has been cited by the following article(s):
[1]
|
Phase Formation and Physical and Mechanical Properties of Fe‒Cu–Ni‒Sn–VN Composites Sintered by Vacuum Hot Pressing for the Diamond Stone Processing …
|
|
Journal of Superhard …,
2022 |
|
|
[2]
|
THE EFFECT OF PARTICLE SIZE AND MORPHOLOGY ON THE SINTER ABILITY OF Fe-Cu-Sn-Ni COMPOSITES MADE BY POWDER METALURGY
|
|
2021 |
|
|
[3]
|
Features of the Sintering of Fe–Cu–Sn–Ni and Cu–Ti–Sn–Ni Powders during Hot Pressing
|
|
Powder Metallurgy and …,
2021 |
|
|
[4]
|
Solutions of Critical Raw Materials Issues Regarding Iron-Based Alloys
|
|
2021 |
|
|
[5]
|
Design and application of a novel water-atomized pre-alloyed powder for diamond wire saw
|
|
2021 |
|
|
[6]
|
Preparation and properties of Al2O3-reinforced Cu-Ni-Sn metallic matrix for applications in diamond-cutting tools
|
|
2020 |
|
|
[7]
|
Novel approaches in manufacturing of multicomponent metallic binders for diamond cutting tools
|
|
2020 |
|
|
[8]
|
Spieki na bazie żelaza stosowane na osnowę w narzędziowych kompozytach metaliczno-diamentowych (Sintered iron-based materials used for the matrix in …
|
|
Jamrozek,
2020 |
|
|
[9]
|
微波强化烧结制备铁钴基金刚石锯片刀头
|
|
2018 |
|
|
[10]
|
Processing and Characterization of Fe-Mn-Cu-Sn-C Alloys Prepared by Ball Milling and Spark Plasma Sintering
|
|
Journal of Materials Engineering and Performance,
2018 |
|
|
[11]
|
金刚石排列模式对钻进时效的影响
|
|
科技导报,
2015 |
|
|
[12]
|
Single segment tests for the analysis of the core drilling process of concrete materials
|
|
International Conference on Stone and Concrete Machining (ICSCM),
2015 |
|
|
[13]
|
Sintered Fe-Ni-Cu-Sn-C Alloys Made of Ball-Milled Powders
|
|
Archives of Metallurgy and Materials,
2014 |
|
|
[14]
|
Badania spiekanych materia?ów Fe-Ni-C z dodatkiem 8% br?zu wykonanych z mielonych proszków
|
|
Rudy i Metale Nie?elazne ,
2014 |
|
|
[15]
|
Ball-milled Fe-Ni and Fe-Mn Matrix Powders For Sintered Diamond Tools
|
|
Archives of Metallurgy and Materials,
2014 |
|
|
[16]
|
Net shape forming of green alumina via CNC machining using diamond embedded tool
|
|
Ceramics International,
2013 |
|
|
[17]
|
Sintered diamond tools: trends, challenges and prospects
|
|
Powder Metallurgy,
2013 |
|
|
[18]
|
New Fe-Ni and Fe-Mn Powders Used in Manufacturing Diamond Tools
|
|
Applied Mechanics and Materials,
2013 |
|
|
[1]
|
Solutions of Critical Raw Materials Issues Regarding Iron-Based Alloys
Materials,
2021
DOI:10.3390/ma14040899
|
|
|
[2]
|
Features of the Sintering of Fe–Cu–Sn–Ni and Cu–Ti–Sn–Ni Powders during Hot Pressing
Powder Metallurgy and Metal Ceramics,
2021
DOI:10.1007/s11106-021-00250-0
|
|
|
[3]
|
Net shape forming of green alumina via CNC machining using diamond embedded tool
Ceramics International,
2013
DOI:10.1016/j.ceramint.2013.04.099
|
|
|
[4]
|
New Fe-Ni and Fe-Mn Powders Used in Manufacturing Diamond Tools
Applied Mechanics and Materials,
2013
DOI:10.4028/www.scientific.net/AMM.431.3
|
|
|