Research on Application of ZigBee Technology in Flammable and Explosive Environment ()
Abstract
Wireless Sensor Network based on ZigBee technology is a wireless network which is composed of many nodes of ZigBee RF chips, sensors and MCUs, especially suitable for application of the remote monitoring system in flammable and explosive environments. This paper presents the characteristics and advantages of ZigBee technology, also discusses the system for hardware and software design. This system effectively fulfills the remote monitoring in flammable and explosive environments and posses high practical values.
Share and Cite:
Y. Li and K. Zhang, "Research on Application of ZigBee Technology in Flammable and Explosive Environment,"
Wireless Sensor Network, Vol. 2 No. 6, 2010, pp. 467-471. doi:
10.4236/wsn.2010.26058.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
J. A. Gutierrez, “Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (LR-WPANs), (IEEE Standarted for Information Technology802.15.4.),” Institute of Electrical & Electronics, 2003.
|
|
[2]
|
P. S. Neelakanta and H. Dighe, “Robust Factory Wireless Communicat Ions: A Performance Appraisal of the Bluetooth and the ZigBee Collocated on an Indust Rial Floor,” IEEE Computer Society, Vol. 3, 2003, pp. 2381-2386.
|
|
[3]
|
Chipcon, “CC2430 Preliminary Data Sheet (Rev. 1.03) SWRS036A,” Chipcon, 2005.
|
|
[4]
|
R. Reese, “A ZigBee TM-Subset/IEEE 802.15.4 TM Multiplatform Protocol Stack,” Electrical/Computer Engr MSU, 2006.
|
|
[5]
|
“ZigBee Protocol Specification,” http://www.ZigBee.org
|