Reconfigure ZigBee Network Based on System Design
Yuan XU, Shubo QIU, Meng HOU
.
DOI: 10.4236/wsn.2009.13027   PDF    HTML     7,058 Downloads   12,746 Views   Citations

Abstract

This article analyses key technology used by network layer based on ZigBee technology. Then a reconfigure network as well as its strategy of forming network and distributing node is given. The simulation proved that the stability of reconfigure network and the ability of transmitting pass through obstacle are better than tradi-tional network; it has an active significance for shorter delay because of the flexible of the improved forming network strategy.

Share and Cite:

Y. XU, S. QIU and M. HOU, "Reconfigure ZigBee Network Based on System Design," Wireless Sensor Network, Vol. 1 No. 3, 2009, pp. 206-211. doi: 10.4236/wsn.2009.13027.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] IEEE Standards 802.15.4TM-2003, Wireless medium access control (MAC)and physical layer(PHY) specifications for low-rate wireless personal area networks (LR-WPANs) [S].
[2] ZigBee Alliance, ZigBee Specification, ZigBee Document 053474r06 Version 1.0 [S], 2004.
[3] ZigBee Alliance, ZigBee Specification Version 2.0, December 2006, http://www.zigbee.org.
[4] C. Perkins, E. Belding-Royer, and S.Das, RFC 3561, “Ad hoe on demand distance vector (AODV) Routing [S],” July 2003.
[5] I. D. Chakeres and K. B. Luke, AODVjr, AODV simplified [J], ACMSIG-MOBILE Mobile Computing and Communications Review, Vol. 6, No. 3, pp. 100–101, 2002.
[6] L. Kleinrock and F. A. Tobagi, “Packet switching in radio channels: Part 1-Carrier sense multiple-access modes and their throughput-delay characteristics,” IEEE Transactions on Communications, Vol. COM-23, pp. 1400–1416, December 1975.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.