A Comparative Study between Clients and Contractors on Competitive Tendering in the Sudan Construction Industry

Abstract

Competitive tendering was one of the main procurement methods for construction projects in the 20th century. Due to the disadvantages such as impacts of design change, quality of final products etc., continuous application of this tendering method to construction projects has become quite arguable. This research has examined and compared clients’ view and contractors’ view on competitive tendering in the Sudan construction industry. Considering their opposite positions in relation to competitive tendering, clients and contractors have been compared. 16 comprehensive questions were asked. The outcome shows that there is virtually no difference between clients’ view and contractors’ view in competitive tendering. Therefore, competitive tendering may be still efficient and effective in the 21st century as both parties are well aware of the advantages and disadvantages. Further researches are required possibly in other countries to verify the findings of this research.

Share and Cite:

Kang, B. , Elbashier, M. , Goh, B. and Song, M. (2015) A Comparative Study between Clients and Contractors on Competitive Tendering in the Sudan Construction Industry. Open Journal of Social Sciences, 3, 67-73. doi: 10.4236/jss.2015.37012.

1. Introduction

Tendering is one of the important pre-construction stages that the client should pass through for any construction project to be initiated. Basically tendering is the client selection of the most suitable contractor from a group of contractors who are invited either in public or directly depending on the tendering method. The client will set a deadline for the contractors to submit their bids to be reviewed and evaluated by the team. The most commonly used tendering processes in the construction industry are competitive tendering and negotiation. The two processes have been used worldwide for the selection of contractors for construction projects. Competitive tendering is a method that allows the undoubted interests of all organizations in the construction industry. The data and documentations used in competitive tendering are beneficial to those personnel in the construction industry who have contributed in estimating of construction projects or forecasting future trends [1]. Contrarily, negotiation is generally described as a means of communication between two parties (i.e. clients and contractors) and exchange of data and documents to conclude clients’ decisions [2]. For the tender price of construction projects, clients and contractors have opposite positions to each other, together with their different roles and responsibilities. For example, an increase in tender price will possibly help contractors’ profit and margin but be disadvantageous to clients’ financial arrangements. Competitive tendering might be the start point of this unpleasant conflict between clients and contractors.

The objectives of this research are:

To investigate current practice of competitive tendering in the Sudan construction industry;

To compare clients’ view and contractors’ view on competitive tendering in the Sudan construction industry.

2. Literature Review

2.1 Competitive Tendering in the Construction Industry

Competitive tendering involves the client awarding the contract to a certain contractor after going through the process of bid evaluation from a group of contractors who have shown their interests in winning the contract. Selection of contractors relies on the submitted documents which provide detailed descriptions of the plan on how the project will be executed and the corresponding cost of the construction services. Clients will also look through each of the contractor’s experience, financial status and their equipment [3] [4]. The most common tendering methods for construction projects are competitive tendering and negotiation. Table 1 shows the differences between competitive tendering and negotiation.

Open tendering and selective tendering are two main competitive tendering methods. In open tendering, the tendering is advertised in local, national and international press. Project details together with the evaluation standards will be included in the advertisement and an invitation for all interested contractors to propose their bids. Selective tendering is a method of selecting tenderers and obtaining tenders by a limited number of contractors who are invited to tender. The tender list is made up of contractors who are considered suitable and able to carry out the work. This suitability is usually determined by pre-selection procedures. Table 2 compares open tendering and selective tendering.

2.2. Advantages and Disadvantages of Competitive Tendering

These are several advantages and disadvantages of using competitive tendering for construction projects [5]-[8]: These are explained in detail. The advantages are:

2.2.1. Tends to Improve Efficiency and Quality

One of the objectives of competitive tendering is to achieve most efficient and best quality service to the client with the lowest possible price in both public and private sectors. The rules of competitive tendering does not allow for negotiation with the client after bids submission. So this will encourage the bidders to come up with their optimum bids and to be creative in their technical proposals to the client in order to succeed and win the contract.

2.2.2. Improvement of Contractor’s Performances

Competitive tendering requires clients’ inspection on the level of services based on the specifications and required level of quality. This generates competition and results in improving the contractor’s performances in construction projects.

2.2.3. Achieving the Best Value for Money

Competition is the one most effective ways in obtaining the best value for money. Competition motivates the contractors to provide the best services and to operate with their full capacities.

2.2.4. Mitigating Corruption and Favoritism

Competitive tendering also creates transparency which leads to the reduction of favoritism and corruption. It also

Table 1. Competitive tendering versus negotiation.

Table 2. Open tendering versus selective tendering.

ensures fair competition between tenderers.

However competitive tendering in the construction industry suffers from various disadvantages. These are:

2.2.5. Most of the Leading Contractors May Not Tender

Leading contractors are very demanded in the construction industry. They are extremely busy by committing to other projects to the extent that they might have a waiting list of clients. Competitive tendering cannot attract them.

2.2.6. Communication Is Restricted between the Client and the Contractor

In selection of contractors by competitive tendering, the only mean of communication between the client and the contractors is the bids. Rather there should be a specified period of time arranged by both parties to have a wide discussion about the designs and specifications in order to find out the necessary improvements.

2.2.7. Design Changes after Construction Starts, Results in High Cost

In competitive tendering, the confirmation of designs and specifications are done by the client. If the client discovers some changes to the design after construction starts, this consequently creates additional costs.

2.2.8. Use of Low Quality Materials and Labors

The contractor might find the use of poor quality material is the solution to keep the project cost unchanged and ensures the existence of profit while meeting the required specifications. This will eventually end up with a low quality product.

2.2.9. Advertisement and Contractors Selection Cost Is Expensive

In competitive tendering, the advertisement fees and tendering process costs are far higher than other methods of tendering such as selective tendering and negotiation.

2.3. Roles of Main Participants of Construction Project in Competitive Tendering

2.3.1. Client’s Roles

Invitation or advertisement of the project to the contractors, promotion of the competition between them and final evaluation of their bids are all conducted by the client to find the most suitable contractor. However, the client can assign the selection of the contractor to a consultant engineer/designer or a project manager, relying on their expertise in this field. Advertisement of government projects can be done through several means such as local newspapers, online websites, journals like Engineering News and Records and other weekly or daily publications. In case of private projects (i.e. projects sponsored by a private client), typically the client restricts the process of advertising the project to a limited number of selected contractors. During the process of bids evaluation, the client should ensure that the contractors has submitted all the necessary documents, the contractor satisfies the qualification and experience requirements. Once the lowest bidder is selected then both the client and the contractor sign the contract documents.

2.3.2. Consultant Engineer/Designer’ Roles

The consultant engineers/designers are responsible for the design process and assisting the clients in formulating the tender and contract documents such as drawings, specifications, conditions of contract and other essential documents. One of the main tasks of the designers is to ensure that the structural design is compatible with the design brief, specifications, and statutory requirements.

2.3.3. Project Managers’ Roles

Project managers are responsible exclusively to the client and acts in the client’s interests at every stage of the project. Project managers offer advice, uncoloured by any conflicting interest, on construction/project management.

2.3.4. Contractor’s Roles

Initially the contractors will come through the project’s requirements, drawing, specifications and bill of quantity which are prepared by the clients for them to decide whether to bid or not. At this stage of tender, the bidders should be creative and accurate since the time period is limited and very little to negotiate with materials and equipment suppliers, labor rates and subcontractors. The contractor will look into the project from different angles to make the decision of whether to bid or not, based on the factors such as project type, project size, type of client, availability of resources, degree of competition, conditions of contract, current market conditions.

2.4. An Overview about the Sudan Construction Industry

The Republic of Sudan is located in northeast Africa. Sudan was considered as the third biggest African country and the ninth in the world rankings in terms of area before the segregation of South Sudan. South Sudan became an autonomous government in 2005 and an independent country in 2011. Before the agreement was signed by the North and South government of Sudan in 2005, there was a long civil war between these two governments. During this civil war period, the economy of Sudan was so poor and consequently the construction industry was not much developed. Since the agreement in 2005, Sudan has experienced stability in the economic status and the government initiated to develop the country. The government used considerable amount of its expenditure in developing infrastructure in the capital city and other major cities. The infrastructure projects include highways, drainage systems and building constructions. Companies in the private sector also became very active particularly in housing renovations. This background of the Sudan construction industry justifies the needs of this research in competitive tendering.

3. Research Methodology

A questionnaire was developed based on the literature review. To comprehensively investigate the Sudan construction industry, the questionnaire attempted to obtain the respondent’s views on the advantages and disadvantages of competitive tendering as well as a comparison between both competitive tendering and negotiation. The questionnaire contained three sections with the following details:

・ Section [A]: Respondent background such as roles, responsibilities, experience, education, public sector or private sector;

・ Section [B]: To identify the strengths and weaknesses of competitive tendering, to compare competitive tendering and negotiation;

・ Section [C]: Preferred methods of tendering and comments.

4. Findings of the Survey

51 responses from the survey were received in the Sudan construction industry. The main questions in section B consist of 16 comprehensive questions related to competitive tendering for construction projects (Table 3). The collected data have been analyzed by using SPSS (Statistical Package for Social Sciences).

The first step to be performed by SPSS analysis is to test the normality of the variables based on their significance values. The main purpose of this test was to know whether to use parametric or non-parametric tests. To apply parametric tests, homogeneity and normality of the variances should be shown. If the variable violated these conditions then the variable will be considered abnormally distributed and accordingly non parametric tests will be applied on it. Table 4 shows results from Kolmogorov-Smirnov and Shapiro-Wilk test, indicating

Table 3. Descriptions of the questionnaire content.

Table 4. Test of normality in SPSS for the independent variables.

abnormal distributions of data. Therefore non-parametric tests are more appropriate to be used.

In this research the significance level of 0.05 has been used. So if the probability of a particular demographic factor is less than 0.05, then the null hypothesis is rejected and considered as being ‘statistically significant and unlikely happening due to chance’ (Table 5).

The survey participants comprise clients, project managers, consultants/designers and contractors/subcon- tractors. To make comparison between clients and contractors, these participants have been allocated into two groups-clients’ group (25 responses) and contractors’ group (26 responses). As project managers and consultants/designers work as clients’ representatives, they are included in clients’ group. Mann-Whitney is used in this research to examine and compare the two groups’ views. It can be concluded from the outcomes of the Mann-Whitney test that there is virtually no difference between clients’ group and contractors’ group in the views of the questionnaire except Q9 (Table 6). Therefore it can be concluded that even though the role/respon- sibilities and positions in relation to tender price are different between clients and contractors, their views on competitive tendering arte almost the same.

5. Conclusion

This research investigated and compared clients’ view and contractors’ view on competitive tendering in the Sudan construction industry. Despite their opposite positions in respect of tender price and different roles/re- sponsibilities, clients and contractors have almost the same view on the main aspects of competitive tendering. The questionnaire consists of comprehensive points of competitive tendering from various angles. Even though

Table 5. Significance Level.

Table 6. Test statistics of Mann-Whitney test (Clients’ Group vs. Contractors’ Group B).

competitive tendering has some disadvantages, it seems that this tendering method can still be efficient and effective to be used in the 21st century, as both parties are well aware of the advantages and disadvantages. Future research will be conducted in other countries to verify the finding of this research.

NOTES

*Corresponding author.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Towey, D. (2012) Construction Quantity Surveying: A Practical Guide for the Contractor’s QS. John Wiley & Sons.
[2] Harris, F. and McCaffer, R. (2013) Modern Construction Management. 7th Edition, John Willey and Sons, 243-249.
[3] Lewis, H. (2009) Bids, Tenders and Proposals: Winning Business through Best Practice. 3rd Edition, Kogan Page Limited.
[4] Knutson, K., Schexnayder, C.J. and Fiori, C. (2008) Construction Management Fundamentals. 2nd Edition, McGraw-Hill Education.
[5] Cartlidge, D. (2013) Estimator’s Pocket. Routledge, 38-45.
[6] Rumane, A.R. (2011) Quality Management in Construction Projects. Taylor and Francis Group.
[7] Winch, G.M. (2010) Managing Construction Projects. 2nd Edition, Willey-Blackwell.
[8] Loosemore, M. (2004) Essentials of Construction Project Management. University of New South Wales Press Ltd.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.