Effect of Carbonitriding on Endurance Life of Ball Bearing Produced from SAE 52100 Bearing Steels

Abstract

The present paper reports the unusual enhancement of endurance life of ball bearings subjected to carbonitriding treatment. The microstructure was characterized by scanning electron microscopy and correlated with hardness and X-ray diffraction analysis. Endurance tests at 90% reliability revealed that the carbonitrided bearings exhibit nearly ten times more life than the non-carbonitrided bearings. This is attributed to synergic combination of retained austenitic, fine martensitic microstructure and ultrafine carbide precipitates obtained by carbonitriding treatment.

Share and Cite:

Rajan, K. , Joshi, V. and Ghosh, A. (2013) Effect of Carbonitriding on Endurance Life of Ball Bearing Produced from SAE 52100 Bearing Steels. Journal of Surface Engineered Materials and Advanced Technology, 3, 172-177. doi: 10.4236/jsemat.2013.33023.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] H. K. D. H. Bhadeshia, “Steels for Bearings,” Progress in materials Science, Vol. 57, No. 2, 2012, pp. 268-435. doi:10.1016/j.pmatsci.2011.06.002
[2] S. Stewart and R. Ahmed, “Rolling Contact Fatigue of Surface Coatings—A Review,” Wear, Vol. 253, No. 11-12, 2002, pp. 1132-1144. doi:10.1016/S0043-1648(02)00234-X
[3] W. Schilling, “Self-Interstitial Atoms in Metals,” Journal of Nuclear Materials, Vol. 69-70, 1978, pp. 465-489.
[4] R. C. Dommarco, K. J. Kozaczek, P. C. Bastias, G. T. Hahn and C. A. Rubin, “Residual Stresses and Retained Austenite Evolution in SAE 52100 Steel under Non-Ideal Rolling Contact Loading,” Wear, Vol. 257, No. 11, 2004, pp. 1081-1088. doi:10.1016/j.wear.2004.01.020
[5] F. B. Pickering, “The Structure and Properties of Bainite in Steels,” Symposium: Transformation and Hardenability in Steels, Michigan, 1967, pp. 109-129.
[6] B. B. Vinokur, S. E. Kondratyuk, L. I. Markovskaya, R. A. Khrunik, A. A. Gurmaza and V. B. Vainerman, “Effect of Retained Austenite on the Contact Fatigue Strength of Carburized Steel,” Institute of Casting Problems,” Metal Science and Heat Treatment, Vol. 20, No. 11, 1978, pp. 927-930.
[7] N. Luzginova, L. Zhao and J. Sietsma, “Evolution and Thermal Stability of Retained Austenite in SAE 52100 Bainitic Steel,” Material Science and Engineering A, Vol. 448, No. 1-2, 2007, pp. 104-110. doi:10.1016/j.msea.2006.10.014
[8] M. Yaso, S. Hayashi, S. Morito, T. Ohba, K. Kubota and K. Murakami “Characteristics of Retained Austenite in Quenched High C-High Cr Alloy Steels,” Materials Transactions, Vol. 50, No. 2, 2009, pp. 275-279. doi:10.2320/matertrans.MRA2008161
[9] B. D. Cullity, “Elements of X-Ray Diffraction,” Addison-Wesley, Reading, 1978.
[10] J. D. Makinson, W. N. Weins and R. J. De Angelis, “The Substructure of Austenite and Martensite through a Carburized Surface,” Advances in X-Ray Analysis, Vol. 34, 1990, pp. 483-491.
[11] J. J. C. Hoo, “Rolling Contact Fatigue Testing of Bearings Steels,” ASTM Special Technical Publication, Philadelphia, 1981, pp. 169-189.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.