Evaluation of Mechanical Properties of Medium Carbon Steel Quenched in Water and Oil

Abstract

Samples of medium carbon steel were examined after heating between 900℃ - 980℃ and soaked for 45 minutes in a muffle furnace before quenching in palm oil and water separately. The mechanical behavior of the samples was investigated using universal tensile testing machine for tensile test and Vickers pyramid method for hardness testing. The microstructure of the quenched samples was studied using optical microscope. The tensile strength and hardness values of the quenched samples were relatively higher than those of the ascast samples, suggesting improved mechanical properties. However, samples quenched in palm oil displayed better properties compared with that of water-quenched samples. This behavior was traced to the fact that the carbon particles in palm oil quenched samples were more uniform and evenly distributed, indicating the formation of more pearlite structure, than those quenched in water and the as-received samples.

Share and Cite:

J. Odusote, T. Ajiboye and A. Rabiu, "Evaluation of Mechanical Properties of Medium Carbon Steel Quenched in Water and Oil," Journal of Minerals and Materials Characterization and Engineering, Vol. 11 No. 9, 2012, pp. 859-862. doi: 10.4236/jmmce.2012.119079.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Smith W.F. and Hashemi, J. (2006), “Foundation of Materials Science and Engineering, 4th edition, McGraw-Hill, USA.
[2] T.V. Rajan, C.P. Sharma and A. Sharma (1988), “Heat Treatment-Principles and Techniques”, Prentice-Hall of India Private Limited, New Delhi, p. 451.
[3] K.E Thelning (1984), “Steel and its Heat treatment, 2nd ed., Butterworth, London, p.145.
[4] C. Feng and Tahir I. Khan (2008), “The Effect of Quenching Medium on the Wear Resistance of a Ti-6Al-4V alloy”, J. Mater. Sci., 43, 788-792.
[5] J. Rassiza-dehghani, Sh. Raygan and M. Askari (2006), “Comparison of the Quenching Capacities of Hot Salt and Oil Baths”, Metal Science and Heat Treatment, 48 (5), 8-11.
[6] G. Krauss (1990), “Steels: Heat treatment and Processing Principles”, ASM Int. pp 125-345.
[7] S.A. Grishin and Yu. N. Churyukin (1986),”Evaluation of the Cooling Capacity of Quenching Media Based on Water”, Metal Science and Heat Treatment, Vol. 30, No.5, pp 86-88.
[8] A.I. Kulikov (1997), “A New Quenching Medium for Metals and Alloys”, Metal Science and Heat Treatment, Vol. 39, Nos. 11-12, 528-530.
[9] A.V. Tolstousov and O.A. Bannykh (1981), “New Quenching Media Based on Water-Soluble Polymers”, Metal Science and Heat Treatment, Vol. 23, No. 2, 104-106.
[10] M.B. Ndaliman, “An assessment of Mechanical Properties of Medium Carbon Steel under Different Quenching Media”, AU Journal of Tech., 10 (2), 100-104.
[11] S. Gündüz and A. Capar (2006), “Influence of Forging and Cooling Rate on Microstructure and Properties on Medium Carbon Microalloy Forging Steel”, J. Mater Sci., 41, 561-564.
[12] D.R. Askeland (1996), in The Science and Engineering of Materials, Chapman and Hall, London, 239.
[13] I. Madariage, I. Gutierrez, A.C. Garcia-de and C. Capdevilla (1999), Scripta Mater., 41, 229.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.