Author(s)

Jwngsar Brahma, Anirbid Sircar

Pandit Deendayal Petroleum University, Gandhinagar Raisan Village, Raisan, India.

The velocity anisotropy parameters and elastic constants play a very important role to estimate Young’s modulus and Poisson’s ratios accurately. For geomechanics applications such as hydraulic fracturing design, analysis of wellbore stability and rock failure, determination of in situ stress and assessment of the response of reservoirs and surrounding rocks to changes in pore pressure and stress, Young’s modulus and Poisson’s ratios play a very important role. Four rock samples were collected from four different wells situated in study area. The ultrasonic transmission method has been used to measure P-wave, Sh-wave and Sv-wave travel times as a function of orientation and confining pressure. The five independent stiffnesses constants, Young’s moduli, Poisson’s ratios and Bulk moduli of the samples were estimated. The Poisson’s ratios ( and ) are varying as the confining pressure is changed. The axial strain is larger than the lateral strain, resulting . For shales, the Young’s modulus measured parallel to bedding E₁ is usually greater than the Young’s modulus measured perpendicular to bedding E₃. Through this study it has been observed that, there is a strong effect of anisotropy parameters on Young’s modulus and Poisson’s ratio.

Elastic Stiffness; Shales; Sandstone; Sedimentary Rock; Anisotropy

Brahma, J. and Sircar, A. (2014) Estimation of the Effect of Anisotropy on Young’s Moduli and Poisson’s Ratios of Sedimentary Rocks Using Core Samples in Western and Central Part of Tripura, India. International Journal of Geosciences, 5, 184-195. doi: 10.4236/ijg.2014.52020.