Dr. Cheng Lu
School of Mechanical, Materials and
Mechatronic Engineering
University of
Wollongong
Wollongong, Australia
Associate
Professor
Email: chenglu@uow.edu.au
Qualifications
1999, Ph.D.,
Northeastern University, China
1993, B. E., Northeastern University, China
Research Fields
Computational
Material Science
Material
Processing Technology
Fracture
modelling and control
Publications (selected)
-
PEI, L., LU, C., ZHAO, X., ZHANG,
L., CHENG, K., MICHAL, G. & TIEU, K. 2015. Brittle versus ductile behaviour
of nanotwinned copper: A molecular dynamics study. Acta Materialia, 89, 1-13. ISSN 13596454. Available from:
http://dx.doi.org/10.1016/j.actamat.2015.01.054
-
ZHANG, L., LU, C., TIEU, K., ZHAO, X. & PEI, L. 2015. The
shear response of copper bicrystals with Σ11 symmetric and asymmetric tilt
grain boundaries by molecular dynamics simulation. Nanoscale, 7, 7224-7233. ISSN 20403364. Available from: http://dx.doi.org/
10.1039/c4nr07496c
-
ELSHAHOMI, A., LU, C., MICHAL, G., LIU, X., GODBOLE, A. &
VENTON, P. 2015. Decompression wave speed in CO2 mixtures: CFD modelling with
the GERG-2008 equation of state. Applied
Energy, 140, 20-32. ISSN 03062619. Available from:
http://dx.doi.org/10.1016/j.apenergy.2014.11.054
-
YU, H., TIEU, A. K., LU, C., LIU,
X., LIU, M., GODBOLE, A., KONG, C. & QIN, Q. 2015. A new insight into
ductile fracture of ultrafine-grained Al-Mg alloys. Scientific Reports, 5 (9568), 1-9. ISSN 20452322.
Available from: http://dx.doi.org/10.1038/srep09568
-
LIU, M., LU, C. & TIEU, A. K. 2015. Crystal plasticity
finite element method modelling of indentation size effect. International Journal of Solids and
Structures, 54, 42-49. ISSN 00207683.
Available from: http://dx.doi.org/10.1016/j.ijsolstr.2014.11.008
-
ZHANG, L., LU, C. & TIEU, K.
2014. Atomistic simulation of tensile deformation behavior of Σ5 tilt grain
boundaries in copper bicrystal. Scientific
Reports, 4 (5919), 1-9. ISSN 20452322. Available from:
http://dx.doi.org/10.1038/srep05919
-
SU, L., LU, C., LI, H., DENG, G.
& TIEU, K. 2014. Investigation of ultrafine grained AA1050 fabricated by
accumulative roll bonding. Materials
Science and Engineering A, 614, 148-155. ISSN 09215093. Available from:
http://dx.doi.org/10.1016/j.msea.2014.07.032
-
YU, H., TIEU, A. K., LU, C. & KONG, C. 2014. Abnormally
high residual dislocation density in pure aluminum after Al/Ti/Al laminate
annealing for seven days. Philosophical
Magazine Letters, 94, 732-740. ISSN 09500839.
Available from: http://dx.doi.org/10.1080/09500839.2014.971902
-
LIU, X., GODBOLE, A., LU, C., MICHAL, G. & VENTON, P.
2014. Source strength and dispersion of CO2 releases from high-pressure
pipelines: CFD model using real gas equation of state. Applied Energy, 126, 56-68. ISSN 03062619. Available from:
http://dx.doi.org/10.1016/j.apenergy.2014.03.073
-
SU, L., LU, C., TIEU, A. K., DENG,
G. & SUN, X. 2013. Ultrafine grained AA1050/AA6061 composite produced by
accumulative roll bonding. Materials
Science and Engineering A, 559, 345-351. ISSN
09215093. Available from: http://dx.doi.org/10.1016/j.msea.2012.08.109
-
YU, H., LU, C., TIEU, A. K., GODBOLE, A., SU, L., SUN, Y.,
LIU, M., TANG, D. & KONG, C. 2013. Fabrication of ultra-thin nanostructured
bimetallic foils by Accumulative Roll Bonding and Asymmetric Rolling. Scientific Reports, 3. ISSN 09215093. Available from:
http://dx.doi.org/10.1016/j.msea.2012.08.109
-
YU, H., LU, C., TIEU, K., LIU, X., SUN, Y., YU, Q. &
KONG, C. 2012. Asymmetric cryorolling for fabrication of nanostructural
aluminum sheets. Scientific Reports, 2 (772),
1-5. ISSN 20452322.
Available from: http://dx.doi.org/10.1038/srep00772
-
SU, L. H., LU, C., HE, L. Z.,
ZHANG, L. C., GUAGLIARDO, P., TIEU, A. K., SAMARIN, S. N., WILLIAMS, J. F.
& LI, H. J. 2012. Study of vacancy-type defects by positron annihilation in
ultrafine-grained aluminum severely deformed at room and cryogenic
temperatures. Acta Materialia, 60, 4218-4228. ISSN 13596454. Available from:
http://dx.doi.org/10.1016/j.actamat.2012.04.003
-
SU, L. H., LU, C., TIEU, A. K., HE, L. Z., ZHANG, Y. &
WEXLER, D. 2011. Vacancy-assisted hardening in nanostructured metals. Materials Letters, 65, 514-516. ISSN 0167577X. Available from:
http://dx.doi.org/10.1016/j.matlet.2010.10.090
-
LU, C., DENG, G. Y., TIEU, A. K., SU, L. H., ZHU, H. T. &
LIU, X. H. 2011. Crystal plasticity modeling of texture evolution and
heterogeneity in equal channel angular pressing of aluminum single crystal. Acta Materialia, 59, 3581-3592. ISSN
13596454. Available from: http://dx.doi.org/10.1016/j.actamat.2011.02.031
-
LU, C.,
GAO, Y., DENG, G. Y., MICHAL, G., HUYNH, N. N., LIU, X. H. & TIEU, A. K.
2009. Atomic-scale anisotropy of nanoscratch behavior of single crystal iron. Wear, 267, 1961-1966. ISSN
00431648. Available from: http://dx.doi.org/10.1016/j.wear.2009.05.006
-
LU, C.,
TIEU, K. & WEXLER, D. 2009. Significant enhancement of bond strength in the
accumulative roll bonding process using nano-sized SiO2 particles. Journal of Materials Processing Technology, 209, 4830-4834. ISSN 09240136. Available from:
http://dx.doi.org/10.1016/j.jmatprotec.2009.01.003
-
MICHAL, G.,
LU, C. & KIET TIEU, A. 2008. System modelling of a lateral force
microscope. Nanotechnology, 19 (455707), 1-10. ISSN 09574484. Available from:
http://dx.doi.org/10.1088/0957-4484/19/45/455707
Profile Details
https://ris.uow.edu.au/ris_public/WebObjects/RISPublic.woa/wa/Staff/selectPerson?id=8608&group=35
Last Updated: 2015-06-09