[1]
|
Evaluation of the Performance of PTFE-Composites as Antifriction Layers in Supporting Parts with a Spherical Segment
Journal of Friction and Wear,
2023
DOI:10.3103/S1068366623030029
|
|
|
[2]
|
Investigation on bond in post‐installed anchored bars and lap splices subjected to direct tension
Structural Concrete,
2023
DOI:10.1002/suco.202201102
|
|
|
[3]
|
Three‐dimensional testing of fasteners
Structural Concrete,
2022
DOI:10.1002/suco.202200387
|
|
|
[4]
|
Strengthening of beams or slabs using temperature induction
Structural Concrete,
2022
DOI:10.1002/suco.202100469
|
|
|
[5]
|
Evaluation of the Performance of Antifriction PTFE Composites at a Pressure Over 60 MPA. I. Comparison of Their Hardness and Deformation Properties Under Free and Constrained Compression
Mechanics of Composite Materials,
2022
DOI:10.1007/s11029-022-10058-7
|
|
|
[6]
|
Longitudinal shear transmission of anchor channels into concrete—An experimental approach
Structural Concrete,
2021
DOI:10.1002/suco.202000133
|
|
|
[7]
|
Variable, full‐scale tester for tunnel linings
Structural Concrete,
2021
DOI:10.1002/suco.202000806
|
|
|
[8]
|
Thick slab punching with symmetry reductions
Structural Concrete,
2020
DOI:10.1002/suco.201900480
|
|
|
[9]
|
Verstärken von Stahlbetontragwerken mit Temperaturinduktion
Beton- und Stahlbetonbau,
2020
DOI:10.1002/best.202000038
|
|
|
[10]
|
Longitudinal shear transmission of anchor channels into concrete—An experimental approach
Structural Concrete,
2020
DOI:10.1002/suco.202000133
|
|
|
[11]
|
Thick slab punching with symmetry reductions
Structural Concrete,
2020
DOI:10.1002/suco.201900480
|
|
|
[12]
|
Verstärken von Stahlbetontragwerken mit Temperaturinduktion
Beton- und Stahlbetonbau,
2020
DOI:10.1002/best.202000038
|
|
|
[13]
|
Downsizing weight while upsizing efficiency: An experimental approach to develop optimized ultra‐light UHPC hybrid beams
Structural Concrete,
2019
DOI:10.1002/suco.201900215
|
|
|
[14]
|
Experimental analysis of concrete elements under partial area strip loading
Civil Engineering Design,
2019
DOI:10.1002/cend.201900001
|
|
|
[15]
|
Experimental analysis of concrete elements under partial area strip loading
Civil Engineering Design,
2019
DOI:10.1002/cend.201900001
|
|
|
[16]
|
Downsizing weight while upsizing efficiency: An experimental approach to develop optimized ultra‐light UHPC hybrid beams
Structural Concrete,
2019
DOI:10.1002/suco.201900215
|
|
|
[17]
|
High Tech Concrete: Where Technology and Engineering Meet
2018
DOI:10.1007/978-3-319-59471-2_97
|
|
|
[18]
|
Experimente zur Teilflächenpressung mit vorwiegend ebener Lastausbreitung
Beton- und Stahlbetonbau,
2018
DOI:10.1002/best.201700081
|
|
|
[19]
|
Digitale Planung und geometrische Präzisionsfertigung für Durchstanzversuche
Bautechnik,
2018
DOI:10.1002/bate.201800028
|
|
|
[20]
|
Digitale Planung und geometrische Präzisionsfertigung für Durchstanzversuche
Bautechnik,
2018
DOI:10.1002/bate.201800028
|
|
|
[21]
|
Experimente zur Teilflächenpressung mit vorwiegend ebener Lastausbreitung
Beton- und Stahlbetonbau,
2018
DOI:10.1002/best.201700081
|
|
|
[22]
|
Durchstanzexperimente an Plattenvierteln
Beton- und Stahlbetonbau,
2017
DOI:10.1002/best.201600071
|
|
|
[23]
|
Durchstanzexperimente an Plattenvierteln
Beton- und Stahlbetonbau,
2017
DOI:10.1002/best.201600071
|
|
|