[1]
|
D. Younesian, E. Esmailzadeh and R. Sedaghati, “Passive Vibration Control of Beams Subjected to Random Excitations with Peaked PSD,” Journal of Vibration and Control, Vol. 12, No. 9, 2006, pp. 941-953.
doi:10.1177/1077546306068060
|
[2]
|
G. Genta, “Vibration Dynamics and Control,” Springer, New York, 2009. doi:10.1007/978-0-387-79580-5
|
[3]
|
Z. Mohamed, J. Martins, M. Tokhi, J. Costa and M. Botto, “Vibration Control of a Very Flexible Manipulator System,” Control Engineering Practice, Vol. 13, No. 3, 2005, pp. 267-277. doi:10.1007/978-0-387-79580-5
|
[4]
|
K. Melhem and W. Wang, “Global Output Tracking Control of Flexible Joint Robots via Factorization of the Mass Matrix,” IEEE Transactions on Robotics, Vol. 25, No. 2, 2009, pp. 248-257. doi:10.1007/978-0-387-79580-5
|
[5]
|
M. Ishikawa, Y. Minami and T. Sugie, “Development and Control Experiment of the Trident Snake Robot,” IEEE/ ASME Transactions on Mechatronics, Vol. 15, No. 1, 2010, pp. 9-16. doi:10.1109/TMECH.2008.2011985
|
[6]
|
R. Jamil, “Inverse Dynamics Based Tuning of a Fuzzy Logic Controller for a Single-Link Flexible Manipulator,” Journal of Vibration and Control, Vol. 13, No. 12, 2007, pp. 1741-1759. doi:10.1177/1077546307076282
|
[7]
|
T. Li and S. Tsai, “T-S Fuzzy Bilinear Model and Fuzzy Controller Design for a Class of Nonlinear Systems,” IEEE Transactions on Fuzzy Systems, Vol. 15, No. 3, 2007, pp. 494-506. doi:10.1109/TFUZZ.2006.889964
|
[8]
|
C. Ting, “An Observer-Based Approach to Controlling Time-Delay Chaotic Systems via Takagi-Sugeno Fuzzy Model,” Information Sciences, Vol. 177, No. 20, 2007, pp. 4314-4328. doi:10.1109/TFUZZ.2006.889964
|
[9]
|
L. Tian and C. Collins, “A Dynamic Recurrent Neural Network-Based Controller for a Rigid-Flexible Manipulator System,” Mechatronics, Vol. 14, No. 5, 2004, pp. 471-490. doi:10.1109/TFUZZ.2006.889964
|
[10]
|
M. Caswara and H. Unbehauen, “A Neurofuzzy Approach to the Control of a Flexible-Link Manipulator,” IEEE Transaction on Robotics and Automation, Vol. 18, No. 6, 2002, pp. 932-944. doi:10.1109/TRA.2002.805660
|
[11]
|
L. Tian and C. Collins, “Adaptive Neuro-Fuzzy Control of a Flexible Manipulator,” Mechatronics, Vol. 15, No. 10, 2005, pp. 1305-1320.
doi:10.1016/j.mechatronics.2005.02.001
|
[12]
|
W. Wang and O. Jianu, “A Smart Monitor for Machinery Fault Detection,” IEEE/ASME Transactions on Mechatronics, Vol. 15, No. 1, 2010, pp. 70-78.
doi:10.1109/TMECH.2009.2016956
|
[13]
|
W. Wang, “An Intelligent System for Machinery Condition Monitoring,” IEEE Transactions on Fuzzy Systems, Vol. 16, No. 1, 2008, pp. 110-122.
doi:10.1109/TFUZZ.2007.896237
|
[14]
|
Z. Sun, K. Au and T. Choi, “A Neuro-Fuzzy Inference System through Integration of Fuzzy Logic and Extreme Learning Machines,” IEEE Transactions on Systems, Man, and Cybernetics-Part B: Cybernetics, Vol. 37, No. 5, 2007, pp. 1321-1331.
doi:10.1109/TSMCB.2007.901375
|
[15]
|
P. Mastorocostas and J. Theocharis, “A Recurrent Fuzzy-Neural Model for Dynamic System Identification,” IEEE Transactions on System, Man and Cybernetics-Part B: Cybernetics, Vol. 32, No. 2, 2002, pp. 176-190.
|
[16]
|
K. Christodoulou and C. Papadimitriou, “Structural Identification Based on Optimally Weighted Modal Residuals,” Mechanical System and Signal Processing, Vol. 21, No. 1, 2007, pp. 4-23. doi:10.1016/j.ymssp.2006.05.011
|