Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Effects of Additives on Some Selected Properties of Base Sand"
written by Saliu Ojo Seidu, Bolarinwa Johnson Kutelu,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] The Effects of Reinforcing Sand Mould with Coconut Pod Ashes on Mechanical and Microstructural Properties of Aluminium Alloy
Journal of Multidisciplinary …, 2022
[2] A review on the effects of ceramic sand particles on most casting defects
Assafa… - Journal of Ceramic …, 2022
[3] Optimizing Green Strength of Foundry Sand Using Natural Starch as Additive
2022
[4] Optimization of Aluminum Sand Casting process parameters on RSM and ANN methods
Journal of Engineering Research, 2021
[5] Investigating the shear and compressive behaviour of the pine wood ash casting sand
2021
[6] Investigating the effect of additives in molding sand on mechanical properties of casted ZAMAK-3 alloy
2021
[7] Technological Properties of Thermo-insulating Moulding Sands with Organic Binder
2020
[8] Parametric Optimization of Permeability of Green Sand Mould Using ANN and ANFIS Methods
2020
[9] Characterization of Southwestern Nigeria River Sand for foundry use
2020
[10] Effect of variation of different additives on some selected properties of silica sand mould for aluminium castings
2020
[11] Investigations on the suitability of banana peel powder as an alternative additive in synthetic green sand moulding system
2020
[12] Improvement in shear strength characteristics of desert sand using shredded plastic waste
2020
[13] Comparison Study on Four Types Mathematical Model for Sand-Casting Process
2020
[14] Performance Analysis of Cow Dung as an Eco-Friendly Binder and Additive Material for Sustainable Moulding and Casting
2019
[15] Experimental Study of Optimization of Dry Compressive Strength of Groundnut Shell Ash and Ant Hill Powder-Bonded Sand for Foundry Application
World Journal of Innovative Research, 2019
[16] A State-of-the-Art Review on Manufacturing and Additive Influences on Sand-Cast Components
2019
[17] Optimization of Moulding Composition for Quality Improvement of Sand Casting
2018
[18] Study of the Effect of Nano-silica Particles on Resin-Bonded Moulding Sand Properties and Quality of Casting
Silicon, 2018
[19] Experimental study of the feasibility of using groundnut shell ash and ant hill powder in foundry application
Journal of the Chinese Advanced Materials Society, 2018
[20] Investigation on Influence of Naturally Available Additives on Green Sand Mould Properties-A Case Study
2017
[21] Effect of Different Additives on Some Selected Properties of Green Sand Mould
2017
[22] Desenvolvimento de procedimento para otimizar o processo de moldação em areia verde
2017
[23] A REVIEW ON SAND CASTING PROCESS
2016
[24] INVESTIGATION OF THE SUITABILITY OF IYOLOKO CLAY AS A BINDING MATERIAL FOR FOUNDRY APPLICATION
International Journal of Capacity Building in Education and Management (IJCBEM), 2016
[25] Novas formulações de areias de macho para processo Hot Box
2016
[26] Effect of Wood Flours on Moulding Sand Properties
2016
[27] Freitas
2016
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top