[1]
|
Malakule, “Grease Technology, Part I,” Tsikot, Philippines, 2003.
|
[2]
|
V. P. Sukhanov, “Petroleum Processing,” Mir Publishers, Moscow, 1982, p. 378.
|
[3]
|
W. Artemas, “Domain 1911 Edition of the Grocers,” Encyclopedia, New York, 2008.
|
[4]
|
C. J. Donahue, “Lubricating Grease: A Chemical Primer” Journal of Chemical Education, Vol. 83, No. 6, 2006, p. 862.
|
[5]
|
Y. Toomas, “Oil or Greases Lubrication,” 2001.
|
[6]
|
V. V. Sinitsyn, N. N. Grishin, G. F. Ogorodnikova and S. M. Utekhina, “Structural Compatibility of Rubbers and Lubricating Greases,” Chemistry and Technology of Fuels and Oils, Vol. 21, No. 4, 1985, pp. 26-27.
doi:10.1007/BF00723298
|
[7]
|
K. Tamakas and Y. Mansumori, “Yoshibisa,” Canadian Patent No. 5110489, 2000.
|
[8]
|
M. Brauer and Y. C. Chu, “Cable Grease Composition and Articles Incorporating Same,” US Patent No. 5348669, 1994.
|
[9]
|
M. Braver, “Polypropylene Compatible Grease Compositions for Optical Fiber Cable,” US Patent No. 5672640, 1997.
|
[10]
|
B. De Vivo, L. Egiziano, P. Lamberti, V. Tucci and CEIDP “Electrical Insulation and Dielectric Phenomena,” Annual Report, 14-17 October 2007, pp. 45-48.
|
[11]
|
R. John and W. David, “Shell Bitumen, the Shell Bitumen Industrial Hand Book,” Thomas Telford, London, 1995, p. 339.
|
[12]
|
M. A. E. Youssif, “Evaluation of Some Prepared Greases Based on Petroleum Wax Gel,” M.Sc. Thesis, Al-Azhar University, Cairo, 2009.
|
[13]
|
A. M. Hassan, “Greases from Some Petroleum and Coal Tar Products,” M.Sc. Thesis, Faculty of Science, Al-Azhar University, Cairo, 1978.
|
[14]
|
L. Meals, “Reinhold Plastic Applications Series, Silicon,” Reinhold Pub. Corp., New York, 1961, pp. 84, 204-205.
|
[15]
|
Gunderson and Hart, “Gunderson and Hart, Synthetic Lubricants,” Reinhold Puble. Corp., New York, 1962, pp. 259-263, 317-319, 355-356, 470-473.
|
[16]
|
L. Jan and B. Seven, “Hand Book of Grease Applications,” Industrial Lubrication and Tribology, Vol. 52, No. 5, 2000, p. 221.
|
[17]
|
V. P. Sukhanov, “Petroleum Processing,” Mir Publishers, Moscow, 1982, p. 17.
|
[18]
|
A. R. El-Adly and A. S. Ward, “Evaluation of different grades of lube base oils as insulating oil,” Egyptian Journal of Petroleum, Vol. 13, No. 1, 2004, p. 69.
|
[19]
|
I. G. Fuks, M. B. Bakaleinikov and V. V. Samgina, “Structurizing Effect of Polyethylene and Polyisobutylenes in Oils and Greases,” Chemistry and Technology of Fuels and Oils Article, Vol. 10, No. 7, 1974, p. 559.
|
[20]
|
M. A. Youssif, M. Y. Abed and I. M. EL-Anwar, “Preparation and Dielectric Properties of Methylemethacry-Late-Parabanic Acid Polymer Using Some Additives,” Egyptian Journal of Petroleum, Vol. 2, 1993, p. 1-8.
|
[21]
|
D. Feldman and A. Barbalate, “Synthetic Polymers, Technology, Properties, Applications,” Chapman & Hall, London, 1995, p. 46.
|