[1]
|
Comité Européen de Normalisation (CEN), “EN 12150 European Standard: Glass in Building Thermally Toughened Soda-Lime Silicate Glass, Part 1-2,” Comité Européen de Normalisation, Brussels, 2000.
|
[2]
|
P. Acloque, “Deferred Processes in the Fragmentation of Tempered Glass,” Proceedings of the 4th International Glass Congress, Vol. 6, 1956, pp. 279-291.
|
[3]
|
J. M. Barsom, “Fracture of Tempered Glass,” Journal of the American Ceramic Society, Vol. 51, No. 2, 1968, pp. 7578. doi:10.1111/j.1151-2916.1968.tb11840.x
|
[4]
|
K. Akeyosh and E. Kanai, “Mechanical Properties of Tempered Glass,” Proceedings of the 7th International Glass Congress, Vol. 14, 1965, pp. 80-85.
|
[5]
|
A. I. Shuto, P. B. Popov and A. B. Bubeev, “Prediction of the Character of Tempered Glass Fracture”, Glass and Ceramics, Vol. 55, No. 1-2, 1998, pp. 8-10.
doi:10.1007/BF03180135
|
[6]
|
R. Tandon and S. J. Glass, “Fracture Mechanics of Ceramics; Active Materials, Nanoscale Materials, Composites, Glass, and Fundamentals,” Springer, Vol. 14, 2005, pp. 77-92.
|
[7]
|
S. T. Gulati, “Frangibility of Tempered Soda-Lime Glass Sheet,” Glass Performance Days, 1997, pp. 13-15.
|
[8]
|
E. Mognato, A. Barbieri, M. Schiavonato and M. Pace, “Thermally Toughened Safety Glass: Correlation between Flexural Strength, Fragmentation and Surface Compressive Stress,” Glass Performance Days, 2011, pp. 115-118.
|
[9]
|
D. Hull, “Fractography-observing, measuring and interpreting fracture surface to topography”, Cambridge University Press, Cambridge, 1999, pp. 91-150.
|
[10]
|
J. H. Nielsen, J. F. Olesen and H. Stang, “The Fracture Process of Tempered Soda-Lime-Silicate Glass,” Experimental Mechanics, Vol. 49, No. 6, 2009, pp. 855-870.
doi:10.1007/s11340-008-9200-y
|
[11]
|
K. Akeyoshi, Report of the Research Laboratory, Asahi Glass Company, Ltd., Vol. 17, No.1, 1967, pp. 23-36.
|
[12]
|
M. Schiavonato, E. Mognato and A. S. Redner, “Stress Measurement, Fragmentation and Mechanical Strength,” Glass Performance Days, 2005, pp. 92-95.
|
[13]
|
H. Hessenkemper, “Kosten und Qualit?tssituation für PVGl?er,” Engineered Transparency—International Conference at Glasstec, Düsseldorf, 29-30 September 2010.
|
[14]
|
A. S. Redner, E. Mognato and M. Schiavonato, “Correlation between Strength and Measured residual stress in tempered glass products,” Journal of ASTM International, Vol. 2, No. 3, 2005, pp. 85-94. doi:10.1520/JAI12565
|