[1]
|
Baki Karam?s, M., and Fehmi Nair., 2008, “Effects of reinforcement particle size in MMCs on extrusion die wear”, Wear, Vol.265, pp.1741–1750.
|
[2]
|
Allison, J.E., and Cole, G.S., 1993, “Metal matrix composite in the automotive industry: opportunities and challenges”, JOM, January 1993, pp.19–24.
|
[3]
|
Jose Duarte Marafona and Arlindo Araujo, 2009, “Influence of workpiece hardness on EDM performance”, Int. J. Mach. Tool. Manu., Vol.49, pp.744–748.
|
[4]
|
Karthikeyan, R., Lakshmi Narayanan, P.R., and Naagarazan, R.S., 1999, “Mathematical modelling for electric discharge machining of aluminium–silicon carbide particulate composites”, J. Mater. Process. Tech., Vol.87, pp.59–63.
|
[5]
|
Sushant Dhar, Rajesh Purohit, Nishant Saini, Akhil Sharma and Hemath Kumar, G., 2007, “Mathematical modeling of electric discharge machining of cast Al–4Cu–6Si alloy–10 wt.% SiCp composites”, J. Mater. Process. Tech., Vol.194, pp.24–29
|
[6]
|
Lloyd, D.J., 1994, “Particle reinforced aluminum and magnesium matrix composite.” Int. Mater. Rev., Vol. 39, pp.1–23.
|
[7]
|
Surappa, M.K., and Rohatgi, P.K., 1981, “Preparation and properties of aluminium alloy ceramic particle composites”, J. Mater. Sci., Vol.16 , pp.983–993
|
[8]
|
Surappa, M.K., 2003, “Aluminium matrix composites: Challenges and opportunities”, Sadhana, Vol.28, pp.319–334.
|
[9]
|
Sornakumar, T., and Senthilkumar, A., 2008, “Machinability of bronze–alumina composite with tungsten carbide cutting tool insert”, J. Mater. Process. Tech., Vol.202, pp.402–405.
|
[10]
|
Unigovski, Ya.B., and Gutman, E.M., 1999, “Surface morphology of a die-cast Mg alloy”, Appl. Surf. Sci., Vol.153, pp.47–52
|
[11]
|
Tsoukalas, V.D., 2008, “Optimization of porosity formation in AlSi9Cu9 pressure die castings using genetic algorithm analysis”, Mater. Design, Vol.29, pp.2027–2033.
|
[12]
|
Tharumarajah, A., 2008, “Benchmarking aluminium die casting operations”, Resour. Conserv. Recy., Vol.52, pp.1185–1189.
|