Indoor Air Quality Study on Fiber Glass Industry

Abstract

The most hazardous chemical used in fiber glass industry are: formaldehyde, phenol and ammonia. The chemicals were monitored in an industry in Kuwaitto investigate the indoor air quality of the facility. It was found that all these chemicals were within the OSHA standards but formaldehyde exceeded KEPA standards (0.1 ppm) in the curing area. It was found that lower density of fiber glass product leads to higher concentration of pollutants in the atmosphere andvise versa. Moreover, higher thickness causes higher concentration of pollutants in the atmosphere.

Share and Cite:

Alhaddad, A. and Al-Abdulmohsin, B. (2013) Indoor Air Quality Study on Fiber Glass Industry. Engineering, 5, 42-46. doi: 10.4236/eng.2013.510B009.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] A. Prüss-Ustün, C. Vickers, P. Haefliger and R. Bertollini, “Knowns and Unknowns on Burden of Disease Due to Chemicals: A Systematic Review,” Environmental Health, Vol. 10, 2011, p. 9. http://dx.doi.org/10.1016/j.scitotenv.2011.11.017
[2] A. Bohlandt, R. Schierl, J. Diemer, C. Koch, G. Bolte, M. Kiranoglu, H. Fromme and D. Nowak, “High Concentrations of Cadmium, Cerium and Lanthanum in Indoor Air Due to Environmental Tobacco Smoke,” Science of the Total Environment, Vol. 414, 2012, pp. 738-741. http://dx.doi.org/10.1016/j.scitotenv.2011.11.017
[3] E. Gallego, X. Roca, J. F. Perales and X. Guardino, “Determining Indoor Air Quality and Identifying the Origin of Odour Episodes in Indoor Environments,” Journal of Environmental Sciences, Vol. 21, 2009, pp. 33-339. http://dx.doi.org/10.1016/S1001-0742(08)62273-1
[4] K. G1adyszewska-Fiedoruk, “Indoor Air Quality in the Cabin of an Airliner,” Journal of Air Transport Management, Vol. 20, 2012, pp. 28-30.
[5] K. Al-Rashidia, D. Lovedaya and N. Al-Mutawab, “Impact of Ventilation Modes on Carbon Dioxide Concentration Levels in Kuwait Classrooms,” Energy and Buildings, Vol. 47, 2012, pp. 540-549. http://dx.doi.org/10.1016/j.enbuild.2011.12.030
[6] M. Yassin, B. AlThaqeb and E. Al-Mutiri, “Assessment of Indoor PM2.5 in Different Residential Environments,” Atmospheric Environment, Vol. 56, 2012, pp. 65-68. http://dx.doi.org/10.1016/j.atmosenv.2012.03.051
[7] P. Sripaiboonkij, N. Sripaiboonkij, W. Phanprasit and M. S. Jaakkola, “Respiratory and Skin Health among Glass Microfiber Production Workers: A Cross-Sectional Study,” Environmental Health, Vol. 8, 2009, p. 36. http://dx.doi.org/10.1186/1476-069X-8-36
[8] S. C. Sofuoglua, G. Aslanb, F. Inal and A. Sofuoglua, “An Assessment of Indoor Air Concentrations and Health Risks of Volatile Organic Compounds in Three Primary Schools,” International Journal of Hygiene and Environmental Health, Vol. 214, 2001, pp. 36-46. http://dx.doi.org/10.1016/j.ijheh.2010.08.008

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.