[1]
|
C. A. Moina and M. Vazdar, “Electrodeposition of Nano- Sized Nuclei of Magnetic Co-Ni Alloys onto n-Si (100),” Electrochemistry Communications, Vol. 3, 2001, pp. 159- 163. doi:10.1016/S1388-2481(01)00114-X
|
[2]
|
M. Srivastava, V. E. Selvi, V. K. W. Grips and K. S. Rajam, “Corrosion Resistance and Microstructure of Electrodeposited Nickel–Cobalt Alloy Coatings,” Surface & Coatings Technology, Vol. 201, 2006, pp. 3051-3060.
doi:10.1016/j.surfcoat.2006.06.017
|
[3]
|
L. Peter, J. Padar, E. Toth-Kadar, A. Cziraki, P. Soki, L. Pogany and I. Bakonyi, “Electrodeposition of Co–Ni–Cu/ Cu Multilayers 1. Composition, Structure and Magnetotransport Properties,” Electrochimica Acta, Vol. 52, 2007, pp. 3813-3821. doi:10.1016/j.electacta.2006.10.058
|
[4]
|
A. N. Correia and S. A. S. Machado, “Electrodeposition and Characterisation of Thin Layers of Ni-Co Alloys Obtained from Dilute Chloride Baths,” Electrochimica Acta, Vol. 45, 2000, pp. 1733-1740.
doi:10.1016/S0013-4686(99)00405-3
|
[5]
|
D. Golodnitsky, Y. Rosenberg and A. Ulus, “The Role of Anion Additives in the Electrodeposition of Nickel-/Cobalt Alloys from Sulfamate Electrolyte,” Electrochimica Acta, Vol. 47, 2002, pp. 2707-2714.
doi:10.1016/S0013-4686(02)00135-4
|
[6]
|
A. Bai and C.-C. Hu, “Iron–Cobalt and Iron–Cobalt– Nickel Nanowires Deposited by Means of Cyclic Voltammetry and Pulse-Reverse Electroplating,” Electroche- mistry Communications, Vol. 5, 2003, pp. 78-82.
doi:10.1016/S1388-2481(02)00540-4
|
[7]
|
A. Bai and C.-C. Hu, “Composition Controlling of Co–Ni and Fe–Co Alloys Using Pulse-Reverse Electroplating through Means of Experimental Strategies,” Electroch- imica Acta, Vol. 50, 2005, pp. 1335-1345.
doi:10.1016/j.electacta.2004.07.055
|
[8]
|
E. Gomez, S. Pane and E. Valles, “Electrodeposition of Co–Ni and Co–Ni–Cu Systems in Sulphate–Citrate Medium,” Electrochimica Acta, Vol. 51, 2005, pp. 146-153.
doi:10.1016/j.electacta.2005.04.010
|
[9]
|
B. Chi, J. Li, X. Yang, Y. Gong and N. Wang, “Deposition of Ni–Co by Cyclic Voltammetry Method and Its Electrocatalytic Properties for Oxygen Evolution Reaction,” International Journal of Hydrogen Energy, Vol. 30, 2005, pp. 29-34. doi:10.1016/j.ijhydene.2004.03.032
|
[10]
|
B. Tury, M. Lakatos-Varsanyi and S. Roya, “Ni–Co Alloys Plated by Pulse Currents,” Surface & Coatings Technology, Vol. 200, 2006, pp. 6713-6717.
doi:10.1016/j.surfcoat.2005.10.008
|
[11]
|
W. E. G. Hansal, B. Tury, M. Halmdienst, M. L. Varsanyi and W. Kautek, “Pulse Reverse Plating of Ni–Co Alloys: Deposition Kinetics of Watts, Sulfamate and Chloride Electrolytes,” Electrochimica Acta, Vol. 52, 2006, pp. 1145-1151. doi:10.1016/j.electacta.2006.07.012
|
[12]
|
V. D. Jovic, B. M. Jovic and M. G. Pavlovic, “Electrodeposition of Ni, Co and Ni–Co Alloy Powders,” Electrochimica Acta, Vol. 51, 2006, pp. 5468-5477.
doi:10.1016/j.electacta.2006.02.022
|
[13]
|
V. D. Jovic, B. M. Jovic, V. Maksimovic and M. G. Pavlovic, “Electrodeposition and Morphology of Ni, Co and Ni–Co Alloy Powders Part II. Ammonium Chloride Supporting Electrolyte,” Electrochimica Acta, Vol. 52, 2007, pp. 4254-4263. doi:10.1016/j.electacta.2006.12.003
|
[14]
|
A. Dolati, M. Sababi, E. Nouri and M. Ghorbani, “A Study on the Kinetic of the Electrodeposited Co–Ni Alloy Thin Films in Sulfate Solution,” Materials Chemistry and Physics, Vol. 102, 2007, pp. 118-124.
doi:10.1016/j.matchemphys.2006.07.009
|
[15]
|
R. Orinakova, A. Oriňák, G. Vering, I. Talian, R. M. Smith and H. F. Arlinghaus, “Influence of pH on the Electrolytic Deposition of Ni–Co Films,” Thin Solid Films, Vol. 516, 2008, pp. 3045-3050.
doi:10.1016/j.tsf.2007.12.081
|