RETRACTED:Developments of Multifunctional Additives for High Quality Lube Oil

Noura El Mehbad

Faculty of Science, Nagran University, Saudi Arabia of Kingdom..

DOI: 10.4236/jpee.2013.15014                

Abstract

Short Retraction Notice 

This article has been retracted to straighten the academic record. In making this decision the Editorial Board follows COPE's Retraction Guidelines. The aim is to promote the circulation of scientific research by offering an ideal research publication platform with due consideration of internationally accepted standards on publication ethics. The Editorial Board would like to extend its sincere apologies for any inconvenience this retraction may have caused. 

Please see the article page for more details. The full retraction notice in PDF is preceding the original paper which is marked "RETRACTED".

Keywords

Lubrication Oil; Polymers; Additives of Base Oil; Micelles

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	T. T. Khidr, E. M. S. Azzam, S. Mutwaa and A. M. A. Omar, “Study of Some Anionic Surfactants as Pour Point Depressant Additives for Wax Gas Oil,” Industrial Lubrication and Tribology, Vol. 59, No. 2, 2007. pp. 64-68. http://dx.doi.org/10.1108/00368790710731855
[2]	T. T. Khidr and A. M. A. Omar, “Anionic/Nonionic Mixture of Surfactants for Pour Point Depression of Gas Oil Egyptian,” Journal of Petroleum, Vol. 12, 2003, pp. 21-26.
[3]	T. T. Khidr, D. Ismail and A. M. A. Omar, “Improving the Flow Properties of n-Paraffin Gas Oil by Cationic and Non-Ionic Surfactants,” Journal of Faculty of Education, Vol. 25, 2000, pp. 121-135.
[4]	C. Kaidas, M. Makowska and M. Gradkowski, “Influence of Temperature on Tribochemical Reactions of n-Hexadecane,” 2nd World Tribology Congress, 3-7 September 2001, p. 225.
[5]	N. Elmehbad, “Development Antioxidants Synthesized by Phase Transfer Catalysts for Lubricating Oil,” Biotech Conference, Expo, 12-16 May 2013
[6]	A. M. A. Omar, “Micellization and Adsorption of Anionic/Nonionic Polymer Surfactants for Metal Working Fluid at Different Interfaces,” Industrial Lubrication and Tribology, Vol. 56, No. 3, 2004, pp. 171-176. http://dx.doi.org/10.1108/00368790410532200
[7]	T. R. Marquat, G. B. Dellow and E. R. Freitaus, Analytical Chemistry, Vol. 40, No. 11, 1968, p. 1633.
[8]	A. M. A. Omar, Journal of Petroleum Science and Technology, Vol. 19, No. 7-8, 2001, pp. 11-21.
[9]	M. Y. El Kady, A. K. El Morsi, N. Tantawi, A. Z. El Tabei and A. M. A. Omar, “A New Trend for Preparing Polymeric Calcium Sulphonates for Metal q Working Fluids,” Journal of Annals of University, Dunarea De Jos of Galati, Tribology, Fascice, Romania, Vol. 11, 2006.
[10]	S. H. Hasting, B. H. Johnson, H. E. lumpkin and R. B. Wiliam, “Symposium on Composition of Petroleum Oils Determination,” American Society for Testing Materials, 1958.