Modeling and Numerical Simulation of Material Science

Modeling and Numerical Simulation of Material Science

ISSN Print: 2164-5345
ISSN Online: 2164-5353
www.scirp.org/journal/mnsms
E-mail: mnsms@scirp.org
"Micromechanical Analysis of Thermal Expansion Coefficients"
written by Christian Karch,
published by Modeling and Numerical Simulation of Material Science, Vol.4 No.3, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Thermal-damage suppression of composite material by anti-lightning NCF/CIPCF film
Composites Science and Technology, 2022
[2] Multi-scale modelling and simulation of effective properties of perforated sheets with periodic patterns
Meccanica, 2022
[3] Modelling negative thermomechanical effects in reinforced road structures with thermoelastic incompatibility of coating and reinforcement materials
System research and …, 2022
[4] Influence of Temperature-Dependent Resin Behavior on Numerical Prediction of Effective CTEs of 3D Woven Composites
Proceedings of the 36th ASC …, 2021
[5] Micromechanical Modeling and Evaluation of Process-Induced Residual Stresses in 3D Woven Composites
2021
[6] Multiscale thermoviscoelastic modeling of composite materials
2021
[7] Evaluation and Comparison of Coefficient of Thermal Expansion of Esthetic Restorative Materials
Importance of COVID …, 2021
[8] Characterization of Hybrid Composites with Polyester Waste Fibers, Olive Root Fibers and Coir Pith Micro-Particles Using Mixture Design Analysis for Structural …
Polymers, 2021
[9] Practical Approbation of Thermodynamic Criteria for the Consolidation of Bimetallic and Functionally Gradient Materials
Metals, 2021
[10] A Comprehensive Approach to Modeling Freezing in Mechanical Bearings Considering Bridge Thermal Effects
2021
[11] Image-based numerical modeling for the effective thermo-elastic property of 4D carbon/carbon composite at high temperatures
2021
[12] Effective stiffness and thermal expansion of three-phase multifunctional polymer electrolyte coated carbon fibre composite materials
2021
[13] An efficient multi-scale computation of the macroscopic coefficient of thermal expansion: Application to the Resin Transfer Molding manufactured 3D woven …
2021
[14] Modeling of functionally graded materials to estimate effective thermo-mechanical properties
2021
[15] Comportement thermomécanique des matériaux fragiles microfissurés avec prise en compte des effets unilatéraux: approches théoriques et numériques
2020
[16] The Effect of Titanium Oxide Additions on the Phase Chemistry and Properties of Chromite-Magnesia Refractories
2020
[17] Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals
2020
[18] Analysis of coefficient of thermal expansion in carbon black filled PDMS composite
2020
[19] Experimental And Numerical Characterization Of PCB-Embedded Power Dies Using Solderless Pressed Metal Foam
2020
[20] An analytical approach to determine coefficients of thermal expansion of CNT/polymer nanocomposites
2020
[21] Tailoring Thermal Expansion in Additively Manufactured Titanium Alloys to Enable Functional Grading
2020
[22] Thermomechanical behaviour of multi-cracked brittle media taking into account unilateral effects: theoretical and numerical approaches
2020
[23] Caracterización térmica y mecánica de materiales compuestos de matriz epóxica reforzados con partículas cerámicas termomióticas
2020
[24] Sur un estimateur micromécanique de type Eshelby général et explicite pour l'élasticité, la thermique et la thermoélasticité: application aux inclusions multicouches
2020
[25] Matériaux composites Argent/Carbone à propriétés thermiques adaptatives
2019
[26] Prediction of Thermal Expansion Coefficients using the Second Phase Fraction and Void of Al-AlN Composites Manufactured by Gas Reaction Method
2019
[27] Determination of the effective thermoelastic properties of cork-based agglomerates
2019
[28] Multiscale modeling of short fibre reinforced composites and it's relationship to modal analysis of machinery parts
2019
[29] Constitutive modeling for time-and temperature-dependent behavior of composites
2019
[30] TEMPERATURE DEPENDENT DIMENSIONAL CHANGES OF COMPOSITES WITH LOW FILLER CONTENT
JKCD, 2019
[31] Theoretical prediction for thermal expansion coefficients of unidirectional fiber‐reinforced composites with variable elliptical cross‐sections
2019
[32] Micromechanical RVE model application for generalization of smart composite laminate structures with thermoelastic characteristics
Materials Research Express, 2018
[33] Micromechanics based multi-level model for predicting the coefficients of thermal expansion of hybrid fiber reinforced concrete
Construction and Building Materials, 2018
[34] Modelling mechanical lightning loads in carbon fibre-reinforced polymers
2018
[35] 열 효과 및 초음속 흐름을 고려한 압전 적층복합재료에 미소기계적 물성 응용
2018
[36] Fast and accurate two-field reduced basis approximation for parametrized thermoelasticity problems
Finite Elements in Analysis and Design, 2018
[37] Anisotropy of thermal expansion of 3Y-TZP, α-Al2O3 and composites from 3Y-TZP/α-Al2O3 system
Archives of Civil and Mechanical Engineering, 2018
[38] An efficient analytical homogenization technique for mechanical-hygrothermal responses of unidirectional composites with applications to optimization and multiscale analyses
Chinese Journal of Aeronautics, 2018
[39] A Review on Thermomechanical Properties of Polymers and Fibers Reinforced Polymer Composites
Journal of Industrial and Engineering Chemistry, 2018
[40] H-atmospheres of Icy Super-Earths Formed In Situ in the Outer Solar System: An Application to a Possible Planet Nine
The Astrophysical Journal, 2017
[41] Thermo-chemo-mechanical Effective Properties for Homogeneous and Heterogeneous n-Phase Mixtures with Application to Curing
Procedia CIRP, 2017
[42] Multiphysics and Multiscale Simulation for the Design of Microstructured Materials and Miniaturized Active Devices
2017
[43] Functional Polymer Composite Encapsulants for Electronic Packaging
2017
[44] (n)- AND (n + 1)-LAYERED COMPOSITE SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES
2017
[45] Numerical determination of elastic and viscoelastic properties of aligned continuous and discontinuous fiber reinforced composites.
2016
[46] Thermomechanical response of metal-ceramic graded composites for high-temperature aerospace applications
ProQuest Dissertations Publishing, 2016
[47] Fast and certified two-field reduced basis approximation for parametrized coupled thermoelasticity problems: computation of the effective coefficient of thermal expansion for heterogeneous composites
2016
[48] Microencapsulated phase change composite materials for energy efficient buildings
2016
[49] Coefficient of thermal expansion of particulate composites with ceramic inclusions
Ceramics International, 2016
[50] Residual Stresses and Oxidation of Silicon Carbide Fiber Reinforced Silicon Carbide Composites
2016
[51] Lightning Protection of Carbon Fibre Reinforced Plastics–An Overview–
2016
[52] A three-scale framework for fibre-reinforced-polymer curing Part I: Microscopic modeling and mesoscopic effective properties
International Journal of Solids and Structures, 2016
[53] Thermomechanical properties of zirconium tungstate/hydrogenated nitrile butadiene rubber (HNBR) composites for low-temperature applications
Journal of Materials Science, 2016
[54] Lightning protection of carbon fibre reinforced plastics—An overview
2016
[55] Micromechanical finite element predictions of a reduced coefficient of thermal expansion for 3D periodic architectured interpenetrating phase composites
Composite Structures, 2015
[56] MODIFISERT PAKNING FOR ARKTISKE BETINGELSER
2015
[57] Calculation of Effective Coefficient of Thermal Expansion for Composite'Glass-Eucryptite'Changing During Sintering.
Applied Mechanics & Materials, 2015
[58] Untersuchungen zum diodenlaserbasierten in-situ Tapelegen als Produktionstechnologie für einen großserienfähigen hybriden Leichtbau
[59] Fast and certified two-field reduced basis approximation for parametrized coupled thermoelasticity problems: computation of the effective coefficient of …
KC Hoang
[60] Graphene-Magnesium Core-Shell Nanocomposites: Physical, Mechanical, Thermal, and Electrical Properties
[61] Customized ceramic granules for laser powder bed fusion of aluminum oxide
[62] Towards Crack-Free Laser Manufactured Oxide Ceramic Parts by In-Situ Synthesis of Negative-Thermal-Expansion Phases
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top