Safety Distance Determination for 500 kV AC Transmission Line’s Helicopter Inspection

Abstract

As an efficient and advanced line inspection method, helicopter line patrol is gradually more and more used in transmission lines inspection, promoting the elaborate operation of transmission lines and reducing the management cost. However, as a 'floating-potential conductor' near to a high-voltage transmission line, the helicopter would be at a high electric field region; and bring security risk to equipment and operating personnel. In this paper, the electric field strength near the cabin at locations of different distance from transmission lines is investigated by calculation, and the field in the helicopter cabin is also calculated with finite element method (FEM). The result indicates that the potential difference becomes higher with the decrease of the distance between the helicopter and transmission line. Considering the discharge energy and the guarantee of the persons’ safety, the safety distance is determined as d≥15 m.

Share and Cite:

S. Wan, X. Bian, L. Chen, L. Wang and Z. Guan, "Safety Distance Determination for 500 kV AC Transmission Line’s Helicopter Inspection," Energy and Power Engineering, Vol. 5 No. 4B, 2013, pp. 1153-1158. doi: 10.4236/epe.2013.54B219.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] L. M. Alexander and O. K, Mangum, “Economics of Transmission-line Maintenance and Repair by Helicopter,” Transactions AIEE on Power Apparatus and Systems, Part III., Vol. 72, 1953, pp. 1044-1050.
[2] J. Toth and A. Gilpin-Jackson, “Smart View for a Smart Grid Unmanned Aerial Vehicles for Transmission Line,” Proceedings of 1st International Conference on Applied Robotics for the Power Industry, Vancouver, BC, Canada,2010, pp.1-6.
[3] J. W. Smith, G. Gela and M. F. McGranaghan, “Control of Line-to-line Overvoltages for Helicopter-based Live Work on a 500kV Transmission Line,” 2008 IEEE Power and Energy Society General Meeting – Conversion and Delivery of Electrical Energy in the 21st Century, Pittsburgh, PA, US, 2008, pp.1-7.
[4] IEEE ESMOL Subcommittee, “Recommended Practices for Using a Helicopter in a Wire Environment,” IEEE 11th International Conference on Transmission & Distribution Construction, Operation and Live-Line Maintenance, Albuquerque, NM, USA, pp.1-7, 2006.
[5] E. L. Harris, B. D. Rindall, N. J. Tarko and O. C. Norris-Elye, “The Effect of a Helicopter on dc Fields and Ions,” IEEE Transaction on Power Delivery, Vol. 8, 1993, pp. 1837-1841. doi:10.1109/61.248292
[6] C. Y. Zang, H. S. Ye and H. C. Lei, “Using Ultraviolet Imaging Method to Detect the External Insulation Faults of Electric Device,” IEEE Conference on Electrical Insulation and Dielectric Phenomena, Wuhan, China, 2009, pp. 26-30.
[7] H. Ha, S. Han and J. Lee, “Fault Detection on Transmission Lines Using a Microphone Array and an Infrared Thermal Imaging Camera,” IEEE Transactions on Instrumentation and Measurement, Vol. PP, 2011, pp. 1-9.
[8] C. Y. Zang, J. J. He and X. G. Yin, “Status and Application Foreground of Ultraviolet Technology on Fault Detection of Power Devices,” International Conference on Condition Monitoring and Diagnosis, 2008, pp. 122-125.
[9] G. Jaensch, H. Hoffmann and A. Markees, “Locating Defects in High Voltage Transmission Lines,” Proceedings of IEEE 8th International Conference on Transmission & Distribution Construction, Operation & Live-Line Maintenance, Orlando, FL, USA, 1998, pp. 179-186.
[10] L. Du, T. Cui and C.X. Sun, “Detecting AC Corona DisCharges with the UV-TRONR2862-Type Ultraviolet Sensor,” High Voltage Engineering, Vol. 35, 2009, pp. 272-276.
[11] Tadasu, Takuma and K. Tadashi, “Numerical Calculation of Electric Fields with a Floating Conductor,” IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 4, 1997, pp. 177-181. doi:10.1109/94.595244
[12] L. Dascalescu, P. Ribardiere and J. Paillot, “Computational Estimation of ESD Conditions between a Charged Body and a Conductor of Floating Potential,” IEEE Transactions on Industry Applications, Vol. 37,2001, pp. 759-765. doi:10.1109/28.924756
[13] D. Yu, S. Wan, F. Chen, et al., “The Effect of Foating-potential Conductors on the Electric Feld near OverHead Transmission Lines,” Journal of Electrostatics, Vol. 70, No. 3, 2012, pp. 339-345. doi:10.1016/j.elstat.2012.04.003
[14] A. Konrad and M. Graovac, “The Finite Element Modeling of Conductor and Floating Potential,” IEEE Transactions on Magnetics, Vol. 32, 1996, pp. 4329-4331. doi:10.1109/20.538859
[15] H. Zildzo, A. Muharemovic, I. Turkovic and H. Matoruga, “Numerical Calculation of Floating Potential for Large Earthing System,” 22nd Int. Symp. on Information, Communication and Automation Technologies, Bosnia, 2009, pp. 1-6.
[16] A. Castellani, A. Bondiou-Clergerie, P. Lalande, A. Bonamy and I. Gallimberti, “Laboratory Study of the Bileader Process from an Electrically Floating Conductor,” IEE Proceedings - Science, Measurement and Technology, Vol. 145, 1998, pp. 193-199. doi:10.1049/ip-smt:19982011
[17] M. Abdel-Salam, M. T. El-Mohandes and H. El-Kishky, “Electric Field around Parallel DC and Multi-phase AC Transmission Lines,” IEEE Transactions on Electrical Insulation, No. 25, 1990, pp. 1145-1152.
[18] M. Trlep, A. Hamler, M. Jesenik, et al., “Electric Field Distribution under Transmission Lines Dependent on Ground Surface,” IEEE Transactions on Magnetics, 2009, No. 45, pp. 1748-1751.
[19] Y. Yang, J. Lu and Y. Lei, “A Calculation Method for the Hybrid Electric Field under UHVAC and UHVDC Transmission Lines in the Same Corridor,” IEEE Transactions on Power Delivery, Vol. 25, No. 2, 2010, pp. 1146-1153. doi:10.1109/TPWRD.2009.2036359
[20] A. Z. E. Dein, M. A. A. Wahab, M. M. Hamada, et al., “The Effects of the Span Configurations and Conductor Sag on the Electric-field Distribution under Overhead Transmission Lines,” IEEE Transactions on Power Delivery, No. 25, 2010, pp. 2891-2902. doi:10.1109/TPWRD.2010.2051340
[21] K. Hameyer, R. Mertens and R. Belmans, “Numerical Methods to Evaluate the Electromagnetic Fields Below Overhead Transmission Lines and Their Measurement,” Proceeding of First IEEE International Conference on Devices, Circuits and Systems, Caracas, Venezuela, 1995, pp. 32-36.
[22] J. Zhang, G. Zhang, X. Zhang, et al., “Simulation Experiment and Calculation of DC Electric Field Caused by DC Transmission Line at High Altitude Districts,” High Voltage Engineering, Vol. 35, No. 8, 2009, pp. 1970-1974.
[23] R. Amiri, H. Hadi and M. Marich, “The Influence of Sag in the Electric Field Calculation around High Voltage Overhead Transmission Lines,” IEEE Conference on Electrical Insulation and Dielectric Phenomena. 2006, pp. 206-209.
[24] T. A. D. C. Society, IEEE Guide for Maintenance Methods on Energized Power Lines, 2009.
[25] P. Zhao, C. Deng and Y. Yuan, “Patrol of Transmission Line with Helicopter,” North China Electric Power, No. 10, 2002, pp. 1-3.
[26] J. S. Jung, J. W. Jung and S. Kim, “Transient Phenomena Analysis of Electric Shock Using ATPDraw,” ICEE Conference on Progress, July. 2007.
[27] J. D. Tranen and G. L. Wilson, “Electrostatically Induced Voltages and Currents on Conducting Objects under EHV Transmission Lines,” IEEE Tranactions on Power Apparently Systems, Vol. pas-90, No. 2, March/April, 1971.
[28] L. R. Delaplace and J. P. Reilly, “Electric and Magnetic Field Coupling from High Voltage ac Power Transmission Lines – classification of short – term effects on People,” IEEE Tranactions on Power Apparently Systems, Vol. pas-97, 1987, pp. 2243-2252.
[29] J. G. Anderson, “Transmission Line Reference Book 345 KV and above,” Electric Research Council and Electric Power Research Institute, Palo Alto, 1982.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.