Department of Mechanical Engineering, College of Industrial Technology, Amagasaki, Japan - Articles

A Numerical Study on Jet Structure and Noise Emission of Underexpanded Radial Jet (Articles)

Takumi Nojima, Yoko Sakakibara, Masaki Endo, Hiromasa Suzuki

Open Journal of Fluid Dynamics Vol.9 No.1, March 14, 2019

DOI: 10.4236/ojfd.2019.91006 920 Downloads 1,921 Views Citations
Design and Comparison of Genetic Algorithms for Mixed-Model Assembly Line Balancing Problem with Original Task Times of Models (Articles)

Panneerselvam Sivasankaran, Peer Mohamed Shahabudeen

American Journal of Industrial and Business Management Vol.6 No.5, May 31, 2016

DOI: 10.4236/ajibm.2016.65063 2,380 Downloads 4,344 Views Citations
A Survey on Effect of Agro Waste Ash as Reinforcement on Aluminium Base Metal Matrix Composites (Articles)

Prasanna P. Kulkarni, B. Siddeswarappa, Kariyappla Shivashankar Hemanth Kumar

Open Journal of Composite Materials Vol.9 No.3, July 31, 2019

DOI: 10.4236/ojcm.2019.93019 2,196 Downloads 5,006 Views Citations
Unsteady Behavior of Necklace Vortex Produced by a Square Plate Protrusion (Articles)

Keita Toda, Tsukasa Haraoka, Teruyoshi Sadahiro, Hidemi Yamada

Open Journal of Fluid Dynamics Vol.8 No.1, March 29, 2018

DOI: 10.4236/ojfd.2018.81005 1,065 Downloads 2,254 Views Citations
Taguchi Technique for the Simultaneous Optimization of Tribological Parameters in Metal Matrix Composite (Articles)

Kumar.T.R. Hemanth, R.P. Swamy, T.K. Chandrashekar

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.12, October 10, 2011

DOI: 10.4236/jmmce.2011.1012090 6,511 Downloads 9,231 Views Citations
The Relation between the Coefficient of Friction and Pressure Drop by Using the Different Reynolds Number in a Circular Tube (Articles)

Abdulmagid A. Khattabi, Ahmed A. Hablous, Mofied M. Elnemry

Open Journal of Fluid Dynamics Vol.5 No.2, June 2, 2015

DOI: 10.4236/ojfd.2015.52012 7,765 Downloads 10,894 Views Citations
Fabrication and Characterizations of Mechanical Properties of Al-4.5%Cu/10TiC Composite by In-situ Method (Articles)

Anand Kumar, Manas Mohan Mahapatra, Pradeep Kumar Jha

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.11, November 30, 2012

DOI: 10.4236/jmmce.2012.1111113 7,591 Downloads 11,174 Views Citations
Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite (Articles)

Belete Sirahbizu Yigezu, Manas Mohan Mahapatra, Pradeep Kumar Jha

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.4, July 4, 2013

DOI: 10.4236/jmmce.2013.14022 8,011 Downloads 13,315 Views Citations
Study on Fatigue Lifetimes and Their Variation of Mg Alloy AZ61 at Various Stress Ratios (Articles)

Kenichi Masuda, Sotomi Ishihara, Minoru Ishiguro, Hiroshi Shibata

Materials Sciences and Applications Vol.9 No.13, December 3, 2018

DOI: 10.4236/msa.2018.913072 1,159 Downloads 2,582 Views Citations
Improvement in Surface Roughness and Hardness for Carbon Steel by Slide Burnishing Process (Articles)

Hirotaka Kato, Wataru Hirokawa, Yoshikazu Todaka, Kazufumi Yasunaga

Materials Sciences and Applications Vol.12 No.5, May 8, 2021

DOI: 10.4236/msa.2021.125011 1,436 Downloads 3,879 Views Citations
This article belongs to the Special Issue on Material Processing
Evaluation of Delivery Analysis to Detect Intrafractional Motion during Tomotherapy (Articles)

Kazuo Tarutani, Masao Tanooka, Keisuke Sano, Okada Wataru, Masayuki Fujiwara, Koichiro Yamakado

International Journal of Medical Physics, Clinical Engineering and Radiation Oncology Vol.8 No.4, November 14, 2019

DOI: 10.4236/ijmpcero.2019.84020 1,034 Downloads 3,218 Views Citations
Optical and Electrochemical Properties of Non-Peripheral Thioaryl-Substituted Subphthalocyanine as Precursors for Dye-Sensitizer to Develop Photovoltaic Cells (Articles)

Keiichi Sakamoto, Satoru Yoshino, Makoto Takemoto, Kazuhiro Sugaya, Hitomi Kubo, Tomoe Komoriya, Shinnosuke Kamei, Shigeki Furukawa

American Journal of Analytical Chemistry Vol.5 No.15, November 24, 2014

DOI: 10.4236/ajac.2014.515110 3,946 Downloads 5,402 Views Citations
This article belongs to the Special Issue on Applied Electrochemistry
Micro T-Mixer with Baffles: Effect of Baffle Height and Setting Angle on Mixing (Articles)

Miah Md Ashraful Alam, Taichi Hirano, Yasutaka Hayamizu, Takuya Masuda, Tatsuki Hamada, Shinichi Morita, Manabu Takao

Open Journal of Fluid Dynamics Vol.13 No.4, September 27, 2023

DOI: 10.4236/ojfd.2023.134015 329 Downloads 1,319 Views Citations
Effects of Secondary Chamber on Gas Yield by Pre-Vacuum Chamber Pyrolysis of Rubber Wood (Articles)

Hiroki Homma, Hiroomi Homma, Sihar Siahaan

Journal of Sustainable Bioenergy Systems Vol.7 No.1, February 13, 2017

DOI: 10.4236/jsbs.2017.71001 1,873 Downloads 3,183 Views Citations
Crack Growth Behavior in Cemented Carbide by Repeated Thermal Shock (Articles)

Sotomi Ishihara, Hiroshi Shibata, Kenichi Masuda, Hiroko Mikado, Minoru Ishiguro

Materials Sciences and Applications Vol.9 No.4, April 11, 2018

DOI: 10.4236/msa.2018.94023 968 Downloads 2,623 Views Citations
This article belongs to the Special Issue on Material Fatigue and Fracture
Wake-Induced Bypass Transition over a Flat Plate under Favorable and Adverse Pressure Gradients (Articles)

Eitaro Koyabu, Tetsuhiro Tsukiji

Journal of Flow Control, Measurement & Visualization Vol.1 No.1, April 29, 2013

DOI: 10.4236/jfcmv.2013.11003 3,319 Downloads 7,627 Views Citations
The Research about Prescribed Workspace for Optimal Design of 6R Robot (Articles)

Yi Gan, Weiwei Yu, Weiming He, Junlei Wang, Fujia Sun

Modern Mechanical Engineering Vol.4 No.3, August 28, 2014

DOI: 10.4236/mme.2014.43015 5,062 Downloads 6,516 Views Citations
Study on Collision Process of Opposing Unsteady Supersonic Jets and Shock Waves (Articles)

Sakira Uno, Hiroshi Fukuoka, Atsushi Suda, Ikurou Umezu

Open Journal of Fluid Dynamics Vol.13 No.2, May 25, 2023

DOI: 10.4236/ojfd.2023.132008 336 Downloads 1,509 Views Citations
This article belongs to the Special Issue on 9th Asian Joint Workshop on Thermophysics and Fluid Science (AJWTF)
A Study on Relationship among Blade Camber Direction and Pitch Angle and Performance of a Small Straight-Blade Darrieus Wind Turbine by Using Scale Test Model and Gurney Flap (Articles)

Tadakazu Tanino, Keisuke Hara, Ryo Yoshihara, Takeshi Miyaguni

Journal of Flow Control, Measurement & Visualization Vol.9 No.2, April 25, 2021

DOI: 10.4236/jfcmv.2021.92003 824 Downloads 2,578 Views Citations
Microstructure and Mechanical Properties of NiTi₂-TiB Composite Fabricated by Spark Plasma Sintering (Articles)

Masashi Yoshida, Hideo Shiraishi, Naoya Ikki

World Journal of Engineering and Technology Vol.3 No.3C, October 22, 2015

DOI: 10.4236/wjet.2015.33C013 4,732 Downloads 5,948 Views Citations

First <123 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies