Design Procedure and Simulation of a Novel Multi-Modal Tactile Display Device for Biomedical Applications

Journals Menu

Follow SCIRP

ISSN Print: 2161-122X
ISSN Online: 2161-1238
www.scirp.org/journal/jst
E-mail: jst@scirp.org

"Design Procedure and Simulation of a Novel Multi-Modal Tactile Display Device for Biomedical Applications"
written by Nader A. Mansour, Ahmed M. R. Fath El-Bab, Mohamed Abdellatif,
published by Journal of Sensor Technology, Vol.4 No.1, 2014

has been cited by the following article(s):

[1]	Fuzzy logic-based PI controller design and implementation of shape memory alloy actuator
	International Journal of Automation and Control, 2018

[2]	Development of a tactile display with 5 mm resolution using an array of magnetorheological fluid
	2017

[3]	Hybrid sliding mode fuzzy logic-based PI controller design and implementation of shape memory alloy actuator
	2016

[4]	Materiały SMA jako elementy napędowe w mechatronice–stan aktualny i prognoza dalszych prac
	2016

[5]	磁気粘性流体を微小領域に封入した触覚ディスプレイ
	2015

[6]	Design, characterization and control of SMA springs-based multi-modal tactile display device for biomedical applications
	Mechatronics, 2015

[7]	Comportamento termomecânico de minimolas superelásticas de NiTi: Influência de tratamentos térmicos.
	2014

[1]	Development of a tactile display with 5 mm resolution using an array of magnetorheological fluid Japanese Journal of Applied Physics, 2017 DOI:10.7567/JJAP.56.06GN19

[2]	Hybrid sliding mode fuzzy logic-based PI controller design and implementation of shape memory alloy actuator 2016 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT), 2016 DOI:10.1109/ICUMT.2016.7765225

[3]	Design, characterization and control of SMA springs-based multi-modal tactile display device for biomedical applications Mechatronics, 2015 DOI:10.1016/j.mechatronics.2015.08.004

Follow SCIRP

Free SCIRP Newsletters

Add your e-mail address to receive free newsletters from SCIRP.

Top