ENG> Vol.6 No.6, May 2014

Effect of Bearing Capacity on Designing Foundations in Iraq Using STAAD Pro-v8i

DownloadDownload as PDF (Size:4190KB)  HTML   XML  PP. 292-303  

ABSTRACT

Most of Iraqi soil is classified as Quaternary deposits, especially in the Mesopotamian plain and tributaries of the River Tigris. Soil varies from north to south of Iraq. These differences in soil affected the process to select the suitable type of foundation. This research is to study the effect of bearing capacity on shallow foundations in different regions of Iraq. Seventy nine samples were collected from 23 boreholes at three different locations (Mosul at the North, Baghdad at the middle and Basrah at the south of Iraq). The samples were collected at varying depth between 1 to 24 m. They were subjected to the following testes: Atterberg limits, sieve and hydrometers, consolidation, direct shear, unconfined compression and the filed (SPT test). The values of the bearing capacity parameters ( and c) were obtained from the above tests. The results obtained were used in the application of the general equation of the bearing capacity. Then, the model of a building was designed (two floors, with mat foundation type) using STAAD Pro software. The average values of bearing capacity in each region were applied in the program (Mosul = 177 KPa, Baghdad = 125 KPa and Basrah = 84 KPa). In addition, the worst bearing capacity values were also used for the three regions (Mosul = 77 KPa, Baghdad = 68 KPa and Basrah = 24 KPa). The results obtained from the average and worst bearing capacity indicated that for Mosul, we could use shallow foundation (spread and mat used if there was basement) for different areas and for buildings with many stories. For Baghdad region, shallow foundation was more suitable for building not higher than five stories. Finally, for Basrah region, shallow foundations were an appropriate selection, but for most areas deep foundation was the right choice.

Cite this paper

Al-Taie, E. , Al-Ansari, N. and Knutsson, S. (2014) Effect of Bearing Capacity on Designing Foundations in Iraq Using STAAD Pro-v8i. Engineering, 6, 292-303. doi: 10.4236/eng.2014.66033.

References

[1] Bowles, J.E. (1996) Foundation Analysis and Design. 5th Edition, McGraw-Hill Companies, Inc., Singapore.
[2] Coduto, D.P. (2001) Foundation Design: Principle and Practices. 2nd Edition, Prentice Hall, Upper Saddle River.
[3] Das, B.M. (2000) Fundamentals of Geotechnical Engineering. Brooks/Cole, Pacific Grove.
[4] Das, B.M. (2011) Principle of Geotechnical Engineering. 7th Edition, Cengage Learning, Stamford.
[5] Al-Taie, E., Al-Ansari, N, Knutsson, S. and Saad, T.E. (2013) Foundation Assessment in Different Parts of Iraq Using STAAD Pro v8i. Journal of Civil Engineering and Architecture, 7, 273-281.
[6] Buringh, P. (1960) Soils and Soil Condition in Iraq. Ministry of Agriculture, Baghdad.
[7] Jassim, S.Z. and Goff, J.J.C. (2006) The Geology of Iraq. Dolin, Hlvanf.
[8] Sissakian, V.K. (2000) Geological Map of Iraq. 3rd Edition, State Company of Geological Survey and Mining, Baghdad.
[9] Al-Saoudi, N., Al-Khafaji, A. and Al-Mosawi, M. (2013) Challenging Problems of Gypseous Soils in Iraq. Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, 479-482.
[10] Khattab, S.A.A., Al-Juari, K.A.K. and Al-Kiki, I.M.A. (2008) Strength, Durability and Hydraulic Properties of Clayey Soil Stabilized with Lime and Industrial Waste Lime. Al-Rafidain Engineering, 16, 102-116.
[11] Khattab, S.A.A. and Al-Omary, A.M.A. (2009) Effect of Disturbance and Gypsum Content on Soil Water Characteristic Curve. 2nd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, Near East University, Nicosia, North Cyprus, 28-30 May 2009, 426-433.
[12] Al-Juari, K.A.K. (2009) Volume Change Measurement of Collapsible Soil Stabilized with Lime and Wasit Lime. Tikrit Journal of Engineering Sciences, 16, 38-54.
[13] Khattab, S.I.A., Abed, R.S. and Al-Imam, B.M.A.A. (2013) Analyzing Some Geotechnical Properties of Soils to Predict the Swelling Potential in the Left Side of Mosul City Using GIS Methods. International Journal of Chemical, Environmental & Biological Sciences (IJCEBS), 1, 2320-4087.
[14] Karim, H.H., Ali, H.Z. and Hamdullah, A.H. (2010) Digitally Processed Geophysical Data Sets for Identification of Geological Features in Southern Iraq. Engineer & Technology Journal, 28, 236-252.
[15] Mahmood, R. and Albadran, A.A. (2002) Geotechnical Classification and Distribution of the Quaternary Deposits in Basrah City, South of Iraq. Iraqi Journal of Earth Sciences, 1, 6-16.
[16] Kadhim, M.M., Al-Saoudi, N.K.S. and Ziboon, A.R.T. (2013) Digital Geotechnical Maps of Basrah City Using Geographical Information Systems Technique. Engineering & Technology Journal, 31, 599-617.
[17] Al-Taie, M.A.J., Ali, A.M. and Albdran, B.N. (2009) Improvement of Selected Parts of Basrah Governorate Soil Using Resorcinol Resin. Basrah Journal of Sciences (C), 27, 1-16.
[18] Gunaratne, M. (2012) The Foundation Engineering Handbook. Taylor & Francis Group, New York.
[19] Mohammed, A.H., Yahya, A.Y. and Ahmed, B.A. (2012) Database for Baghdad Soil Using GIS Techniques. Journal of Engineering, 18, 1307-1324.
[20] Subramani, T., Ponnuvel, D. and Deans, D. (2012) Seismic and Stability Analysis of Gravity Dams Using Staad PRO. International Journal of Engineering Research and Development, 1, 44-45.
[21] Bhattacharjee, B. and Nagender, A.S.V. (2007) Computer Aided Analysis and Design of Multi-Storeyed Buildings. BSc. Thesis, National Institute of Technology Roukela, Roukela.
[22] Bentley, (2011) Staad Pro & Staad Foundation Software.
http://www.staadpro.com
[23] ACI Committee 318-08 (2008) Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary. American Concrete Institute, Farmington Hills.

  
comments powered by Disqus

Copyright © 2014 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.