Applying Photogrammetric Techniques to Determine Facade Decays: The Case Study of Zisa Palace, Italy

Abstract

The aim of this paper is to present a non-destructive method for fa?ade decay analysis and quantifying with many applications to architectural heritage (monuments, historical buildings, etc.). The proposed methodology is based on the combination of topographic surveys, digital photogrammetry and image processing techniques by means of four control points and one photography of the target fa?ade, at least, that become metric rectified image at any plane defined by the user. It is possible to quantify any physical characteristic of the surface of a building as well as alterations on its surface that produce deviations from flatness. The Bundle adjustment was applied to a 2D reconstruction algorithm instead to a 3D reconstruction algorithm to control the flatness of a fa?ade of a monument, the Zisa Palace in Palermo (Italy). Significant deviations of the points in the vicinity of the edge left of the fa?ade with respect to the coordinates of the points of support were evidenced, indicating that the overall facade of the monument is not a flat surface. The results, with an estimated 10–3 accuracy, suggest that a structural failure in an area of the fa?ade may be occurred after the restoration work or, alternatively, that such restoration was not performed successfully in that area.

Share and Cite:

E. Calabrò, "Applying Photogrammetric Techniques to Determine Facade Decays: The Case Study of Zisa Palace, Italy," Engineering, Vol. 4 No. 11, 2012, pp. 707-712. doi: 10.4236/eng.2012.411091.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] A. D. Styliadis and L. A. Sechidis, “Photography-Based Fa?ade Recovery & 3-d Modeling: a CAD Application in Cultural Heritage,” Journal of Cultural Heritage, Vol. 12, No. 3, 2011, pp. 243-252. doi:10.1016/j.culher.2010.12.008
[2] M. Montoto, et al., “Non-Destructive Ultrasonic Procedure to Evaluate in Situ the Relative Deterioration of Monumental Stones: Preliminary Results,” Science, Technology, and European Cultural Heritage: Proceedings of the European Symposium, Bologna, 13-16 June 1989, Butterworth-Heinemann Publishers, Guildford, pp. 545548.
[3] C. B. B?hm, “Techniques and Tools for Conservation Investigations,” 10th International Congress on Deterioration and Conservation of Stone, Stockholm, 27 June-2 July, 2004, Vol. 2, pp. 549-559.
[4] A. Moropoulou, N. P. Avdelidis and P. Theoulakis, “Outdoor Thermographic Survey of Historic Structures,” In: K. E. Cramer and X. P. Maldague, Eds., Thermosense XXV, Proceedings of SPIE (The International Society for Optical Engineering), Bellingham, 1 April 2003, pp. 117-121.
[5] E. Grinzato, S. Marinetti, P. G. Bison, M. Concas and S. Fais, “Comparison of Ultrasonic Velocity and IR Thermography for the Characterization of Stones,” Infrared Physics and Technology, Vol. 46, No. 1-2, 2004, pp. 6368. doi:10.1016/j.infrared.2004.03.009
[6] A. Tavukcuoglu, A. Duzgunes, E. N. Caner-Saltik and S. Demirci, “Use of IR Thermography for the Assessment of Surface-Water Drainage Problems in a Historical Building, Agzikarahan (Aksaray),” NDT & E International, Vol. 38, No. 5, 2005, pp. 402-410. doi:10.1016/j.ndteint.2004.11.003
[7] T. D. Goncalves, L. Pel and J. D. Rodrigues, “Influence of Paints on Drying and Salt Distribution Processes in Porous Building Materials,” Construction and Building Materials, Vol. 23, No. 5, 2009, pp. 1751-1759. doi:10.1016/j.conbuildmat.2008.08.006
[8] E. Calabrò, et al., “An Approach to Analysis of Environment Induced Decay by Spectrophotogrammetric Techniques,” In: Edas, Ed., Highlights of Frontiers in Translational Research in the Mediterranean Area, 2008, pp. 6775.
[9] T. Malzbender, D. Gelb and H. Wolters, “Polynomial Texture Maps,” Proceedings of the 28th Annual Conference on Science and Technology in the Computer Graphics and Interactive Techniques, New York, 2001, pp. 519528..
[10] W. D. Robertson, “Evaluation of the Durability of Limestone Masonry on Historic Buildings,” In: Science and Technology in the Service of Conservation, InternshipsInstitute for Conservation, London, 1982, pp. 51-55.
[11] G. Zingone, “Structural Preservation of Italy’s Monuments: Restoration of the Zisa Palace, Palermo,” Structural Engineering International, Vol. 3, No. 1, 1993, pp. 22-25. doi:10.2749/101686693780608100
[12] W. Wester-Ebbinghaus, “Das Réseau im Photogrammetrischen Bildraum,” Bildmessung und Luftbildwesen, Vol. 3, 1989, pp. 64-71.
[13] G. Pomaska, “Automated Processing of Digital Image in Architectural Surveying,” International Archives of Photogrammetry and Remote Sensing, Vol. XXXII, Hakodate, 1998, pp. 637-642.
[14] G. Bezoari, C. Monti and A. Selvini, “La Fotogrammetria per l’Architettura,” Liguori, Naples, 1992.
[15] E. Baltsavias and B. Waegli, “Quality Analysis and Calibration of DTP Scanners” International Archives of Photogrammetry and Remote Sensing, Vol. 31, 1996, pp. 1319.
[16] B. Triggs, P. McLauchlan, R. Hartley and A. Fitzgibbon, “Bundle Adjustment—A Modern Synthesis,” ICCV’99 Proceedings of the International Workshop on Vision Algorithms: Theory and Practice, Springer-Verlag, London, 2000, pp. 298-372.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.