Pulsed Laser Heating of a Finite Silver Selenide Slab Using (HHCE) Model ()
1. Introduction
Heating sources of high power densities such as laser sources and microwaves have arisen recently an increasing interest of many investigators [1]. Such heating interaction has vital applications in different fields related to material processing such as spot wilding, laser cutting, surface annealing and drilling of metals [1] [2] [3] [4] [5] . In semiconductor industry, many other applications are developed including both local diffusion and alloying to form p-n junctions. The most spectacular effects involve a change of phase of the absorbing material [1] [6] [7] [8] [9] . In many applications, it is particularly important to reveal the temperature distribution within the irradiated target, and the time required to initiate phase transition and to initiate melting.
Many authors assess theoretically such temperature profiles solving the heat conduction equation [3] [6] [8] - [22] .
In principal, there are two trends concerning this point. One trend assumes that heat propagates with infinite velocity through the heated target (Parabolic heat conduction equation (PHCE)). The other trend suggests that heat propagates with finite velocity leading to the hyperbolic heat conduction equation (HHCE) [23] [24] [25] [26] [27] especially when extremely short laser pulse or very high frequencies are concerned. The existence of thermal waves propagating with a finite speed has been demonstrated experimentally [28] [29] . Several analytic and numerical solutions of such problems have been reported [23] [24] [25] [26] [30] [31] [32] .
The present article represents a study of the problem of laser heating of a homogeneous finite slab of Silver Selenide (Ag2Se) material considering the hyperbolic heat conduction equation (HHCE). Ag2Se compound is of great technological importance as a promising thermoelectric power generator material [33] , it has also applications in the field of the switching devices [34] [35] . Also it is well known that silver selenide Ag2Se undergoes a polymorphic phase transition [34] . It has two phases one below 400 degree Kelvin and is identified as β-Ag2Se phase with orthorhombic structure, the other phase is at higher temperatures and is called α-Ag2Se phase with body-centered-cubic (bcc) form.
Moreover, silver selenide material shows semiconducting nature up to 403 degree Kelvin and then it shows a metallic nature with rise in temperature [34] .
It is observed [34] that it undergoes this phase transition at (403 ± 2) degree Kelvin.
This alpha-beta transition temperature does depend on the pressure [36] . Moreover, it is revealed [37] that the phase transition temperature is affected by the heating rate and that it increases with a decrease of its thickness.
The aim of the present trial is to find analytically the temperature field within an Ag2Se-slab subjected to a pulsed laser as a heating source. This makes it possible to determine the time required to initiate phase transition in such material, and the critical time required to initiate melting at the irradiated front surface of the considered slab. The problem is formulated in the light of the hyperbolic heat conduction equation (HHCH) in dimensionless form. Laplace integral transform technique is considered to get the required solutions. Computations on silver selenide slab are given as an illustrative example.
2. Mathematical Formulation
In sitting up the problem a finite homogeneous slab of silver selenide Ag2Se material is heated using laser flux of power density q(t), W∙m2 incident perpendicularly on its front surface. It is assumed that a part of the incident laser flux will be reflected at the front surface and a part will be absorbed by the target material.
It is also assumed that heat losses due to convection and thermal radiations are neglected [37] . The physical properties of the slab material are assumed to be temperature independent [37] . Several papers have been written on the thermoelectric properties, the thermal conductivity, Seebeck coefficient and the resistivity of silver selenide [33] [38] . The values λ(T) obtained in [33] revealed that the thermal conductivity λ(T) increases monotonously with increasing temperature such that Δλ/ΔT ≈ 7.76 × 10−7 W∙m∙K2 [33] [39] .
This weak temperature dependence makes it possible to accept the assumption that its thermal conductivity is temperature independent for the considered temperature intervals [39] . The heat flow for our case is considered to be one dimensional [1] [2] . The x-axis normal to the free surface of the slab is taken in the direction of the incident laser beam. The hyperbolic heat conduction equation (HHCE) is considered according to which the thermal effects propagate within the target with a finite velocity and thus a thermal relaxation time is involved in the related equations.
For such a case the modified Fourier equation (Cattaneo equation) is considered in the form:
(1)
where
is the thermal relaxation time (2)
is the thermal diffusivity in terms of the thermal conductivity l,
W∙m∙K, the density r, kg/m3, the specific heat cp, j/kg∙K, and W, m/sec is the speed of the propagation of the thermal wave in the medium.
Equation (1) with the following conservation energy equation:
(3)
Leads to the hyperbolic heat conduction equation (HHCE) in the form:
(4)
Considering the following dimensionless scales:
(5)
(6)
(7)
(8)
(9)
where,
is the ambient temperature,
the melting temperature, and R is the reflectivity at the front surface.
One obtains Cattaneo equation in dimensionless form as:
(10)
the energy conservation equation in the dimensionless scale attains the form:
(11)
and the hyperbolic heat conduction equation (HHCE) in the following dimensionless form is:
(12)
Equation (12) is subjected to the following dimensionless initial and boundary conditions:
(13)
(14)
(15)
Equation (14) indicates that the rear surface of the target is insulated.
Laplace integral transform technique is applied to solve Equation (12). Taking Laplace transform on Equation (12) w.r.t. the time t one gets:
(16)
The solution of equation (16) is as follows:
(17)
at X = 0 one gets:
(18)
And at
one gets:
Thus:
(19)
Taking Laplace transform to the boundary condition Equation (15) one gets:
,
At the front surface X = 0 this equation can be rewritten as:
, Where
(20)
Comparing the two Equations (18), (20) A and B can be obtained as follows:
or:
Multiplying both sides by
then by
respectively one gets:
(21)
(22)
Subtracting (19), (21) one gets:
Thus:
Also from (19), (22) one gets:
Thus:
Substituting in Equation (17) one gets:
Considering that:
[39]
Thus:
This gives:
Neglecting the last term with respect to the first one, one gets:
This equation can be rewritten in the form:
Let,
we get:
(23)
From Equation (9):
(24)
(25)
We have: [40]
Put:
one gets:
(26)
The modified Bessel function
is written in the following form: [41]
(27)
Comparing (25), (26) (at
) one gets:
(28)
Thus the inverse in time domain is as follows:
(29)
where:
(30)
The convolution theorem:
(31)
Thus
(32)
Also we have:
,
For such a case one has
, thus:
(33)
(34)
where:
,
, W/m2 is the laser maximum power density
At x = 0 we get:
(35)
3. Computations
The obtained thermal profile is computed for different laser pulses with different maximum power densities as follows:
The laser pulse shape is taken of Gaussian form as:
, γ is
the full width at half maximum of the suggested pulse, t0 in seconds is the time required for
to reach the maximum value
.
The other laser pulse parameters are as follows: t0 = 6 μsec, γ = 6 μ sec. pulse duration = 12 μsec, the slab thickness = 300 μm, the absorption coefficient A = 0.67, tk = 1 μsec.
The physical and thermal properties of the silver selenide slab material [42] [43] are given in Table 1.
The temperature of the irradiated front surface
for the different pulses is computed and are illustrated graphically in Figure 1 and Figure 2 and are tabulated in Table 2 for m = 1, n = 1, and in Table 3 for m = 1, n = 1.2.
The critical time tph required to start phase transition, and the critical time tm required to initiate melting at the front surface are obtained for the considered pulses and are tabulated in Table 4 for m = 1, n = 1, and in Table 5 for m = 1, n = 1.2 and are illustrated graphically in Figure 3 and Figure 4.
4. Conclusions
As a result of the study the following conclusions can be made:
1) The temperature of the irradiated surface does depend linearly on the maximum power density qmax of the laser pulse and also on the absorption coefficient (1 − R).
2) The dependence on the slab thickness and the pulse parameters γ & t0 are no longer linear.
3) The dependence of the tph and tm on qmax is not linear.
Table 1. The physical and thermal properties of the silver selenide slab material [42] [43] .
Table 2. The temperature of the front surface as a function of the qmax, W/m2 and exposure time, (m = 1, n = 1).
Table 3. The temperature of the front surface as a function of the qmax, W/m2 and exposure time, (m = 1, n = 1, 2)
Table 4. The critical time tph required to start phase transition, and the critical time tm required to initiate melting at the front surface are obtained for the considered pulses for m = 1, n = 1.
Table 5. The critical time tph required to start phase transition, and the critical time tm required to initiate melting at the front surface are obtained for the considered pulses for m = 1, n = 1, 2.
Figure 1. The temperature of the irradiated front surface as a function of the laser exposure time “t”. qmax = 0.2 × 107 W/m2, m = 1 and n = 1.
Figure 2. The temperature of the irradiated front surface as a function of the laser exposure time “t”. qmax = 0.2 × 107 W/m2, m = 1 and n = 1.
Figure 3. The critical time tph required to start phase transition as a function of the maximum power density of the laser pulse for m = 1 and n = 1. The other parameters are kept constant.
Figure 4. The critical time tph required to start phase transition and the critical time tm required to initiate melting as a function of the maximum power density of the laser pulse for m = 1 and n = 1, 2. The other parameters are kept constant.
4) Successive pulses may be required to initiate phase transition or melting.
5) For the summation over “m” and “n” one gets acceptable values for θ(0, t) only for m = 1.
But for m > 1 one gets negative values.
Increasing values of θ(0, t) are obtained with increasing n values.
6) The extension of the present technique to other materials makes it possible to specify the optimum operation conditions to attain and maintain a certain phase for specific medical and technological applications.