Compressive Strength of Jordanian Cement Mortars

Abstract

Mortars have been prepared from six cement Jordanian brands and tested for their compressive strengths at 2, 7 and 28 days. The strength has been related to some physical parameters. It has been concluded that the compressive strength and its development with age has some variations between the different cement brands. There is an inverse linear relationship between compressive strength and water absorption, and a weaker positive relation with density. There is no clear relation between consistency and compressive strength. Inverse linear relations exist between less than 63 microns size fraction and strength. To account for the differences in compressive strength at different ages and using different cement brands, it is very important to identify the type and amount of cement mineral phases using concrete petrography and X-ray diffraction and fluorescence techniques.

Share and Cite:

H. Al-Baijat, M. Bignozzi and B. Mohd, "Compressive Strength of Jordanian Cement Mortars," Open Journal of Civil Engineering, Vol. 3 No. 1, 2013, pp. 7-12. doi: 10.4236/ojce.2013.31002.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] ASTM C150-00, “Standard Specification for Portland Cement,” ASTM International. www.astm.org
[2] ASTM C1157, “Standard Performance Specification for Hydraulic Cement,” ASTM International. www.astm.org
[3] American Concrete Institute, “225R-99: Guide to the Selection and Use of Hydraulic Cements,” Manual of Concrete Practice, 1999.
[4] G. J. Frohnsdorff, “Portland Cements, Blended Cements and Mortars,” Concise Encyclopedia of Building and Construction Materials, 1990, pp. 495-504.
[5] A. M. Neville, “Properties of Concrete,” 4th Edition, Prentice Hall, Upper Saddle River, 2000.
[6] F. Miller and T. Conway, “Use of Ground Granulated Blast Furnace Slag for Reduction of Expansion Due to Delayed Ettringite Formation,” Cement and Concrete Aggregates, Vol. 25, No. 2, 2003, pp. 221-230.
[7] U. Noor, “Study of the Physical Parameters of Ordinary Portland Cement of Khyber Pakhtoon Khwa, Pakistan and Their Comparison with Pakistan Standard Specifications,” Chemical Engineering Research Bulletin, Vol. 14, No. 1, 2010, pp. 7-10.
[8] EN-196-1, “Methods of Testing Cement—Determination of Strength,” European Standards EN-196-1, 2005.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.