New System of Structural Health Monitoring

Abstract

Monitoring of structures is an important challenge faced by researchers worldwide. This study developed a new structural health monitoring system which utilized the use of microprocessors, wireless communication, transducer, and cellular transmission that allows remote monitoring. The developed system will facilitate the monitoring process at any time and in any location with less human interference. The system is equipped with data processing subsystem which works on detection of structural behavior irregularity, defects, and potential failures. The system was tested using strain gages to measure the developed strains in different applications and structural models. The results developed using the new system showed that the generated readings from the system followed correctly the expected trend according to structural concepts. The developed system accomplished the desired features of lower cost, less power, reduced size, flexibility and easier implementation, remote accessing, early detection of problems, and simplified representation of the results.

Share and Cite:

A. Gamal, A. ElSafty and G. Merckel, "New System of Structural Health Monitoring," Open Journal of Civil Engineering, Vol. 3 No. 1, 2013, pp. 19-28. doi: 10.4236/ojce.2013.31004.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] F. W. Klaiber, K. F. Dunker, T. J. Wipf and W. W. Sand- ers, “Methods of Strengthening Existing Highway Bridges,” NCHRP Rep. 293, Transportation Research Board, National Research Council, Washington DC, 1987.
[2] Minnesota Public Radio, “I-35W Bridge Fact Sheet,” 3 August 2007.
[3] B. F. Spencer Jr., M. E. Ruiz-Sandoval and N. Krata, “Smart Sensing Technology: Opportunities and Challenges,” Journal of Structural Control and Health Monitoring, Vol. 11, No. 4, 2004, pp. 349-368. doi:10.1002/stc.48
[4] J. P. Lynch and K. J. Loh, “A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring,” Shock and Vibration Digest, Vol. 38, No. 2, 2006, pp. 91-128. doi:10.1177/0583102406061499
[5] D. L. Mascarenas, M. D. Todd, G. Park and C. R. Farrar, “Development of an Impedance Based Wire-Less Sensor for Structural Health Monitoring,” Smart Materials and Structures, Vol. 16, No. 6, 2007, pp. 2137-2145. doi:10.1088/0964-1726/16/6/016
[6] C. R. Bennett, A. Chamorro, C. Chen, H. Solminihac and G. W. Flintsch, “Data Collection Technologies for Road Management,” 2007, in press.
[7] National Instruments, “Strain Gauge Measurement—A Tutorial,” 1989.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.