, 2022

[9]	Pin‐bearing connection strength of single‐bolted pultruded glass fiber‐reinforced polymer profiles strengthened by glass fiber sheet
	Polymer Composites, 2022

[10]	A novel single-stroke path planning algorithm for 3D printers using continuous carbon fiber reinforced thermoplastics
	Additive …, 2022

[11]	Connection Confinement of Bolted Fibre-Reinforced Polymer Bamboo Composite
	Polymers, 2022

[12]	Filament path optimization of Fused Filament Fabricated parts incorporating the effect of pre-fusion densities
	International Journal of …, 2022

[13]	More Stiffness with Less Fiber: End-to-End Fiber Path Optimization for 3D-Printed Composites
	arXiv preprint arXiv …, 2022

[14]	Proper generalized decomposition solutions for composite laminates parametrized with fibre orientations
	Ghamrawy, S Zlotnik, F Auricchio, P Díez - Computational Mechanics, 2022

[15]	Fracture toughness characterization of 3D-printed advanced structured specimens by digital image correlation
	International Journal of Fracture, 2022

[16]	Effectiveness of fibre placement in 3D printed open-hole composites under uniaxial tension
	Composites Science and …, 2022

[17]	3d printing of continuous fiber reinforced polymer composites: Development, application, and prospective
	Chinese Journal of …, 2022

[18]	On the strengthening of pultruded GFRP connections using glass fiber sheets: A study on the influence of bolt diameter
	Applied Composite …, 2021

[19]	Review of mechanical properties of and optimisation methods for continuous fibre-reinforced thermoplastic parts manufactured by fused deposition modelling
	2021

[20]	Compressive strength degradation of the curved sections of 3D-printed continuous carbon fiber composite
	2021

[21]	Load path-guided fiber trajectory in composite panels: A comparative study and a novel combined method
	2021

[22]	Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook
	2021

[23]	Data-driven systems engineering for bioinspired integrative design
	2021

[24]	Additive manufacturing of continuous fiber reinforced polymer composites: Design opportunities and novel applications
	Composites Communications, 2021

[25]	Testing method for evaluating mechanical properties of 3d printed cfrp with curved fibers by four-point bending test of l-shaped specimen
	Composites Part C …, 2021

[26]	ЭФФЕКТИВНОСТЬ КОМПОЗИТОВ ПЕРЕМЕННОЙ ЖЕСТКОСТИ C КРИВОЛИНЕЙНЫМИ ВОЛОКНАМИ, НАХОДЯЩИХСЯ ПОД ДЕЙСТВИЕМ СДВИГОВОЙ …
	… конференция молодых ученых и студентов по …, 2021

[27]	低コスト CFRTP 開発のための炭素繊維の配置・配向の最適化
	日本複合材料学会誌, 2021

[28]	Optimization of curvilinear fiber orientation of composite plates and its experimental validation
	2021

[29]	Improving the shear strength of bolted connections in pultruded GFRP using glass fiber sheets
	2021

[30]	Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites
	2021

[31]	3D Compaction Printing of a Continuous Carbon Fiber Reinforced Thermoplastic
	2020

[32]	A review on machine learning in 3D printing: applications, potential, and challenges
	2020

[33]	3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber
	2020

[34]	Load path visualization and fiber trajectory optimization for additive manufacturing of composites
	2020

[35]	Design and 3D printing of continuous fiber reinforced heterogeneous composites
	2020

[36]	Minimization of maximum failure criterion of laminated composite shell structure by optimizing distributed-material orientation
	2020

[37]	Failure analysis of 3D printed woven composite plates with holes under tensile and shear loading
	2020

[38]	Progressive damage simulation for a 3D-printed curvilinear continuous carbon fiber-reinforced thermoplastic based on continuum damage mechanics
	2020

[39]	3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication—A Review
	2020

[40]	Optimal orientation of fibre composites for strength based on Hashin's criteria optimality conditions
	2020

[41]	3D and 4D printing of high performance continuous synthetic and natural fibre composites for structural and morphing applications
	2020

[42]	高強度 CFRP の 3D プリンティングにおけるプリントパスと形状設計
	2020

[43]	Haoqi Zhang, Andrew Dickson, Dongmin Yang
	2019

[44]	Material-orientation optimization for tailoring thermal deformation of laminated composite shell structures using a parameter-free approach
	2019

[45]	3D プリント炭素繊維強化プラスチックの湾曲部における繊維束の折り返し発生メカニズム
	2019

[46]	3D プリントした湾曲連続繊維複合材の曲げ破壊則
	2019

[47]	3D プリントによる曲線繊維配向を有する連続炭素繊維強化熱可塑性プラスチックの連続体損傷力学に基づく損傷進展シミュレーション
	2019

[48]	CFRP manufacturing method by using electro-activated deposition and the effect of reinforcement with carbon fiber circumferentially around the hole
	Composite Structures, 2019

[49]	炭素繊維を形状に沿って配向した部品の光造形
	2019

[50]	Construction of Smooth Biorthogonal Waves on Triangulated Spaces
	2019

[51]	Mechanism of folding a fiber bundle in the curved section of 3D printed carbon fiber reinforced plastics
	2019

[52]	Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications
	2019

[53]	力学的異方性を有する炭素繊維強化プラスチックの 3D プリンティング
	2019

[54]	Bending fracture rule for 3D-printed curved continuous-fiber composite
	2018

[55]	クラスタリングを用いた湾曲繊維 CFRP の最適繊維配向モデルの探索手法の提案
	2018

[56]	Performance-driven 3D printing of continuous curved fibre reinforced polymer composites a preliminary numerical study
	2018

[57]	An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding
	Mechanics of Advanced Materials and Structures, 2018

[58]	Effects of Set Curvature and Fiber Bundle Size on the Printed Radius of Curvature by a Continuous Carbon Fiber Composite 3D Printer
	Additive Manufacturing, 2018

[59]	Optimisation of Fibre-Paths in Composites Produced by Additive Manufacturing
	EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, 2018

[60]	АНАЛИЗ НАПРЯЖЁННО-ДЕФОРМИРОВАННОГО СОСТОЯНИЯ И ПРОГРЕССИВНОГО РАЗРУШЕНИЯ КОМПОЗИТНЫХ СТРУКТУР ПЕРЕМЕнной …
	2018

[61]	Fabrication and mechanical characterization of continuous carbon fiber-reinforced thermoplastic using a preform by three-dimensional printing and via hot-press …
	Advanced Composite Materials, 2018

[62]	Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study
	Composites Part B: Engineering, 2018

[63]	複合材料成形技術の最前線
	材料, 2018

[64]	ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ НАПРЯЖЁННО-ДЕФОРМИРОВАННОГО СОСТОЯНИЯ ТИПОВОЙ КОНСТРУКЦИИ МАЛЫХ КОСМИЧЕСКИХ АППАРАТОВ …
	2018

[65]	Optimization of varying orientation of continuous fiber direction and its applications to new methods of additive manufacturing
	2018

[66]	Resin molding by using electro-activated deposition for efficient manufacturing of carbon fiber reinforced plastic
	Composite Structures, 2017

[67]	3D プリンタによる連続炭素繊維強化プラスチックの積層造形と機械的特性評価
	日本複合材料学会誌, 2017

[68]	Optimization of Continuous Fiber Direction and its Applications using New Additive Manufacturing Methods
	2017

[69]	Приближенное решение уравнений теории упругости с помощью сплайн-вейвлетов


[70]	CAD/CAM/CAE system for manufacturing structures from fibrous composite materials using 3D-printing


[71]	Method for finding approximate solutions of elasticity equations using spline wavelets

[1]	Experimental and numerical optimization of variable stiffness tensile coupons with a hole for maximum stiffness Composite Structures, 2024 DOI:10.1016/j.compstruct.2023.117643

[2]	More Stiffness with Less Fiber: End-to-End Fiber Path Optimization for 3D-Printed Composites Proceedings of the 8th ACM Symposium on Computational Fabrication, 2023 DOI:10.1145/3623263.3623356

[3]	Strain- and stress-based parametric optimization of fiber-reinforced elastomers under finite deformations Mechanics of Materials, 2023 DOI:10.1016/j.mechmat.2023.104581

[4]	Simultaneous Optimization of Carbon Fiber Allocation and Orientation by IFM-GA Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2023 DOI:10.1016/j.cjmeam.2023.100078

[5]	The effects of glass fiber sheet lamination on the connection strength of single-bolted pultruded glass fiber reinforced polymer profiles Journal of Composite Materials, 2023 DOI:10.1177/00219983231184732

[6]	Optimization of Scheme Selection for 3D Printing of Functional Objects from Composite Materials Modelling and Data Analysis, 2023 DOI:10.17759/mda.2023130201

[7]	Layered fiber orientation optimization for continuous fiber reinforced polymer additive manufacturing using multi-material topology optimization Progress in Additive Manufacturing, 2023 DOI:10.1007/s40964-023-00434-7

[8]	Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour Additive Manufacturing, 2023 DOI:10.1016/j.addma.2023.103418

[9]	Proper generalized decomposition solutions for composite laminates parametrized with fibre orientations Computational Mechanics, 2023 DOI:10.1007/s00466-022-02218-2

[10]	Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour Additive Manufacturing, 2023 DOI:10.1016/j.addma.2023.103418

[11]	Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour Additive Manufacturing, 2023 DOI:10.1016/j.addma.2023.103418

[12]	Fracture toughness characterization of 3D-printed advanced structured specimens by digital image correlation International Journal of Fracture, 2023 DOI:10.1007/s10704-022-00672-w

[13]	Efficiency of variable stiffness composites with curvilinear fibers under shear loading PROCEEDINGS OF INTERNATIONAL CONFERENCE OF YOUNG SCIENTISTS AND STUDENTS “TOPICAL PROBLEMS OF MECHANICAL ENGINEERING” ToPME 2021: Mechanical Engineering Research Institute of the Russian Academy of Sciences (IMASH RAN), 2023 DOI:10.1063/5.0111917

[14]	Layered fiber orientation optimization for continuous fiber reinforced polymer additive manufacturing using multi-material topology optimization Progress in Additive Manufacturing, 2023 DOI:10.1007/s40964-023-00434-7

[15]	Experimental evaluation of variable thickness 3D printing of continuous carbon fiber-reinforced composites Composite Structures, 2022 DOI:10.1016/j.compstruct.2022.115391

[16]	Effectiveness of fibre placement in 3D printed open-hole composites under uniaxial tension Composites Science and Technology, 2022 DOI:10.1016/j.compscitech.2022.109269

[17]	Filament path optimization of Fused Filament Fabricated parts incorporating the effect of pre-fusion densities International Journal of Solids and Structures, 2022 DOI:10.1016/j.ijsolstr.2022.111916

[18]	A novel single-stroke path planning algorithm for 3D printers using continuous carbon fiber reinforced thermoplastics Additive Manufacturing, 2022 DOI:10.1016/j.addma.2022.102816

[19]	Filament path optimization of Fused Filament Fabricated parts incorporating the effect of pre-fusion densities International Journal of Solids and Structures, 2022 DOI:10.1016/j.ijsolstr.2022.111916

[20]	Effectiveness of fibre placement in 3D printed open-hole composites under uniaxial tension Composites Science and Technology, 2022 DOI:10.1016/j.compscitech.2022.109269

[21]	Design and analysis of fiber placement for composite conical shell Journal of Mechanical Science and Technology, 2022 DOI:10.1007/s12206-022-0230-7

[22]	On the Strengthening of Pultruded GFRP Connections Using Glass Fiber Sheets: A Study on the Influence of Bolt Diameter Applied Composite Materials, 2022 DOI:10.1007/s10443-021-09972-1

[23]	Connection Confinement of Bolted Fibre-Reinforced Polymer Bamboo Composite Polymers, 2022 DOI:10.3390/polym14102051

[24]	Proper generalized decomposition solutions for composite laminates parametrized with fibre orientations Computational Mechanics, 2022 DOI:10.1007/s00466-022-02218-2

[25]	Filament path optimization of Fused Filament Fabricated parts incorporating the effect of pre-fusion densities International Journal of Solids and Structures, 2022 DOI:10.1016/j.ijsolstr.2022.111916

[26]	Experimental evaluation of variable thickness 3D printing of continuous carbon fiber-reinforced composites Composite Structures, 2022 DOI:10.1016/j.compstruct.2022.115391

[27]	A novel single-stroke path planning algorithm for 3D printers using continuous carbon fiber reinforced thermoplastics Additive Manufacturing, 2022 DOI:10.1016/j.addma.2022.102816

[28]	Fracture toughness characterization of 3D-printed advanced structured specimens by digital image correlation International Journal of Fracture, 2022 DOI:10.1007/s10704-022-00672-w

[29]	Optimization of Carbon Fiber Allocation and Orientation to Develop Low-cost CFRTP Journal of the Japan Society for Composite Materials, 2021 DOI:10.6089/jscm.47.241

[30]	Improving the shear strength of bolted connections in pultruded GFRP using glass fiber sheets Composite Structures, 2021 DOI:10.1016/j.compstruct.2020.112896

[31]	Optimization of curvilinear fiber orientation of composite plates and its experimental validation Composite Structures, 2021 DOI:10.1016/j.compstruct.2020.112956

[32]	Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites Composites Science and Technology, 2021 DOI:10.1016/j.compscitech.2020.108502

[33]	Compressive strength degradation of the curved sections of 3D-printed continuous carbon fiber composite Composites Part A: Applied Science and Manufacturing, 2021 DOI:10.1016/j.compositesa.2020.106244

[34]	Testing method for evaluating mechanical properties of 3D printed CFRP with curved fibers by four-point bending test of L-shaped specimen Composites Part C: Open Access, 2021 DOI:10.1016/j.jcomc.2021.100187

[35]	Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook Composites Part B: Engineering, 2021 DOI:10.1016/j.compositesb.2021.109143

[36]	Review of mechanical properties of and optimisation methods for continuous fibre-reinforced thermoplastic parts manufactured by fused deposition modelling Progress in Additive Manufacturing, 2021 DOI:10.1007/s40964-021-00187-1

[37]	Additive manufacturing of continuous fiber reinforced polymer composites: Design opportunities and novel applications Composites Communications, 2021 DOI:10.1016/j.coco.2021.100907

[38]	Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook Composites Part B: Engineering, 2021 DOI:10.1016/j.compositesb.2021.109143

[39]	3D compaction printing of a continuous carbon fiber reinforced thermoplastic Composites Part A: Applied Science and Manufacturing, 2020 DOI:10.1016/j.compositesa.2020.105985

[40]	3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication—A Review Polymers, 2020 DOI:10.3390/polym12102188

[41]	Load path visualization and fiber trajectory optimization for additive manufacturing of composites Additive Manufacturing, 2020 DOI:10.1016/j.addma.2019.100942

[42]	3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber Composites Science and Technology, 2020 DOI:10.1016/j.compscitech.2019.107905

[43]	Design and 3D printing of continuous fiber reinforced heterogeneous composites Composite Structures, 2020 DOI:10.1016/j.compstruct.2020.111945

[44]	Failure analysis of 3D printed woven composite plates with holes under tensile and shear loading Composites Part B: Engineering, 2020 DOI:10.1016/j.compositesb.2020.107835

[45]	Optimal orientation of fibre composites for strength based on Hashin’s criteria optimality conditions Structural and Multidisciplinary Optimization, 2020 DOI:10.1007/s00158-019-02462-w

[46]	Minimization of maximum failure criterion of laminated composite shell structure by optimizing distributed-material orientation Structural and Multidisciplinary Optimization, 2020 DOI:10.1007/s00158-019-02435-z

[47]	3D compaction printing of a continuous carbon fiber reinforced thermoplastic Composites Part A: Applied Science and Manufacturing, 2020 DOI:10.1016/j.compositesa.2020.105985

[48]	A review on machine learning in 3D printing: applications, potential, and challenges Artificial Intelligence Review, 2020 DOI:10.1007/s10462-020-09876-9

[49]	Laser Stereolithography with Carbon Fiber Oriented along Shape of Part Journal of the Japan Society for Precision Engineering, 2019 DOI:10.2493/jjspe.85.202

[50]	Material-orientation optimization for tailoring thermal deformation of laminated composite shell structures using a parameter-free approach Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2019 DOI:10.1299/jamdsm.2019jamdsm0083

[51]	CFRP manufacturing method by using electro-activated deposition and the effect of reinforcement with carbon fiber circumferentially around the hole Composite Structures, 2019 DOI:10.1016/j.compstruct.2018.09.084

[52]	EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization 2019 DOI:10.1007/978-3-319-97773-7_94

[53]	Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications Additive Manufacturing, 2019 DOI:10.1016/j.addma.2019.01.005

[54]	Mechanism of folding a fiber bundle in the curved section of 3D printed carbon fiber reinforced plastics Advanced Composite Materials, 2019 DOI:10.1080/09243046.2019.1682794

[55]	Construction of Smooth Biorthogonal Waves on Triangulated Spaces 2019 International Russian Automation Conference (RusAutoCon), 2019 DOI:10.1109/RUSAUTOCON.2019.8867785

[56]	Cutting Edge of Molding Techniques of Composite Materials Journal of the Society of Materials Science, Japan, 2018 DOI:10.2472/jsms.67.888

[57]	An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding Mechanics of Advanced Materials and Structures, 2018 DOI:10.1080/15376494.2018.1516324

[58]	Bending fracture rule for 3D-printed curved continuous-fiber composite Advanced Composite Materials, 2018 DOI:10.1080/09243046.2018.1558327

[59]	Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study Composites Part B: Engineering, 2018 DOI:10.1016/j.compositesb.2018.06.017

[60]	Effects of Set Curvature and Fiber Bundle Size on the Printed Radius of Curvature by a Continuous Carbon Fiber Composite 3D Printer Additive Manufacturing, 2018 DOI:10.1016/j.addma.2018.09.019

[61]	Fabrication and mechanical characterization of continuous carbon fiber-reinforced thermoplastic using a preform by three-dimensional printing and via hot-press molding Advanced Composite Materials, 2017 DOI:10.1080/09243046.2017.1368840

[62]	Resin molding by using electro-activated deposition for efficient manufacturing of carbon fiber reinforced plastic Composite Structures, 2017 DOI:10.1016/j.compstruct.2017.09.064

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Open Journal of Composite Materials

Open Journal of Composite Materials

Journals Menu

Home

About SCIRP

Service

Policies