"Processed Low NOx Fly Ash as a Filler in Plastics"
written by X. Huang, J.Y. Hwang, J.M. Gillis,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, 2003
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Development of a lightweight BMC material using fly ash
Advanced Composite Materials, 2016
[2] General model for comparative tensile mechanical properties of composites fabricated from fly ash and virgin/recycled high‐density polyethylene
2016
[3] Property evaluation of nanostructured fly ash-reinforced acrylonitrile butadiene styrene nanocomposites
2016
[4] Upgrading of Cenospheres in Fly ash using a Series of Inverted Reflux Classifiers
2015
[5] Multistage Concentration of Cenospheres in Fly Ash Using the Inverted Reflux Classifier
2015
[6] Evaluation of properties of industrial waste filled polymer composites for automobile applications
Materials Science and Technology, 2015
[7] Effect of particle size of fly ash cenospheres on the properties of acrylonitrile butadiene styrene-filled composites
Journal of Thermoplastic Composite Materials, 2014
[8] Management of coal combustion wastes
2014
[9] Surface characterization of modified fly ash for polymer filler applications: A case study with polypropylene
Materials Express, 2014
[10] UJI KARAKTERISASI TARIK DAN TERMAL PLASTIK HDPE DENGAN FILLER ABU LAYANG DAN SILANE
2013
[11] Upgrading of positively buoyant particles using an inverted reflux classifier
2013
[12] USE OF VOLCANIC ASH AS AN ALTERNATIVE FILLER MATERIAL IN PPS COMPOSITES FOR THERMAL AND VISCOELASTIC PROPERTIES
?oban, Onur, Mustafa ?zgür Bora, Egemen Avcu, Sinan Fidan, Tamer S?nmaz?elik, and Orkun Ersoy, 2012
[13] Preparation and Characterization of CaSiO3/Natural Rubber Composite
Advanced Materials Research, 2012
[14] Relative melt viscosity, mechanical and electrical properties of polymer composites of HDPE/fly ash.
2012
[15] Use of Electric Power Generation By-Products in Wallboard, Cement and Plastics
Plantz, Philip E, 2012
[16] Research of Preparation and Characterization of PP/EPDM/CaS Composites
Applied Mechanics and Materials, 2011
[17] Effects of mica and fly ash concentration on the properties of polyester thermoplastic elastomer composites
Journal of Thermoplastic Composite Materials, 2011
[18] Effective thermal conductivity and coefficient of linear thermal expansion of high-density polyethylene—fly ash composites
Indian Journal of Physics, 2011
[19] Novel observations on kinetics of nonisothermal crystallization in fly ash filled isotactic‐polypropylene composites
Journal of applied polymer science, 2010
[20] Characterization of highly filled wood flour–polyvinyl chloride composites: Dynamic mechanical and dielectric analysis
Polymer Engineering & Science, 2010
[21] Nghiên cứu khả năng chảy nhớt, tính chất cơ lý và tính chất điện của vật liệu compozit HDPE/tro bay
2010
[22] Structure–property interface correlation of fly ash–isotactic polypropylene composites
Journal of materials science, 2009
[23] Characterization of highly filled wood flour–PVC composites: Morphological and thermal studies
Journal of applied polymer science, 2009
[24] Effect of particle size and concentration of flyash on properties of polyester thermoplastic elastomer composites
Journal of Minerals and Materials Characterization and Engineering, 2009
[25] Isothermal crystallization kinetics of fly ash filled iso-polypropylene composite-and a new physical approach
Journal of thermal analysis and calorimetry, 2009
[26] Photoluminescence of solution processed poly n-vinyl carbazole films (p 1-9) PS Chung, PH Holloway Published Online: May 27 2009 12: 55PM. DOI: 10.1002/app. 30542
Journal of Applied Polymer Science, 2009
[27] Thermal and rheological behavior of ultrafine fly ash filled LDPE composites
Journal of applied polymer science, 2008
[28] Limitations of Combustion Ashes:'From Threat to Profit'
2008
[29] Influence of reactivity of fly ash on geopolymerisation
Advances in applied ceramics, 2007
[30] Novel geopolymeric building materials through synergistic utilisation of industrial waste
2007
[31] Coal fly ash: from waste to industrial product
Particle & Particle Systems Characterization, 2007
[32] Towards sustainable solutions for fly ash through mechanical activation
Resources, Conservation and Recycling, 2007
[33] Mechanical and morphological properties of recycled high‐density polyethylene, filled with calcium carbonate and fly ash
Journal of applied polymer science, 2006