Scientific Research

An Academic Publisher

Euclidean Model of Space and Time

**Author(s)**Leave a comment

KEYWORDS

1. Introduction

Albert Einstein introduced his concept of a mutual relationship between space and time known as Special Theory of Relativity (STR) in his work Zur Elektrodynamik bewegter Körper (On the Electrodynamics of Moving Bodies) [1] . This work was focused on solving then existing discrepancies between theories describing electromagnetic phenomena on one side and classical mechanics on the other. By its nature the work is physico-mathematical and the issue of geometry is addressed only marginally. This drawback of the original theory was eliminated a few years later by Hermann Minkowski’s work Die Grundgleichungen für die elektromagnetischen Vorgänge in bewegten Körpern (The Fundamental Equations for Electromagnetic Processes in Moving Bodies) [2] which was followed by his lecture from 1908 Raum und Zeit (Space and Time) [3] .

In his work, Minkowski connected space and time into one four-dimensional continuum, later called spacetime or Minkowski space, and he defined its key features. He introduced a specific pseudo-Euclidean metric for spacetime which is called Minkowski metric after the author. It is usually written in the form

${s}^{2}={c}^{2}\Delta {t}^{2}-\Delta {x}^{2}-\Delta {y}^{2}-\Delta {z}^{2}$ (1)

where Dx, Dy, Dz and Dt are coordinate increments and s is the so called spacetime interval. This interval plays the same role in Minkowski space as distance plays in ordinary Euclidean space.

Minkowski based his thoughts on Maxwell’s equations of electrodynamic field and their intrinsic symmetry, which reveals itself particularly when the equations are written with time taken as an imaginary quantity. Here the main reason for the use of imaginary numbers in Minkowski theory and subsequent introduction of the Minkowski metric can be seen. Using this metric Minkowski showed that the Lorentz transformation can be understood as a rotation of four-dimensional spacetime by an imaginary angle [2] . If a well-chosen coordinate system is used, orientation of two spatial coordinates does not change during the Lorentz transformation (they are invariant) and the transformation affects only one space-like and one time-like coordinate. E.g. if coordinate system S' moves with velocity u with respect to coordinate system S in the direction of the axis x, the transformation (rotation) affects coordinates x and t, while y and z remain invariant^{1}. In this case the transformation can be written as

${x}^{\prime}=\frac{x-ut}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ , ${y}^{\prime}=y$ , ${z}^{\prime}=z$ , ${t}^{\prime}=\frac{t-\frac{u}{{c}^{2}}x}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ (2)

where x, y, z, t are coordinates of an arbitrary point in coordinate system S and x', y', z' and t' are coordinates of the same point in coordinate system S'.

Minkowski’s geometrical interpretation of Einstein’s STR was great success. It was quickly adopted as an integral part of the theory and as such, it was not questioned for years. Moreover, Minkowski metric in generalized form known as pseudo-Riemannian metric become fundamental part of General Theory of Relativity. Some doubts regarding geometry of spacetime emerged with quantum mechanics arrival in nineteen thirties, but no real alternative was found. The problems with Minkowski concept of spacetime accumulated over years mainly in connection with attempts of quantum gravity theory. The unsatisfactory situation holds till now and it is reflected in many works of contemporary scientists [4] [5] [6] . In recent years alterations of original Minkowski concept using Finsler or Cartan geometry are proposed [7] [8] , but with no remarkable success.

For the whole time, Euclidean geometry was overlooked and relegated to auxiliary roles, mainly in pedagogical tasks as a visualization tool [9] [10] . The author is convinced it was great fault.

The aim of this work is to show that Einstein-Minkowski solution known as STR is not unique. There exists at least one other solution which corresponds to our observations, which leads to the same mathematical formulas, but which geometry is quite different. In reality, its geometry is Euclidean!

2. Assumptions and Methods

Let’s assume that physical space is Euclidean, i.e. the axioms of Euclidean geometry hold in it. Application of such an assumption on the whole universe may be difficult, but for our objectives it is sufficient to assume euclidicity of space in some local scale, that is in some restricted part of the universe sufficiently distant from mass bodies and their gravitational fields. In such a part of the universe, we can imagine existence of two inertial coordinate systems with their origins uniformly moving each other. We will denote one of these systems as S and its axes x, y, z, the other as S' with axes x', y', z'. The coordinate time of the first system will be denoted as t, the coordinate time of the other as t'. For the sake of simplicity, we shall assume that the corresponding axes of both systems are parallel and the origins O and O' of the systems coincide each other at time t = t' = 0. Motion of system S' in respect to S holds in the direction of the positive semi axis x with the speed u.

2.1. Stationary Coordinate System

In further explanation we will assume existence of one outstanding coordinate system called the stationary coordinate system. In this coordinate system the light propagates with the same speed in all directions. Such a system will be denoted as S, speed of light as c.

We will assume that in other coordinate systems that are moving with respect to S, the above claim is not fulfilled.

2.2. Time Measurement

In correspondence with Einstein, we will assume that time is measured by “ideal clocks” and all such clocks give exactly the same results, if they are not moving relative each other. Such ideal clocks could be designed also as so called light clocks which measure time on the basis of motion of light pulse between two mirrors. Such a clock clearly demonstrates the slowing-down of time flow as a consequence of speed growth. The faster the motion of the clock with respect to S the longer the light pulse trajectory in one cycle and the duration of the cycle is thus longer (see Figure 1).

2.3. Distance Measurement

Distances will be determined by means of transit times of light signals. This method assumes the light signal is emitted from point A at time ${t}_{0}^{A}$ , reflected in the

Figure 1. Light clock. Time of flight of light pulse between two mirrors depends on the state of motion of the clock. On the left―clock in rest, on the right―clock moving with velocity v to the right.

end point of measured distance (point B) and received at the initial point at time
${t}_{2}^{A}$ .^{2} The transit time is measured by an ideal clock which is placed at point A. The relevant formula is

$\Vert AB\Vert =\frac{{t}_{2}^{A}-{t}_{0}^{A}}{2}c$ (3)

2.4. Clock Synchronization

In regard to coordinate time, we will assume, in correspondence with Einstein, that in given coordinate system the time is measured by a set of mutually synchronized clocks. A method described in Einstein’s earlier cited work will be used for the clocks’ synchronization. The method uses light signals emitted off clock A at time ${t}_{0}^{A}$ , reflected at clock B at time ${t}_{1}^{B}$ and received at clock A at time ${t}_{2}^{A}$ .

The method assumes that the speed of light is the same in both directions and thus the reflection of the signal at B occurs in the middle of the time interval bounded by the signal emission and reception at A. The midpoint of the time interval is given by the formula

${t}_{1}^{A}=\frac{{t}_{2}^{A}-{t}_{0}^{A}}{2}$ (4)

Mutual synchronization of clocks will be done by setting the clock B in such a way that

${t}_{1}^{B}={t}_{1}^{A}$ (5)

The left part of Figure 2 shows synchronization of clocks that are at rest with respect to S, the right part shows synchronization of clocks located on a moving object. The results of both synchronizations are different. In terms of coordinate time t, i.e. in terms of a stationary clock, the result of “synchronization in motion” (the right part of Figure 2) is incorrect.

Figure 2. Light synchronization of clocks A and B, at the left: clock at rest, at the right: both clocks in uniform motion to the right at speed u. Light signal speed with respect to the clocks in motion is variable (motion to the right with speed c − u, motion to the left with speed c + u).

At the end of synchronization in motion, the clocks A and B will be synchronous in terms of the coordinate system rigidly coupled with the object carrying both clocks (system S') (
$\text{clock}\text{}\text{\_}\text{}{\text{shif t \u2032}}^{AB}={\text{clock\_readin g \u2032}}^{B}-{\text{clock\_readin g \u2032}}^{A}=0$ ) and time difference between events A_{1} and B_{1} is equal to zero (
$\Delta {{t}^{\prime}}^{AB}={{t}^{\prime}}_{1}^{B}-{{t}^{\prime}}_{1}^{A}=0$ ). The events are concurrent.

In terms of stationary system S the time difference of the events A_{1} and B_{1} is non-zero, it equals

$\Delta {t}^{AB}={t}_{1}^{B}-{t}_{1}^{A}=\frac{\frac{u{l}^{\prime}}{{c}^{2}}}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ (6a)

i.e. event B_{1} will occur after event A_{1}.

As regards to reading of both clocks, for stationary observer the reading of clock B will be always smaller than reading of clock A by amount

${\text{clock\_shift}}^{AB}={\text{clock\_reading}}^{B}-{\text{clock\_reading}}^{A}=-\frac{u{l}^{\prime}}{{c}^{2}}$ (6b)

Clock shift is in absolute value smaller than time difference of synchronizing events. It is result of different clocks rate. Clocks A and B moving with system S' are slower than reference clock in stationary system S (see time dilation in chapter 4.1).

In the Formulas (6a) and (6b) the length l' is the distance between clocks A and B measured in system S', i.e. in the system to which both clocks are at rest.

Violation of clock synchronization process is caused by different speeds of light on its way to B and back. In consequence the relevant transit times are not equal.

As can be seen the described method of clock synchronization can be used even in a moving system where the light propagates by different speeds in different directions, but the result of such synchronization differ from the result of synchronization in a stationary system.

2.5. Assumptions and Methods―Summary

All assumptions and methods stated above correspond with assumptions and methods of Einstein’s STR as he introduced them in his work Zur Elektrodynamik bewegter Körper [1] . Einstein even uses the idea of “stationary system” in the work, he just defines it differently―through the validity of “Newtonian equations”. In consequence both definitions of a stationary system are equivalent.

The only significant difference lies in the method of distance measurement. In his work Einstein assumes usage of rigid gauges―rods. As will be shown later (Chapter 4.6) both measuring methods, the one stated above and the Einstein’s, are equivalent and choice of the method has no influence on measurement results.

3. Euclidean Solution

3.1. 4D Space Euclidicity Postulate

The basis for following considerations as same as for the whole Euclidean Model of Space and Time (EMST) is a formula belonging to the Einstein-Minkowski solution [3]

${c}^{2}\Delta {\tau}^{2}={c}^{2}\Delta {t}^{2}-\Delta {x}^{2}-\Delta {y}^{2}-\Delta {z}^{2}$ (7)

It is a variation of (1) that is valid in the case

${c}^{2}\Delta {t}^{2}\ge \Delta {x}^{2}+\Delta {y}^{2}+\Delta {z}^{2}$ (8)

Fulfilling the inequality (8) is demanded in order for Dτ to be a real.

Equation (7) can be interpreted as a relation between an increments of coordinate time t and proper time t of a body that has moved uniformly between two points in time interval Dt, whereas coordinate differences of both points are Dx, Dy, Dz. The given formula is valid for any object regardless if it is in motion or at rest with respect to chosen coordinate system. The quantity Dt is an invariant of the Lorentz transformation as well as space-time interval s ( $s=c\Delta \tau $ ).

The Euclidean formula equivalent of (7) can be acquired by a simple rearrangement

${c}^{2}\Delta {t}^{2}=\Delta {x}^{2}+\Delta {y}^{2}+\Delta {z}^{2}+{c}^{2}\Delta {\tau}^{2}$ (9)

Formulas (7) and (9) are identical from a mathematical point of view but their geometric interpretation is different. While the Formula (7) defines the Minkowski metric
$s=c\Delta \tau $ in four-dimensional spacetime with three spatial axes x, y, z and one time-like axis ct, Formula (9) defines the Euclidean metric
$c\Delta t$ in four-dimensional space with spatial axes x, y, z and
$c\tau $ .^{3} In the Euclidean concept the quantity t is not one of space dimensions but a measure of remoteness of two points of space, i.e. the distance between them.

As will be shown further, four-dimensional Euclidean space (E_{4}) can be used as a basis of an alternative theory of space and time. On that account this space will be one of the cornerstones of EMST, its first postulate. 4D space euclidicity postulate sounds:

“Space is four-dimensional and Euclidean.”

To create a realistic theory which would comply with the mathematical aspect of Einstein’s STR it is necessary to accept two more assumptions.

3.2. 4D Speed Invariance Postulate

It can be seen from Formula (9) that no object in E_{4} can be stationary. Every object travels a distance
$c\Delta t$ during time interval Dt, i.e. almost 300,000 km in a second. This also holds for objects that are seemingly stationary or that move with distinctly sub-light velocities. Motion of such objects takes place completely, or in the vast majority, in the fourth dimension, that is along the axis
$w\equiv c\tau $ . Our (three-dimensional) senses, as well as our (three-dimensional) measuring equipment, cannot detect motion in the direction of this axis. The only way we can measure it is using a clock connected to the object. Among others, the Formula (9) expresses a known relativistic fact that the larger the change of spatial coordinates x, y and z in time interval Dt (or more commonly said the faster the object is moving) the slower the flow of its proper time t.

Denotations “4D motion”, “4D speed^{4}” etc. will be used in the following text to distinguish motion in E_{4} from motion in ordinary three-dimensional space (E_{3}).

A new postulate as a replacement for Einstein’s speed of light invariance postulate can be formulated with the use of 4D speed. This postulate is directly derived from Formula (9). 4D speed invariance postulate states:

“In a stationary coordinate system all objects move with the same 4D speed that is equal to the speed of light c.”

It should be noted that the postulate refers to the stationary system only, i.e. to the system in which the speed of light is invariable and equal to c. This postulate is an enhanced version of Einstein’s speed of light invariance postulate that states: “Every ray of light moves in the stationary system with the same speed c, the speed being independent of the condition whether this ray of light is emitted by a body at rest or in motion” [1] .

According to the 4D speed invariance postulate all objects travel the same distance during time interval Dt. Various cases for objects moving from point 0 at different speeds v are displayed in Figure 3.

3.3. Fourth Spatial Dimension Boundedness Postulate

The second assumption necessary for acceptance of E_{4} space as a basis for the new model of space and time is the assumption of its limited width, or more

Figure 3. Uniform motion of objects launched from point 0. At the end of time interval Dt, the objects are located on the surface of a four-dimensional hemisphere with radius r = c Dt. It is a hemisphere due to the fact that increments of coordinate cτ cannot be negative. Motion of objects in plane x - cτ is plotted here. Speed of an object can also be expressed by an angle a: $\mathrm{sin}\alpha =\frac{\Delta x}{c\Delta t}=\frac{v}{c}$ .

accurately limited usable width in the direction of the fourth spatial axis $w\equiv c\tau $ . Firstly I will clarify the reasons.

Experience teaches us that two object are in collision if these occupy the same point of space at the same time. In ordinary three-dimensional space it corresponds to an equality of spatial coordinates x, y, z and time value t. In a four-dimensional space it would be natural to expect equality of all four spatial coordinates with coordinate $w\equiv c\tau $ among them. It can be shown, though, that in real world the collisions occur entirely independently of the value of $w\equiv c\tau $ .

Let us have objects A and B that are both stationary in the system S. From object A light signal L was emitted towards object B, it was reflected there and has returned back to A. On its way to B and back the light signal traveled a distance

of 2||AB|| in time $\Delta {t}_{AA}=\frac{2\Vert AB\Vert}{c}$ . During this time the object A hasn’t changed

its “three-dimensional” position, thus
$\Delta {x}_{A}=\Delta {y}_{A}=\Delta {z}_{A}=0$ and according to Formula (9) holds that
${c}^{2}\Delta {t}_{AA}^{2}={c}^{2}\Delta {\tau}_{A}^{2}$ or
$c\Delta {\tau}_{A}=c\Delta {t}_{AA}$ . An increment of the fourth spatial coordinate c Dτ_{A} of object A is equal to time Dt_{AA} multiplied by speed of light c. On the contrary the light signal L travels the distance cDt_{AA} in time Dt_{AA} and from Formula (9) it is clear that the increment of its fourth spatial coordinate equals zero (cDτ_{L} = 0). If the light signal was emitted from object A at a point with coordinates x_{A}, y_{A}, z_{A}, cτ_{A} then the instant of return had coordinates x_{A}, y_{A}, z_{A},
$c\left({\tau}_{A}+\Delta {\tau}_{A}\right)$ . On the other hand, for the light signal itself, its proper time has not flown (Dτ_{L} = 0), its coordinate
$w\equiv c\tau $ had not changed and after its return it had its initial coordinates x_{A}, y_{A}, z_{A}, cτ_{A}. In terms of four-dimensional space, the light signal has returned to the initial point, but object A is no longer present here. Thus the collision, i.e. the interception of the light signal by the object A, should not take place. Physical reality, though, is different.

Another example is shown in Figure 4. It shows two objects that went forward from points A and B one against each other at the same time t_{A} = t_{B}. The two objects move with different speeds. In case we plot their trajectories in plane

Figure 4. Plot of collision of two objects, at the top: in plane x - cτ, at the bottom: in case of existence of barriers.

x - cτ we will see that they intersect at point C. However this point will not be the place of their collision because they will not be present there simultaneously. 4D distances ||AC|| = cDt_{AC} and ||BC|| = cDt_{BC} are different which means that also the times Dt_{AC} and Dt_{BC} are different. In fact the two objects collide at point D which corresponds to two separate points D_{1} and D_{2} in plane x - cτ. 4D distances ||AD_{2}|| = cDt_{AD} and ||BD_{1}|| = cDt_{BD} are equal in this case, which means that both objects will occupy point D at the same time.

In order to explain such a strange feature of space, following assumption has to be adopted, fourth spatial dimension boundedness postulate:

“Material objects are in the fourth spatial dimension limited to narrow allotted region. This region is common for all material objects and does not provide enough room for their mutual passing.”

This means, that the space and (elementary) particles of matter are four-dimensional but some forces or barriers keep them in a narrow strip of the space. The dedicated strip is very narrow, so the particles are unable to pass each other in the fourth dimension without mutual interaction. Only three remaining spatial dimensions are applicable. For the sake of completeness we should add that, due to the concentration of all matter particles in a narrow strip of four-dimensional space, all composite objects have one dimension significantly smaller than the others. Thus, even though composed of four-dimensional particles, these objects exhibit only three-dimensional properties.

There certainly exists some physical explanation for the above mentioned behavior of particles but it is unknown to the author at this time. For further explanation, such behavior of particles in 4D space will be thought as basic fact, and as such it is not to be discussed or investigated any further. Instead, we will focus on finding of appropriate geometrical model of particles motion.

3.4. Geometric Interpretation of 4D Motion

Let us create geometrical model of motion of matter particles in space E_{4}. Basis for our considerations will be three aforementioned postulates complemented by five assumptions that can be considered natural:

1) It holds direct proportion between particle’s 4D path increment and coordinate time Dt increment expressed by Formula (9).

2) 4D speed of any particle is constant in time and is equal to c.

3) Allotted region of space E_{4}, where all particles are situated, is too narrow in the direction of fourth spatial dimension
$w\equiv c\tau $ to observe this dimension in macroscopic experiments.

4) 4D trajectory of any particle is continuous, i.e. without gaps or jumps.

5) Particles obey laws of conservation of energy, momentum and mass.

Direct consequence of assumption 5 is:

6) Direction of a particle’s 4D motion is changing only when it is in the interaction with force field, with other particle or with boundary of E_{4} space region. In other cases, the trajectory is straight.

Let us describe 4D motion of a particle in uniform subluminal motion. For such motion holds:

7) Projection of the particle’s 4D speed onto our ordinary three dimensional space (E_{3}) is ordinary (3D) speed v which is constant in time and less than c.

8) Projection of the particle’s 4D trajectory onto E_{3} is a straight line.

Using statements 1, 2 and 7 it can be stated:

9) 4D velocity component in direction of $w\equiv c\tau $ is non-zero and its absolute value is constant in time.

In combination with statements 3 and 4 we acquire:

10) Due the fact that allotted region is narrow in direction of $w\equiv c\tau $ , the particle is experiencing oscillating motion. The sign of velocity component in this direction is changing in time.

And finally from statements 6 and 10:

11) Direction of 4D motion is changing only on the boundaries of E_{4}, the change is abrupt a it affects only sign of the 4D velocity component in the direction of
$w\equiv c\tau $ .

The above findings mean that 4D trajectory of uniformly moving particle

− is restricted to the allotted region of E_{4},

− is situated in a plane given by the direction of particle’s 3D motion and parallel with axis $w\equiv c\tau $ ,

− is composed of straight, mutually connected lines,

− its vertices rest on the barriers bounding allotted region of E_{4},

− its straight lines form equal angle a with the axis $w\equiv c\tau $ , the angle is given by speed v of the particle ( $\mathrm{sin}\alpha =\frac{v}{c}$ ).

Such form of motion is shown on the lower part of Figure 4.

Definition:

Let us have a space E_{4} containing two distinct three-dimensional hyperplanes perpendicular to the axis
$w\equiv c\tau $ . These hyperplanes will be called “barriers”, their distance labeled
$\stackrel{\xaf}{w}$ (
$\stackrel{\xaf}{w}={w}_{\mathrm{max}}-{w}_{\mathrm{min}}$ ). Subset of E_{4} bounded by both barriers will be called space E_{4}-B (letter B for “bounded”).

Ones again, let us gather geometrical model of motion of a particle in uniform motion.

We have space E_{4}-B in which particles of matter are moving by speed of light. Trajectory of each particle is continuous and is composed of straight lines. Each line forms an angle a with axis
$w\equiv c\tau $ proportional to the speed v of the particle. Motion of the particles in the direction of three spatial coordinates (x, y, z) is considered as unrestricted, while in the fourth dimension
$w\equiv c\tau $ is limited by existence of two barriers perpendicular to the fourth spatial axis
$w\equiv c\tau $ . All particles of matter are located between these barriers that constitute fixed boundaries of their motion in the fourth dimension. The distance
$\stackrel{\xaf}{w}$ of the barriers is constant, independent of the type of the particles, time and position in space. As an inevitable consequence of laws of momentum, energy and mass conservation, collisions of particles with the barriers are ideally elastic, particles maintain their kinetic energy (i.e. both speed and mass), 3D direction of motion and angles of incidence to the barriers are equal to angles of reflection. Motion of particles in the fourth dimension has oscillatory nature. This oscillatory motion is performed by individual elementary particles, not by objects as a whole.

Described geometrical model could also hold particles in arbitrary accelerated motion. It is sufficient to drop some demands on particle’s trajectory as a result, the 3D motion of particle is now no more uniform. 4D trajectory will now be composed of lines which are no necessary straight, lay in one plane nor form constant angle with $w\equiv c\tau $ .

3.5. Fourth Spatial Coordinate

In further explanation I shall distinguish between the value of coordinate
$w\equiv c\tau $ and the actual position of an elementary particle within E_{4}-B. The later will be marked as w_{B}. While coordinate w_{B} is changing in a narrow range between w_{min} and w_{max} in a cyclic manner, coordinate
$w\equiv c\tau $ grows with every cycle by value of 2(w_{max} − w_{min}) (Figure 5). We have no means of measuring coordinate w_{B} directly but by using a clock we can measure increments of
$w\equiv c\tau $ .

Both variants of fourth spatial coordinate w_{B} and
$w\equiv c\tau $ have their theoretical importance. On one side coordinate w_{B} gives the position of elementary particles in the space between barriers, on the other side coordinate
$w\equiv c\tau $ connects motion of particles with time. In terms of further explanation, there is an important fact that quantity
$w\equiv c\tau $ is not cyclic and thus it is suitable for plotting of diagrams of object’s motion. Such a diagram does not correspond to the real motion of particles in 4D space but it is much more descriptive than a plot of a trajectory with numberless reflections from the barriers. A comparison of the “real” motion between the barriers with a plot of “fictitious” motion in plane x - cτ can be seen on Figure 4 and Figure 5.

A diagram with axes x and $w\equiv c\tau $ is an analogy of the commonly known Minkowski diagram. The main difference between them is that the coordinate time t is not one of the coordinates in the x - cτ diagram but a length of a trajectory. The x - cτ diagram also allows the display of the proper time τ which is not possible in the Minkowski diagram.

Figure 5. Two variants of plots of a particle motion in 4D space―bold: “real” motion between the barriers, dashed: “fictitious” motion in plane x - cτ.

3.6. Geometric Interpretation of Time

We have described important features of E_{4}-B space as well as nature of the motion in it. Now, let us turn our attention to the proper time. Proper time can be defined as an increment in coordinate
$w\equiv c\tau $ divided by speed c.

On the other hand, the proper time does not have to be understood solely as a distance divided by speed; there also exists an alternate view. As a natural measure of time flow, the number of reflections of selected elementary particle from the barriers can be chosen. The faster the particle is reflecting, the faster the time is passing. Matter itself measures its time―each particle of matter is a ticking clock. There is a direct proportion between the number of reflections of a particle n and a length of the corresponding time interval Dτ. The proportion is given by formula

$c\Delta \tau =n\left({w}_{\mathrm{max}}-{w}_{\mathrm{min}}\right)=n\stackrel{\xaf}{w}$ (10)

4. Geometric Basis of Relativistic Phenomena

In the previous chapter we have introduced E_{4}-B space as a replacement for pseudo-Euclidean spacetime used in Einstein’s STR. In this chapter we shall demonstrate the geometric basis of the Lorentz transformation and known relativistic phenomena of time dilation and length contraction.

4.1. Time Dilation

As stated in the previous chapter the particles oscillate in a narrow strip of E_{4} space confined by a couple of parallel barriers. According to the 4D speed invariance postulate the particles move with 4D speed c in a stationary system S. Such motion of particles is in principle identical with the motion of light in a so called light clock. We have two parallel reflective surfaces and a particle moving with the speed of light between them. The rate of the flow of time is given by number of reflections of the particle from the reflective surfaces. The faster the motion of such a clock in S is, the longer the path of the particle between reflections and the slower the oscillation. The 4D path c Dt of a particle drifting together with such a clock at speed v is given by
${c}^{2}\Delta {t}^{2}={v}^{2}\Delta {t}^{2}+{c}^{2}\Delta {\tau}^{2}$ (Figure 6). Hence

$\Delta \tau =\Delta t\sqrt{1-\frac{{v}^{2}}{{c}^{2}}}$ (11)

The formula shows that the time interval Dτ measured by a “particle clock” in motion will be smaller than the corresponding Dτ interval measured by a reference “particle clock” at rest.

The above effect affects all particles of a moving object i.e. every particle of the object behaves as a light clock. There is no difference between behavior of the matter and light in this respect.

Time behaves the same as a particle clock or light clock. This results from the direct proportion between Dτ and the number of oscillations of a particle (see the end of previous chapter). If motion of an object is slowing down oscillations of all its elementary particles, it signifies time itself is slowing down. Thus all clocks on a moving object are slowed down in their operation, no matter their construction.

4.2. Transformation of Light Wavefront

Now we shall look at the transformation of space. A geometric model of the reflection of light from an inner surface of an ellipsoid or sphere will be used for this purpose. Such a pair of bodies was chosen because a moving ellipsoid and a stationary sphere are equivalent bodies in terms of STR―they differ only due the length contraction in the direction of the body’s motion.

Let us have a flattened rotational ellipsoid e' moving in stationary system S with velocity u (Figure 7). Semi axis in the direction of motion shall be denoted as d, semi axis in the transverse direction as b. The two semi axes satisfy the

condition $d=b\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}$ . The shortening of semi axis d is chosen in such a way

that it corresponds to the Lorentz-FitzGerald contraction. It can be verified using

Figure 6. Particle clock. Left: stationary clock, right: clock moving with velocity v.

Figure 7. A view of light reflection in a moving flattened ellipsoid e' as seen in a stationary system S. Light emitted simultaneously from point F_{−1} successively reflects from the ellipsoid: the first reflection occurs at point A, then the points of reflection gradually move to the right―towards point C and further to point B. The reflected light reaches point F_{1} from all directions simultaneously. The geometric set of all points of reflection is a prolonged ellipsoid e with foci F_{−1} and F_{1}.

the Lorentz transformation that in the view of system S' connected with the ellipsoid, it appears as a stationary sphere k with radius b.

Let us assume, that in the center of a moving ellipsoid (point F_{−}_{1}) there is a flash of light at an arbitrary time t. The light spreads in all directions, strikes the inner mirror-like surface of the ellipsoid and reflects. The light propagates with speed c in respect to S and the ellipsoid itself is moving as well. The question is which points of S are points of light reflection and where the reflected light is heading.

It can be proved that points of light reflection from e' form a prolonged rotational ellipsoid e with semi axes a (in the direction of motion) and b (in transverse direction). The semi axis b is identical to that of a flattened ellipsoid e'. The following formulas hold for the semi axis a and eccentricity e:

$a=\frac{b}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ , $e=\sqrt{{a}^{2}-{b}^{2}}=\frac{\frac{ub}{c}}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$

Point F_{−1} is one of the foci of the ellipsoid e. According to a known property of conic sections the reflected light will be directed to the other focus F_{1} while its trajectory will be equal to 2a regardless of the place of reflection. Assuming the speed of light doesn’t change due to the reflection (which corresponds with the 4D speed invariance postulate) all of the reflected light will reach focus F_{1} simultaneously. The transit time will be

$\Delta t=\frac{2a}{c}=\frac{\frac{2b}{c}}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}=\frac{2e}{u}$ (12)

The formula shows that the transit time is also the time in which center of the flattened ellipsoid e' relocates from focus F_{−1} to focus F_{1} (distance of the foci is 2e). That has consequences of great importance.

If an observer in system S sees the light being emitted and received in different points of space (points F_{−1} and F_{1}) and if he is aware that reflections of light off ellipsoid e' take place successively, an observer, located in center of e' and moving with it, sees the situation differently. He witnessed the light being sent in all directions simultaneously and returning from all directions to the initial point! From his point of view, it holds
${F}_{-1}\equiv {F}_{1}$ . Furthermore, if he assumes the speed of light is independent of the direction, i.e.
$c=\text{const}\text{.}$ , he inevitably reaches a conclusion that the reflection of light took place on a spherical surface and point
${F}_{-1}\equiv {F}_{1}$ is in its center.

The radius of the sphere can be determined by the observer from the transit time. It holds $2r=c\Delta {t}^{\prime}$ where Dt' is time interval measured in moving system S'. This is measured using a clock moving with the system. According to (11) it applies:

$\Delta {t}^{\prime}=\Delta \tau =\Delta t\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}$ (13)

If Dt from Formula (12) is substituted we obtain

$\Delta {t}^{\prime}=\frac{\frac{2b}{c}}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}=\frac{2b}{c}$ (14)

and thus $2r=c\frac{2b}{c}$ or r = b (Figure 8).

The geometrical model described here leads to the same results as the Lorentz transformation (call to mind the choice of parameters of the flattened ellipsoid above). The moving flattened ellipsoid e' has transformed into a stationary sphere k due to change of reference systems. The model is all-Euclidean (contrary to the Einstein-Minkowski solution), i.e. all used formulas were derived using the property of Euclidean space.

4.3. Geometric Basis of Lorentz Transformation

Using this model, let’s try to understand a geometric basis of the Lorentz transformation.

Firstly we have to notice that only one dimension of a body is changing during the transformation. The changed dimension is the one in the direction of the x axis, i.e. in the direction of motion. The remaining spatial coordinates y and z, as

Figure 8. Reflection of light in a moving flattened ellipsoid e′ as seen from system S′ moving with the ellipsoid. The observer is not aware that in his system the speed of light is not constant and thus interprets synchronous return of light to initial point ${F}_{-1}\equiv {F}_{1}$ as proof that the reflective surface has shape of sphere k with its center at point ${F}_{-1}\equiv {F}_{1}$ .

well as proper time τ, is not changing. These coordinates perpendicular to the direction of the motion are invariants of the transformation. Therefore, the Lorentz transformation can be written in a modified form

${x}^{\prime}=\frac{x-ut}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ , ${y}^{\prime}=y$ , ${z}^{\prime}=z$ , $c{\tau}^{\prime}=c\tau $ (15)

The discussion whether the formula for coordinate time

${t}^{\prime}=\frac{t-\frac{u}{{c}^{2}}x}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ (16)

is a linear combination of formulas stated above or a separate fifth equation shall be left for later (chapter 6.3).

It remains to explain how it is possible that the length of a moving object in Euclidean space is changing. The answer is composed of two parts.

One reason is the different view on the simultaneity of non-coincidental events. Events simultaneous in terms of system S are not necessarily simultaneous in terms of another system (see the method of synchronization of non-coincidental clocks, chapter 2.4). It is easy to show that a flattened ellipsoid changes its appearance in conjunction with a change of simultaneity definition (Figure 9).

1) In the first case, we will determine simultaneity by means of stationary clocks. The procedure could be as follows―in a pre-selected time t we mark the position of the leading (B) and trailing (A) point of the ellipsoid on the x axis of

Figure 9. Determination of length of moving ellipsoid. At the instant of coincidence of points $A\equiv {A}^{\prime}$ the other terminal point of the ellipsoid can be either in point B'―if simultaneity is defined using coordinate time of stationary system S―or in point B―if simultaneity is defined using coordinate time of moving system S'.

stationary system S. The difference in x coordinates gives us its length in the direction of motion. We can see that the ellipsoid is flattened, i.e. its length is smaller than the transverse dimension.

2) In the second case, we use reflections of light from the ellipsoidal surface for simultaneity definition. The reflections are simultaneous in terms of system S' (reflections of light can be used for synchronization of a non-coincidental clock in S'). In case we mark position of the beginning and the end of the ellipsoid on the x axis in the moment of the light reflection, we can see that the ellipsoid is prolonged, i.e. its length is larger than the transverse dimension.

The reason for such contradictory results is the fact that in terms of S the light reflects on the trailing point (A) of the ellipsoid sooner than on the leading one (B).

It has to be pointed out that both methods of ellipsoid length determination are correct. In both cases, we have marked positions of both terminal points of the ellipsoid simultaneously. In the first case the simultaneity was in respect to system S, in the second in respect to system S'.

It is explained in the above text that, due to the method of synchronization used, the flattened ellipsoid in motion looks as if it were a prolonged one. But the text does not explain, however, why the ellipsoid appears to be a sphere to an observer in S'.

Thus we get to the second part of the answer. This is related to the speed of light in a moving system. As stated in 2) the reflections from the surface of a prolonged ellipsoid are simultaneous in terms of S'. This can only be explained as the front of the light wave in S' propagates in the direction of axis x faster than in other directions. To be more accurate―in a moving system the front of the light wave has the form of a prolonged ellipsoid with a larger semi axis oriented in the direction of the system motion. The center of such ellipsoid is moving along with the system S'. The speed of light in the direction of motion can be determined by combination of Formulas (13) and (12)

${c}_{x}=\frac{2a}{\Delta {t}^{\prime}}=\frac{c\Delta t}{\Delta t\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}=\frac{c}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ (17)

as well as the speed of light in the perpendicular direction

${c}_{y}=\frac{2b}{\Delta {t}^{\prime}}=c$ (18)

The ratio of both velocities is
$1:\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}$ . Notice that c_{x} is larger than the 1

speed of light in a stationary system. This is caused by clock deceleration in a moving system.

Thus the light in a moving system behaves differently than in a stationary system. Let’s assume that an observer in system S' is not aware of the dependency of speed of light on the direction of its propagation. Due to the assumption of invariable value of c he will consider the simultaneity of reflections from the body to be a proof of its spherical shape. Such a claim will be supported by the fact that the light reflects back to the point of its emission.

The second part of the mystery of transformation of a flattened ellipsoid into a sphere is thus connected to the non-constant speed of light in a moving system. If we look at the parameters of ellipsoid e, we will see that the ratio of its longer

semi axis to the semi axis in perpendicular direction is $1:\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}$ which is

equal to the ratio of the speed of light in direction of the longer semi axis and the speed in a perpendicular direction. Both effects fully compensate each other and they are thus undetectable by any measurement in S'. So nothing prevents an observer in S’ from accepting the assumption that the speed of light is constant in all directions.

From a mathematical point of view the transition between the prolonged ellipsoid and a sphere is solved by changing the length scale of axis x. The unit of

length on axis x' will be chosen $\frac{1}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ times larger than on axis x. This new

unit of axis x' assures that the speed of light in S' is direction independent and the prolonged ellipsoid e transforms in sphere k. From a geometrical point of view space undergoes an affine transformation.

Note: The statement given above that in a moving system the light doesn’t propagate with the same velocity in all directions is related to the usage of time t’ from the moving system and simultaneous usage of length scale of axis from a stationary system. In the case of usage of corresponding quantities (times and scales) the effect disappears. So it is undetectable in physical experiments.

4.4. Transformation of Motion of Mass Objects

So far we have demonstrated that using the light an observer in S' cannot detect that the lengths and the entire space are affine deformed in his coordinate system. In other words, he cannot detect that the body from which the light reflects is not a sphere but an ellipsoid. It remains to be shown that affine deformation of a moving system cannot be detected by other types of measurements as well.

Let us investigate length measurements based on measurements of transit times of mass objects moving with speeds smaller than that of light. These objects will behave the same way as light (with an exception of the speed of propagation)―their motion will be uniform and their reflections ideally elastic. We can imagine them as idealized tennis balls.

Our current model of sphere/ellipsoid has to be expanded by adding a fourth dimension $w\equiv c\tau $ . The reason is simple: so far we have modeled propagation of light. Light moves at speed c and proper time doesn’t flow for it. Now we will explore slower motions and the cτ coordinate will acquire non-zero values.

Three-dimensional bodies―a sphere and ellipsoid―will be replaced by their four-dimensional variants. However, these will differ relatively little from their three-dimensional relatives. E.g. a four-dimensional flattened ellipsoid has four semi axes from which the one oriented in the direction of motion is the shortest; the remaining three are equal each other. Thus to describe the ellipsoid, it is enough to know the length of its two semi axes―the semi axis d in the direction of motion and the semi axis b in perpendicular direction. These quantities are the same as those used to describe the three-dimensional variant of this ellipsoid. We retain unchanged labeling also for the quantities of a prolonged ellipsoid (semi axes a and b) and a sphere (radius r).

We cannot imagine given bodies as a whole. Regarding further explanation, it is not a major drawback though. It suffices to neglect one of the dimensions of the four-dimensional ellipsoid and it becomes an ordinary three-dimensional ellipsoid; if we omit two dimensions, we get a two-dimensional section of the ellipsoid.

Such a section will suffice for further explanation, because we will study uniform motions only. Applied to moving bodies such as a sphere or ellipsoid, the plane of the section will always be chosen in such a way that it includes the center of the body and the direction of its motion―the axis x. As a result of rotational symmetry all sections of this type are similar―i.e. the shape of the section is independent of the choice of its second dimension; it could be either y, z, cτ or any other direction perpendicular to the direction of motion.

Let us conduct an experiment: Tennis balls were launched from a point that does not move with respect to S. Each one of them moves in a different direction and different speed. In the direction of motion of each ball a solid reflective panel is positioned perpendicularly to this direction, so the ball is reflected back to the launch point.

The distances of reflective panels from the launch point are set so that all balls return to the launch point at the same time. Let us suppose that in free space the balls move uniformly and reflections do not alter their kinetic energy and thus their speed. Now it is certain that reflections of all balls happen simultaneously, i.e. times of flight there and back are equal. Using the 4D speed invariance postulate we determine that equal transit time Dt means that the 4D paths of all balls must be equal as well. In the moment of reflection all balls are located on the

surface of the four-dimensional hemisphere with radius $r=c\frac{\Delta t}{2}$ (see Figure 3).

Note: Mentioned hemisphere is of course a mere fiction as well as coordinate $w\equiv c\tau $ . As a consequence of reflections from the barriers the motion of balls won’t be straight and the hemisphere will transform into a narrow object squeezed between the barriers limiting motion in the fourth dimension. Increments of coordinates x, y, z and $w\equiv c\tau $ as well as the 4D paths of any objects will not be affected by this transformation though.

Now let us place an unchanged device with the experiment so that it is in rest in moving system S'. In terms of S it will be shortened in the direction of its motion (in correspondence with Lorentz transformations). The ratio of the new and

original length will be $\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}:1$ .

If we repeat the experiment described above, an observer in S' will see it identically as an observer in S had before. All reflections will be simultaneous in respect to S' as well as return of balls to the launch point. The observer will be able to verify simultaneity of reflections by means of clocks placed at the reflective panels and synchronized using the light. He will not detect any deviation.

The observer in S, though, will see the course of the experiment differently. From his point of view, the points of launch and reception of balls will not be the same. Also times of reflections of balls will differ. On the other hand, he will not question the fact that all balls were launched simultaneously and they also return simultaneously. Using the 4D speed invariance postulate he will determine that all balls travel the same 4D distance. Because they were launched from one point and after reflection returned to another one, he will easily determine that all points of reflection must be located on the surface of a prolonged four-dimensional ellipsoid. The points of launch and reception of balls are the foci of this ellipsoid (or semi ellipsoid, if increments of coordinate $w\equiv c\tau $ on the way to the reflective panels will be regarded as positive and on the way back as negative).

Parameters of the ellipsoid can be determined from the balls’ travel time. For a longer semi axis applies $2a=c\Delta t$ , for eccentricity $2e=u\Delta t$ . Given values can be compared to parameters of the prolonged ellipsoid e created by reflections of light―see Formula (12). They are identical!

4.5. Analogy between Motion of Mass Objects and Motion of Light

We have found that results of experiments modeling motion of light and balls do not differ. What is the implication?

Just the same way we have described motion of light in the sphere/ellipsoid model by means of three interchangeable bodies―flattened ellipsoid, prolonged ellipsoid and sphere, we can describe motion of balls. The only difference is usage of a four-dimensional variant of the bodies. We have a moving flattened

ellipsoid with semi axes $d=b\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}$ and b representing a moving device with

the experiment, sphere of radius r = b moving with S' representing a set of reflection points of balls as they appear to an observer in S', and a prolonged ellip-

soid with semi axes $a=\frac{b}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ and b representing a set of reflection points as they appear to an observer in S.

Correspondence of all parameters of given bodies has a simple explanation, it is result of equivalence of both types of motion. Whether we use the light moving with speed c or tennis balls moving considerably slower, the 4D path is always the same ${d}_{4D}=2a=c\Delta t$ . The only thing it changes is its projection to the three-dimensional space.

If we plot motion of a light beam and a ball in corresponding cross-sections of a four-dimensional ellipsoid we get two variants of the same picture (Figure 10). The only difference is one axis label.

Figure 10. Trajectory of beams of light inside an ellipsoid (at the top) and trajectory of a ball launched along the x-axis (at the bottom). The plots differ only in the plane in which the motion takes place. Plot of a trajectory of a ball launched in random direction and speed would differ only in the plane of motion.

Partial conclusion: Results of length measurements based on measurements of moving objects’ (photons, balls, ...) transit times transforms in compliance with Lorentz transformation. They do not depend on the speed of the objects used for length measurement. If the simultaneity of light reception in the sphere/ellipsoid model led us to the change of the axis x' length scale, results of all other length measurements based on objects motion will lead us the same way.

4.6. Contraction of Rigid Rods

Only one hope remains for determination of real undeformed dimensions of a moving body. That is measurement by means of rigid measuring rods. With their help, is it possible to reveal that what seems to be a sphere, is a flatten ellipsoid in reality?

We must reply: no. The shape and dimensions of rigid bodies are given by forces acting between individual particles of mass. These particles are not in direct contact and thus action at a distance is responsible. Strong and weak nuclear interactions act in the atomic nuclei, electromagnetic force between nuclei and electrons shells as well as between adjacent atoms, and all is complemented by gravitational force. All these interactions are, according to modern theories, mediated by exchange of mass particles (mesons, leptons, photons, gravitons). These particles are in permanent motion and their interactions keep the dimensions of rigid bodies unchanged.

How would the distance of two adjoining ions in a crystal lattice be affected by motion of the whole body? Will it remain unchanged? On the basis of the tennis balls experiment we must say no. The particles mediating interactions are only “tennis balls”, in their nature, i.e. objects moving there and back with any speed less or equal to the speed of light. Thus during the motion of objects in S the distances between adjoining ions (atoms, molecules, nucleons, ...) are shortened. Such shortening will have the same ratio in which the sphere moving in S had to be shortened, so that it still appeared to be a sphere in view of S'. Shortening of distances between ions in a crystal lattice will inevitably lead to the shortening of the whole body. This shortening occurs only in the direction of the motion and the shortening is real. A similar explanation of length contraction was suggested by Lorentz in his work Electromagnetic phenomena in a system moving with any velocity smaller than that of light [11] .

It remains to add the obvious―the same reason will cause that all bodies, not just measuring rods, will be deformed the same way. The phenomenon also affects liquids and gases which will change their volume.

5. Equivalence of Coordinate Systems

Let’s review conclusions concerning deformation of bodies and coordinate systems:

1) By means of observations in a moving system we cannot detect shortening of bodies which are stationary in this system. The bodies and measuring rods are equally shortened which gives an impression that nothing is shortened.

2) As a result of length deformation of all measuring devices in moving coordinate system S’ a different length unit is used on axis x’ than on the remaining axes. Thus the coordinate system S’ is affine deformed relative to the system S. Affine deformation affects not only lengths but also angles which is why the deformation doesn’t reveal itself by any measurement inside the moving system. It can be detected only if we compare results of measurements in two systems that are moving each other.

3) Use of an affine deformed coordinate system prevents us from detection of the directional dependence of speed the light propagates with. Variations in the speed are fully compensated by deformations of rigid rods (compare Michelson-Morley experiment) as well as the coordinate system itself. The speed of light in a moving system appears to be identical in all directions and it is equal to the speed of light in a stationary system.

The above implies that no observation inside a moving system can detect its motion. Neither speed, direction nor any other sign of motion can be detected. This theoretical fact is supported by results of countless experiments and it stood at the birth of Einstein’s STR. Thus in the real world the stationary coordinate system cannot be distinguished from the others.

5.1. Relativistic Effects as a Result of Partial Geometric-Kinematic Phenomena

Relativistic geometric effects (Lorentz transformation, length contraction, time dilation, ...) are products of composite action of five fractional, relatively independent phenomena:

1) Galileo transformation. This is a transformation between two coordinate systems in Euclidean space. It solves transition from the stationary to a moving coordinate system without considering relativistic effects. Its equations are

${x}^{\prime}=x-ut$ , ${y}^{\prime}=y$ , ${z}^{\prime}=z$ , ${t}^{\prime}=t$ (19)

2) Time dilation. The dilation of time causes a slowing down of clocks in a moving system. The cause for this slowing was explained in chapter 4.1.

3) Rigid bodies contraction. As a result of this phenomenon a real shortening of bodies in the direction of their motion takes place. The degree of this effect depends on their speed in respect to the stationary system S. The shortening is in

the ratio $\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}:1$ and its cause is described in the chapter 4.6.

4) Different understanding of simultaneity of events. As a result of a different outcome of clock synchronization in a moving system and in the stationary system the results of length measurements differ in these two systems. If clocks from a moving system are used all bodies seem longer in the direction of their motion than in case of use of clocks from the stationary system. Prolongation is

in the ratio $1:\left(1-\frac{{u}^{2}}{{c}^{2}}\right)$ .

5) Affine deformation of moving coordinate systems. A change in the scale of axis x' causes an apparent shortening of bodies in the direction of their motion

in the ratio $\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}:1$ .

The partial phenomena described above are of a geometric or geometric-kinematic nature. This nature is known for all of these phenomena for a long time, but it is not widely accepted in the case of two of them. This concerns items 2) and 3).

In particular situations not all of these phenomena have to participate. E.g. in the Lorentz transformation only phenomena 1), 2), 4) and 5) take effect, whereas the explanation why the length of a body, in terms of a coordinate system rigidly coupled with it, does not change after acceleration is caused by the interaction of phenomena 3), 4) and 5).

5.2. Relativity of Relativistic Effects

As is known, all relativistic effects are relative, i.e. they occur as a result of a relative motion of one system against another. Their significant feature is this: in the case of an interchange of the reference and observed system the nature of observed phenomena does not change. E.g. if clock A in motion in S is slower than clock 0 stationary in this system it must identically apply that clock 0 in motion in S’ will be slower than clock A stationary in this system. Einstein’s STR has postulated this relativity of phenomena; for the Euclidean model it is necessary to prove it.

Let us have a clock 0 located at the initial point (x^{0} = 0) of a stationary system S and a pair of clocks A (x'^{A} = 0) and B (x'^{B} = b') in a moving system S'. System S' moves in the direction of the positive semi axis x with speed u so that at first clock B and then clock A will pass the stationary clock 0 (Figure 11). In the experiment we shall try to compare coordinate time of the moving system S' (materialized by clocks A and B) with the time measured by stationary clock 0. In further explanation I will judge time differences and simultaneity of events from the viewpoint of stationary system S.

Clocks A and B are stationary in the system S' and they are mutually synchronized in this system as well ( ${\text{clock\_shif t \u2032}}^{AB}=0$ ). Shift of the clocks from the

viewpoint of system S should be according to (6b) ${\text{clock\_shift}}^{AB}=-\frac{u{b}^{\prime}}{{c}^{2}}$ (the reading of clock B is smaller than the reading of clock A).

In the instant of the passing of clock A by clock 0 (event “0A”) the time on both clocks is equal to zero ${\text{clock\_reading}}_{0A}^{0}=0$ , ${\text{clock\_reading}}_{0A}^{A}=0$ . The

time of clock B is smaller than the time of clock A, i.e. ${\text{clock\_reading}}_{0A}^{B}=-\frac{u{b}^{\prime}}{{c}^{2}}$ .

Once before, clock B passed clock 0 (event “0B”). Clock 0, stationary in S

showed at that time less by $\frac{b}{u}=\frac{{b}^{\prime}\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}{u}$ , clock A and B stationary in S’

Figure 11. Motion of clocks A and B along with the system S'. Left: instant of mutual passing of clocks B and 0, right: instant of mutual passing of clocks A and 0.

showed less by $\frac{{b}^{\prime}\left(1-\frac{{u}^{2}}{{c}^{2}}\right)}{u}$ (they are slower).

Thus clock 0 showed time ${\text{clock\_reading}}_{0B}^{0}=-\frac{{b}^{\prime}\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}{u}$ , clock A time ${\text{clock\_reading}}_{0B}^{A}=-\frac{{b}^{\prime}\left(1-\frac{{u}^{2}}{{c}^{2}}\right)}{u}$ and clock B time ${\text{clock\_reading}}_{0B}^{B}=-\frac{u{b}^{\prime}}{{c}^{2}}-\frac{{b}^{\prime}\left(1-\frac{{u}^{2}}{{c}^{2}}\right)}{u}=-\frac{{b}^{\prime}}{u}$ .

Quantities ${\text{clock\_reading}}_{0A}^{A}$ and ${\text{clock\_reading}}_{0B}^{B}$ denote times on clock A and B in the instants of their pass by clock 0.

Time $\Delta t={\text{clock\_reading}}_{0A}^{0}-{\text{clock\_reading}}_{0B}^{0}=\frac{{b}^{\prime}\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}{u}$ has elapsed be-

tween the two events (first and second passing of clock) in the time scale of clock 0 (system S), whereas in the time scale of mutually synchronized clocks A and B

(system S') time $\Delta {t}^{\prime}={\text{clock\_reading}}_{0A}^{A}-{\text{clock\_reading}}_{0B}^{B}=\frac{{b}^{\prime}}{u}$ has elapsed.

Time measured in the stationary system S is thus smaller than time measured in the moving system S'. Any observer moving with system S' observes that clocks in the stationary system S are slower than his own clock. This finding corresponds with reality as well as with Einstein’s STR.

The relativity of other phenomena can be similarly proved. It turns out that in terms of relativity all results of EMST are identical with results of STR!

5.3. Equivalence of Inertial Coordinate Systems

Even though the previous explanation was based on an existence of a “stationary coordinate system” that differs from all other coordinate systems in at least three aspects―the speed of light is independent of the direction of its propagation, coordinate time flows faster than proper time of all moving objects, the length scale of all axes is the same―we have to state now that such a coordinate system is undistinguishable from other (inertial) coordinate systems. As a result of an interaction of the five partial geometric-kinematic phenomena described above, all systems look the same and no physical experiment can determine whether the given system is moving or not. Thus we can state: Every inertial system behaves like a stationary system.

This fact can be considered as an equivalent of Einstein’s relativity postulate which states “All inertial coordinate systems are equivalent as far as the laws of physics are concerned”.

In the Euclidean model of space and time this fact is a result of the 4D speed invariance postulate. Since we know that all inertial systems are equivalent we can derive a new, more general statement from the 4D speed invariance postulate that excludes the demand on system’s stationarity:

“In any inertial coordinate system all objects are moving with 4D speed that is equal to the speed of light c.”

5.4. Note to Coordinate Systems

In four-dimensional space all objects are traveling at the speed of light, but the same cannot be allowed for coordinate systems. First―such coordinate systems cannot be inertial (as a result of oscillation in the fourth dimension), second―time would not flow in them (as a result of traveling by the speed of light).

Physical coordinate system is always connected with a particular physical object. All parts of this object are in the state of 4D motion but this motion is not significant for coordinate system definition. Only the object’s position and its state of motion in ordinary three-dimensional space are significant. This position and state of motion are a projection of 4D position and 4D motion into three-dimensional space. In reality the projection is done by simply omitting the fourth dimension. In this work coordinate systems are always connected with the projection of a chosen object into three-dimensional space and do not move in the fourth dimension.

6. Space and Time

6.1. Number of Dimensions

This work assumes an existence of four-dimensional Euclidean space E_{4}-R which replaces the four-dimensional pseudo-Euclidean spacetime of Einstein-Minkowski solution. In the Euclidean solution, it is necessary to decide whether to consider time as an independent quantity, i.e. a fifth dimension of “Euclidean spacetime” or merely as a function of spatial coordinates. If we specify position of an object in E_{4} by its spatial coordinates x, y, z and
$w\equiv c\tau $ , the coordinate time remains still unknown. E.g. if all four coordinates of two objects are identical we are still unable to decide whether these two objects are in collision or not (see point C on Figure 4). The situation will not improve even if we replace the cτ coordinate with coordinate w. It would seem that coordinate time t cannot be determined from spatial coordinates and thus it is an independent quantity―it is a fifth dimension of our world.

On the other hand the Formula (9) relates an increment of coordinate time Dt to the change of spatial coordinates x, y, z and $w\equiv c\tau $ . However, the formula can be applied to uniform translatory motion only. Nevertheless, its validity can be extended to a motion not maintaining direction nor velocity by simply dividing such a motion into infinitesimally small parts in which the motion is uniform. Then, the increment of time is

${c}^{2}\delta {t}^{2}=\delta {x}^{2}+\delta {y}^{2}+\delta {z}^{2}+{c}^{2}\delta {\tau}^{2}$ (20)

Through integration of this formula over the motion’s trajectory we can determine the time interval separating end of the motion from its beginning. This interval is, of course, directly proportional to the length of 4D trajectory.

In case of a change of the reference coordinate system (Lorentz boost) the increments of time dt transform in correspondence with Formula (20). In the new coordinate system the coordinate increments in axes x, y and z will be generally different, while the increments in cτ axis will not change.

Let us assume that two objects were located at point A in time t_{0}, i.e. they were in coincidence, which is expressed by equality of coordinates x, y, z. Then they moved along different trajectories and in time t_{1} they met again at point B. The necessary condition of a second encounter is equality of lengths of their 4D trajectories marked by the end points A and B,
${d}_{4D}^{1}\left(AB\right)={d}_{4D}^{2}\left(AB\right)$ .

If the situation described above is expressed in another coordinate system which moves with respect to the original one, the coordinates of points A and B will change, as well as the coordinate increments and 4D paths of both motions. However, even after the transformation, the equality ${{d}^{\prime}}_{4D}^{1}\left(AB\right)={{d}^{\prime}}_{4D}^{2}\left(AB\right)$ will apply, i.e. both trajectories transform in such a way that the lengths will be equal again. This is true, of course, only in the case that both trajectories share their initial and end points.

The possibility of determination of increments of coordinate time by formulas (9) and (20) is not only restricted to real motions. It can be also used for imaginary motions. The only two conditions are the unambiguous definition of the motion’s trajectory and the fact that such a motion can be accomplished. The latter condition is expressed by inequality Formula (8) and can be interpreted as a requirement that speed of the motion cannot exceed the speed of light c.

As a conclusion we can state that in all such cases where a time-like relation between the events exists, i.e. in cases in which it is possible to accomplish a motion originating in one event and ending in the other, the increment of coordinate time is a function of the motion’s trajectory. In other words, it is a function of the object’s coordinates change over the time. In such cases where the time relation between events doesn’t exist any functional relation between coordinate time and coordinates is non-existent as well. Mechanical usage of Formula (9) leads to the necessity of introduction of an imaginary proper time. Such a quantity, however, has no physical meaning and so such an approach has to be rejected.

6.2. Definition of Space

From the above consideration we can see apparent theoretical difficulty in definition of space and objects in it as a physical reality without any connection to the past. Such an approach would necessitate introduction of a fifth independent coordinate―coordinate time, while according to other considerations this coordinate cannot be independent. Thus in terms of presented Euclidean theory of space and time it is necessary to define space as a set of objects that has traveled to their current positions by unknown, but quite specific, trajectories. Existence of such trajectories is necessary for time location of those objects as well as events which the objects are participants. The formulas (9) and (20) allow no more than determination of time increments from some given event in the object’s history. So for an evaluation of equality of coordinate times of two objects which are in the same point of space it is necessary to accept an important assumption, ―these two objects have met at least once in their past. This assumption can be ensured in the only possible way―all the trajectories have a common initial point, i.e. once in the past all the objects simultaneously emerged from one common origin.

6.3. Relativistic Transformation of Space

Relativistic transformation of four-dimensional Euclidean space needs to be primarily understood as a transformation of trajectories. If a trajectory is specified in system S e.g. in a form of a sequence of trajectory vertex points given by their coordinates in E_{4}, partial increments of time Dt_{i} can be determined using Formula (9) and the overall duration of the motion Dt as their sum. Transformation of the trajectory vertex coordinates to the system S' is given by four equations of a modified Lorentz transformation (15), while duration of the motion Dt' can be determined by the same procedure as in the system S. So the Formula (16) is redundant and can be proved that it is a linear combination of formulas (15) and (9). Given explanation assumes that the origins of systems S and S' are identical in time t = t' = 0 and they are coincident with one terminal point of the trajectory. Then t = Dt and t' = Dt'. A convenient choice of coordinate systems can fulfil the assumption.

A different situation arises in the case of transformation of events that are not connected by any trajectory and such a trajectory cannot even be constructed additionally. In this case the Formula (9) cannot be used and thus we are left with Formulas (15) and (16) for the transformation, i.e. Lorentz transformation expanded to five equations. Transformed quantities are x, y, z, cτ and t. It is necessary to say that in reality the coordinate $w\equiv c\tau $ is unknown, but it does not pose a problem as the transformation can be done without it. The value of $w\equiv c\tau $ remains unchanged during the transformation and has no effect on the transformation of remaining coordinates.

7. Velocity, Inertia, Energy

7.1. Velocity of Motion

Expanding the concept of motion to the fourth spatial dimension leads to the necessity of expanding velocity notation as well. We shall go forth from a notation of velocity vector in ordinary three-dimensional space. That is denoted v (or u if it refers to the mutual velocity of two coordinate systems). In the case of 4D velocity we choose notation v_{4D} (notation u_{4D} has no sense since coordinate systems can move only in three dimensions―see chapter 5.4). For size of a vector, i.e. for scalar quantity, we will use notation v, u, v_{4D}. Velocity can be decomposed into individual components v_{x}, v_{y}, v_{z}, v_{w} in the direction of coordinate axes. In Euclidean space simple formulas apply

$v=\sqrt{{v}_{x}^{2}+{v}_{y}^{2}+{v}_{z}^{2}}$ (21)

${v}_{4D}=\sqrt{{v}_{x}^{2}+{v}_{y}^{2}+{v}_{z}^{2}+{v}_{w}^{2}}=c$ (22)

The equality of v_{4D} and c is a result of the 4D speed invariance postulate.

Meaning of components v_{x}, v_{y}, v_{z} is clear, component v_{w} is new and it expresses speed of motion in the fourth dimension. Its value is given by formula

${v}_{w}=\frac{c\Delta \tau}{\Delta t}=c\sqrt{1-\frac{{v}^{2}}{{c}^{2}}}$ (23)

Quantity Dτ here denotes the moving body’s proper time. It generally flows slower than time Dt of used coordinate system and so
${v}_{w}\le c$ . With increasing “3D” speed v, the component v_{w} will naturally decrease.

In further explanations we will study motion in the plane x - cτ thus v_{y} = v_{z} = 0, v = v_{x} (see Figure 12).

Speed is commonly defined by formula

$v=\frac{\Delta x}{\Delta t}$ (24)

i.e. as a trajectory divided by time. Given formula holds for uniform motion in the direction of axis x and it is depicted for various velocities in Figure 3. The figure clearly shows why the speed defined by Formula (24) cannot be larger than the speed of light c. The cause is the fact that Dx and Dt are not two independent quantities but a cathetus and hypotenuse in a right-angled triangle. For obvious geometric reasons the cathetus can never be longer than the hypotenuse. The same is expressed by Formula (22). The question arises whether definition of speed using Formula (24) is appropriate.

Let us introduce an alternative definition of speed by replacing coordinate time t by proper time τ

${v}_{i}=\frac{\Delta x}{\Delta \tau}$ (25)

This type of speed will be denoted as “indicated speed”^{5} in further text. Relation of indicated speed to “classic speed” is

${v}_{i}=\frac{v}{\sqrt{1-\frac{{v}^{2}}{{c}^{2}}}}$ (26)

Figure 12. Geometric representation of classic and indicated speed in plane x − cτ.

i.e. indicated speed is generally larger. For v = 0 is v_{i} = 0, for v = c is v_{i} = ∞^{6}.

Analogous to the classic speeds we now introduce four-dimensional notations for indicated speeds and their coordinate components. Thus formulas

${v}_{i}=\sqrt{{v}_{i,x}^{2}+{v}_{i,y}^{2}+{v}_{i,z}^{2}}$ (27)

${v}_{i,4D}=\sqrt{{v}_{i,x}^{2}+{v}_{i,y}^{2}+{v}_{i,z}^{2}+{v}_{i,w}^{2}}$ (28)

correspond to Formulas (21) and (22).

The 4D speed invariance postulate does not apply for indicated speeds. On the contrary, it holds
${v}_{i,w}=c$ , i.e. “indicated speed in the fourth dimension” is constant and does not change during relativistic transformation. It also holds that v_{i,y} and v_{i,z} do not change in the case of Lorentz boost in the direction of x axis.

7.2. Inertia and Energy

Now we will demonstrate how our understanding of inertia and energy will change should we accept the idea of four-dimensional Euclidean space in combination with indicated speeds.

Let us start from classic relativistic formulas for inertia and energy. It is known that a four-vector of inertia consists of three components of inertia p_{x} p_{y}, p_{z} and from the total energy of body E. It holds

${p}_{x}=\frac{{m}_{0}{v}_{x}}{\sqrt{1-\frac{{v}^{2}}{{c}^{2}}}}$ , ${p}_{y}=\frac{{m}_{0}{v}_{y}}{\sqrt{1-\frac{{v}^{2}}{{c}^{2}}}}$ , ${p}_{z}=\frac{{m}_{0}{v}_{z}}{\sqrt{1-\frac{{v}^{2}}{{c}^{2}}}}$ , $E=\frac{{m}_{0}{c}^{2}}{\sqrt{1-\frac{{v}^{2}}{{c}^{2}}}}$ (29)

and also the formula

${E}^{2}-{p}_{x}^{2}{c}^{2}-{p}_{y}^{2}{c}^{2}-{p}_{z}^{2}{c}^{2}={m}_{0}^{2}{c}^{4}$ (30)

Here
${E}_{0}={m}_{0}{c}^{2}$ is the so-called rest energy of the body. This is, as well as rest mass m_{0}, an invariant of the Lorentz transformation.

Components of four-vector transform similarly to coordinates of spacetime, i.e.:

${{p}^{\prime}}_{x}=\frac{{p}_{x}-\frac{u}{c}\frac{E}{c}}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ , ${{p}^{\prime}}_{y}={p}_{y}$ , ${{p}^{\prime}}_{z}={p}_{z}$ , $\frac{{E}^{\prime}}{c}=\frac{\frac{E}{c}-\frac{u}{c}{p}_{x}}{\sqrt{1-\frac{{u}^{2}}{{c}^{2}}}}$ (31)

Given formulas are an analogy of the partial formulas of Lorentz transformation (2).

Formula (30) can be transformed to the Euclidean form the same way we have transformed Formula (7) to the form (9). We get

${E}^{2}={p}_{x}^{2}{c}^{2}+{p}_{y}^{2}{c}^{2}+{p}_{z}^{2}{c}^{2}+{m}_{0}^{2}{c}^{4}$ (32)

Now let us substitute values from (29) to (32) and after some modifications we have

${E}^{2}={m}_{0}^{2}{c}^{2}\left(\frac{{v}_{x}^{2}+{v}_{y}^{2}+{v}_{z}^{2}}{1-\frac{{v}^{2}}{{c}^{2}}}+{c}^{2}\right)$

The velocities can be substituted using (21) and (26) which results in

${E}^{2}={m}_{0}^{2}{c}^{2}\left({v}_{i}^{2}+{c}^{2}\right)$

Since the velocity in brackets can be written as $\left({v}_{i,x}^{2}+{v}_{i,y}^{2}+{v}_{i,z}^{2}+{v}_{i,w}^{2}\right)$ it is from (28) obvious that the final formula reads

$E={m}_{0}c{v}_{i,4D}$ (33)

Similarly we can obtain formulas for components of inertia ${p}_{x}={m}_{0}{v}_{i,x}$ , ${p}_{y}={m}_{0}{v}_{i,y}$ , ${p}_{z}={m}_{0}{v}_{i,z}$ , and there is no reason not to add the fourth component ${p}_{w}={m}_{0}{v}_{i,w}$ . For components of inertia it obviously applies

$p=\sqrt{{p}_{x}^{2}+{p}_{y}^{2}+{p}_{z}^{2}}={m}_{0}{v}_{i}$ (34)

and analogically

${p}_{4D}=\sqrt{{p}_{x}^{2}+{p}_{y}^{2}+{p}_{z}^{2}+{p}_{w}^{2}}={m}_{0}{v}_{i,4D}$ (35)

It is interesting that a 4D velocity defined this way is, with the exception of units, equal to the total energy

${p}_{4D}=\frac{E}{c}$ (36)

while the inertia in the fourth dimension is equal to the rest energy

${p}_{w}=\frac{{E}_{0}}{c}={m}_{0}c$ (37)

The stated findings are interesting for several reasons:

1) Inertia and energy can be represented as quantities (vectors and scalars) in Euclidean four-dimensional space (see Figure 13).

Figure 13. Relation between inertia and energy.

2) Inertia and energy are of the same origin. If a 4D inertia vector is given, all other quantities are determined as well. Inertia, by its nature, is a four-dimensional vector. Its fourth spatial component, however, is in classic “three-dimensional” physics interpreted as a separate scalar quantity―rest energy E_{0}. Total energy E is the norm of a 4D inertia vector while kinetic energy is difference of total and rest energy: Ek = E - E_{0} (see Figure 13).

3) Introduction of indicated velocities leads to a significant simplification of formulas for energy and inertia. It can be seen that both quantities are directly proportional to the indicated velocity. It worth comparing the famous but slightly illogical formula for the total energy of a body E = mc^{2} with Formula (33). The new formula states nothing else than that energy of a body is a product of its rest mass multiplied by its indicated velocity. The quantity c in the formula has to be understood as no more than a constant adjusting unit.

4) Employment of indicated velocities in formulas for energy and inertia changes our view on body mass. The formulas do not assume the body’s mass increase when the body is accelerating. So-called relativistic mass increase is evidently caused by the use of an inconvenient time frame for description of the dynamical properties of objects. If the coordinate time t is replaced with the object’s proper time τ the reason for such mass increase vanishes.

8. Conclusions

Let us summarize the main features of EMST:

1) EMST is built on a type of a space that is quite familiar to us. Euclidean space is the only space which, based on our own life experience, we surely know exists.

2) Expansion of the number of spatial dimensions of Euclidean space from three to four contradicts our life experience; however the model itself gives explanations why all objects and the observable world as whole are three-dimensional.

3) The proposed model of space and time credibly explains cause of relativistic transformations of space and time. Everything is explained as a result of interaction of five partial, easily understandable geometric-kinematic effects.

4) The proposed model replaces two postulates of Einstein’s special theory of relativity with three other. Because the former postulates can be derived from the new, the mathematical expression of both theories is identical. This identity is however not valid for the geometrical interpretation of both theories. One of the postulates of EMST is euclidicity of 4D space which is in sharp contradiction with geometrical interpretation of STR. This contradiction is principal and inevitable.

5) The nature of time is explained as a direct consequence of motion of bodies in space. Because an object’s coordinate time is proportional to the length of its trajectory it is obvious that, regardless of motion type, the time is always growing and never decreasing. The flow of time cannot be reversed.

6) The model assumes existence of a stationary coordinate system with some outstanding features (isotropy of speed of light, fastest time flow, equality of length scales of axes) but simultaneously states that such a system cannot be distinguished from other inertial systems by any type of observation. As a result, all coordinate systems have (seemingly) all the above stated outstanding features.

7) The model explains why the speed of light is identical in all systems and why it is ultimate speed which cannot be overcome. It also offers a different definition of velocity which seems to be very convenient for expressing inertia and energy of a moving object. The model illustrates common physical nature of inertia and energy.

8) The model also implies that the universe emerged from a single point. The requirement of a common initial point for trajectories of all objects is necessary for definition of simultaneity.

Important Remark at the Closure

EMST gives an alternate description of the physical space we are living in. It describes space and time quite differently compared to the commonly accepted model of STR. So the question arises which description is correct and which is wrong. Although the mathematical expression of both models is equivalent we cannot hope that they are merely two different descriptions of the same reality. They are not!

Conflict of Interests

The author declares that there is no conflict of interests regarding the publication of this paper.

NOTES

^{1}Symbol u will be only used for mutual velocity of coordinate systems, the velocity of other objects will be marked as v.

^{2}On time values upper index regards to place, lower to event (instant of time).

^{3}Alternate notation w of the fourth axis will be also used in this article to highlight its space-like nature. In this notation the formula (9) reads
${c}^{2}\Delta {t}^{2}=\Delta {x}^{2}+\Delta {y}^{2}+\Delta {z}^{2}+\Delta {w}^{2}$ .

^{4}Relation between ordinary and 4D speed will be described in detail in chapter 7.1.

^{5}This speed should be shown by indicators on a spaceship in interstellar space so that the crew would know what distance would be covered in a day and thus how long the travel to the destination would take.

^{6}It’s interesting that the quantity of indicated speed v has no upper limit which corresponds to the original pre-relativistic understanding of speed.

Cite this paper

*Journal of Modern Physics*,

**9**, 1215-1249. doi: 10.4236/jmp.2018.96073.

[1] | Einstein, A. (1905) Ann Phys-Berlin, 17, 891-921. [English translation: (1920) On Electrodynamic of Moving Bodies. In: The Principle of Relativity, Calcutta University Press, 1-34] |

[2] | Minkowski, H. (1907) Die Grundgleichungen für die elektromagnetischen Vorgänge in bewegten Körpern. Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse, 53-111. [English translation: (1920) The Fundamental Equations for Electromagnetic Processes in Moving Bodies. In: The Principle of Relativity, Calcutta University Press, 1-69] |

[3] | Minkowski, H. (1909) Phys Z, 10, 104-111. [English translation: (1920) Space and Time. In: The Principle of Relativity, Calcutta University Press, 70-88] |

[4] |
Hawking, S. and Penrose, R. (1996) Scientific American, 275, 60-65. https://doi.org/10.1038/scientificamerican0796-60 |

[5] |
Hawking, S. (2014) The European Physical Journal H, 39, 413-503. https://doi.org/10.1140/epjh/e2014-50013-6 |

[6] |
Sonego, S. (1995) Physics Letters A, 208, l-7. https://doi.org/10.1016/0375-9601(95)00743-M |

[7] |
Tavokol, R. (2009) International Journal of Modern Physics A, 24, 1678-1685. https://doi.org/10.1142/S0217751X09045224 |

[8] |
Hohmann, M. (2013) Physical Review D, 87, 124034. https://doi.org/10.1103/PhysRevD.87.124034 |

[9] |
Brill, D. and Jacobson, T. (2006) General Relativity and Gravitation, 38, 643-651. https://doi.org/10.1007/s10714-006-0254-9 |

[10] |
Jonsson, R. (2001) General Relativity and Gravitation, 33, 1207-1235. https://doi.org/10.1023/A:1012037418513 |

[11] | Lorentz, H.A. (1904) Proceedings of the Royal Netherlands Academy of Arts and Sciences, 6, 809-831. |

Copyright © 2018 by authors and Scientific Research Publishing Inc.

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.