[1]
|
F. K. Shan and Y. S. Yu, “Optical Properties of Pure and Al Doped ZnO Thin Films Fabricated with Plasma Produced by Excimer Laser,” Thin Solid Films, Vol. 435, No. 1-2, 2003, pp. 174-178.
|
[2]
|
A. Ashida, H. Ohta, J. Nagata and T. Ito, “Optical Propagation Loss of ZnO Films Grown on Sapphire,” Journal of Applied Physics, Vol. 95, No. 4, 2004, pp. 1673-1676.
|
[3]
|
M. Iked, “Ceramics Welding with Laser,” Taikabutsu Overseas, Vol. 5, No. 3, 1985, pp. 27-33.
|
[4]
|
B. l. Mordike and R. Sivakumar, “Laser Treatment of Materials,” DGM Information Sgesell Schaft, Oberursel, 1987, p. 373.
|
[5]
|
S. P. Harimkar and N. B. Dabotre, “Evolution of Surface Morphology in Laser-Dressed Alumina Grinding Wheel Material,” International Journal of Applied Ceramic Technology, Vol. 3, No. 5, 2006, pp. 375-381.
|
[6]
|
A. Krasnikov, A. Berezhnoi and L. Mrkim, “Structure and Properties of Ceramic Material after Laser Treatment,” Glass and Ceramic, Vol. 56, No. 5-6, 1999, pp. 172-176.
|
[7]
|
C. Ural, T. Kulunk, S. Kulunk and M. Kurt, “The Effect of Laser Treatment on Bonding between Zirconia Ceramic Surface and Resin Cement,” Acta Odontologica Scandinavica, Vol. 68, No. 6, 2010, pp. 354-359.
http://dx.doi.org/10.3109/00016357.2010.514720
|
[8]
|
H. Abeidia, A. Issa, M. Robin and G. Faniossi, “Realization of Melted Layers with CO2 Laser on Sintered Ceramic,” Journal de Physique IV, Vol. 1, No. C7, 1991, pp. 39-42.
|
[9]
|
S. Dyshlovenko, L. Pawlowski, I. Smurove and V. Veiko, “Pulsed Laser Modification of Hydroxylapatite Ceramic,” Surface and Coatings Technology, Vol. 201, 2006, pp. 2248-2255.
|
[10]
|
J. G. Dimitrov, P. A. Atanasov and T. Vasiler, “Al-Doped ZnO Thin Films for Gas Sensor Application,” Journal of Physics: Conference Series, Vol. 113, 2008, Article ID: 012044.
|
[11]
|
J. H. Adawiya, et al., “Effect of Alumina-Doping Structural and Optics Properties of ZnO Thin Film by Pulsed Laser Deposition,” Journal of Engineering & Technology, Vol. 28, No. 14, 2010, pp. 4677-4686.
|