[1]
|
K. J. Anusavice, “Phillip’s Science of Dental Materials,” 10th Edition, WB Saunders Company, Philadelphia, 1996.
|
[2]
|
A. U. Yap, S. H. Yap, C. K. Teo and J. J. Ng, “Finishing/Polishing of Composite and Compomer Restoratives: Effectiveness of One-Step Systems,” Oper Dent, Vol. 29, No. 3, 2004, pp. 275-279.
|
[3]
|
A. Wahadni and D. M. Martin, “Glazing and Finishing Dental Porcelain: A Literature Review,” Journal of the Canadian Dental Association, Vol. 64, No. 8, 1998, pp. 580-583.
|
[4]
|
R. E. Goldstein, “Finishing of Composites and Laminates,” Dental Clinics of North America, Vol. 33, No. 2, 1989, pp. 305-318.
|
[5]
|
A. Vichi, C. Louca, G. Corciolani and M. Ferrari, “Color Related to Ceramic and Zirconia Restorations: A Review,” Dental Materials, Vol. 27, No. , 2011, pp. 97-108.
doi:10.1016/j.dental.2010.10.018
|
[6]
|
G Knispel, “Factors Affecting the Process of Color Matching Restorative Materials to Natural Teeth,” Quintessence International, Vol. 22, No. 7, 1991, pp. 525-531.
|
[7]
|
R. R. Seghi, E. R. Hewlett and J. Kim, “Visual and Instrumental Colorimetric Assesments of Small Color Differences on Translucent Dental Porcelain,” J Dent Res, Vol. 68, No. 12, 1989, pp. 1760-1764.
doi:10.1177/00220345890680120801
|
[8]
|
R. L. Raimondo, J. T. Richardson and B. Wiedner, “Polished versus Autoglazed Dental Porcelain,” Journal of Dental Research, Vol. 64, No. 5, 1990, pp. 553-557.
doi:10.1016/0022-3913(90)90126-W
|
[9]
|
K. J. Anusavice and R. W. Phillips, “Phillip’s Science of Dental Materials,” 11th Edition, Elsevier, St. Louis, 2003.
|
[10]
|
C. J. Patterson, A. C. McLundie and D. R. Stirrups, “Efficacy of a Porcelain Refinishing System in Restoring Surface Finish after Grinding with Fine and Extra-Fine Diamonds Burs,” Journal of Prosthetic Dentistry, Vol. 68, No. 3, 1992, pp. 402-406.
doi:10.1016/0022-3913(92)90400-5
|
[11]
|
W. D. Sulik and E. J. Plekavich, “Surface Finishing of Dental Porcelain,” Journal of Prosthetic Dentistry, Vol. 46, No. 2, 1981, pp. 217-221.
doi:10.1016/0022-3913(81)90312-7
|
[12]
|
V. B. Haywood, H. O. Heymann, R. P. Kusy, J. Q. Whitley and S. B. Andreaus, “Polishing Porcelain Veneers: An SEM and Specular Reflectance Analysis,” Dental Materials, Vol. 4, No. 3, 1988, pp. 116-121.
doi:10.1016/S0109-5641(88)80003-4
|
[13]
|
L. H. Klausner, C. B. Cartwright and G. T. Charbeneau, “Polished versus Autoglazed Porcelain Surfaces,” Journal of Prosthetic Dentistry, Vol. 47, No. 2, 1982, pp. 157-162.
doi:10.1016/0022-3913(82)90180-9
|
[14]
|
A. O. E. El-Karaksi, G. I. Shehab and M. E. Eskander, “Effect of Reglazing and of Polishing on the Surface Roughness of New Ceramic Restoration (Hi Ceram),” Egyptian Dental Journal, Vol. 39, No. 3, 1993, pp. 485-490.
|
[15]
|
N. Barghi, C. J. King and R. A. Draughn, “A Study of Porcelain Surfaces as Utilized in Fixed Prosthodontics,” Journal of Prosthetic Dentistry, Vol. 34, No. 3, 1975, pp. 314-319. doi:10.1016/0022-3913(75)90109-2
|
[16]
|
R. S. Nishioka, M. A. Bottino and A. Trevisan, “Scanning Electron Microscopy Evaluations of Glazed Porcelain Surface and Intra-Oral Polishing Tecnique,” Pós-Grad Rev Fac Odontol Sao José Campos, Vol. 2, No. 2, 1999, pp. 48-51.
|
[17]
|
S. D. Campbell, “Evaluation of Surface Roughness and Polishing Techniques for New Ceramic Materials,” Journal of Prosthetic Dentistry, Vol. 61, No. 5, 1989, pp. 563-568. doi:10.1016/0022-3913(89)90276-X
|
[18]
|
Y. Hosoya, “Five-Year Colour Changes of Light-Cured Resin Composites: Influence of Light Curing Times,” Dental Materials, Vol. 15, No. 4, 1999, pp. 268-274.
doi:10.1016/S0109-5641(99)00046-9
|
[19]
|
G. Heydecke, F. Zhang and E. Razzoog, “In Vitro Color Stability of Double Layer Veneers after Accelerated Aging,” Journal of Prosthetic Dentistry, Vol. 85, No. 6, 2001, pp. 551-557. doi:10.1067/mpr.2001.115385
|
[20]
|
D. C. Jagger and A. Harrison, “An in Vitro Investigation into the Wear Effects of Unglazed, Glazed, and Polished Porcelain on Human Enamel,” Journal of Prosthetic Dentistry, Vol. 72, No. 3, 1994, pp. 320-323.
doi:10.1016/0022-3913(94)90347-6
|
[21]
|
E. R. Schlissel, D. A. Newitter, R. R. Renner and A. J. Gwinnett, “An Evaluation of Post Adjustment Polishing Techniques for Porcelain Denture Teeth,” Journal of Prosthetic Dentistry, Vol. 43, No. 3, 1980, pp. 258-265.
doi:10.1016/0022-3913(80)90399-6
|
[22]
|
H. Fisher, M. Schafer and R. Marcs, “Effects of Surface Roughness on Flexural Strength of Veneer Ceramics,” Journal of Prosthetic Dentistry, Vol. 82, No. 12, 2003, pp. 972-975. doi:10.1177/154405910308201207
|
[23]
|
U. Lohbauer, F. A. Muller and A. Petschelt, “Influence of Surface Roughness on Mechanical Strength of Resin Composite versus Glass Ceramic Materials,” Dental Materials, Vol. 24, No. 2, 2008, pp. 250-256.
doi:10.1016/j.dental.2007.05.006
|
[24]
|
N. Barghi, C. J. King and R. A. Draughn, “A Study of porcelain Surfaces as Utilized in Fixed Prosthodontics,” Journal of Prosthetic Dentistry, Vol. 34, No. 3, 1975, pp. 314-319.
|
[25]
|
C. J. Patterson, A. C. McLundie, D. R. Stirrups and W. G. Taylor, “Refinishing of Porcelain by Using a Refinishing Kit,” Journal of Prosthetic Dentistry, Vol. 65, No. 3, 1991, pp. 383-388. doi:10.1016/0022-3913(91)90229-P
|
[26]
|
S. F. Rosenstiel, M. A. Baiker and W. M. Johnston, “A Comparison of Glazed and Polished Dental Porcelain,” International Journal of Prosthodontics, Vol. 2, No. 6, 1989, pp. 524-529.
|
[27]
|
M. C. Bottino, L. F. Valandro, K. Z. Kantorski, J. C. Bressiani and M. A. Bottino, “Polishing Methods of an Alumina-Reinforced Feldspar Ceramic,” Brazilian Dental Journal, Vol. 17, No. 4, 2006, pp. 285-289.
doi:10.1590/S0103-64402006000400004
|
[28]
|
D. Sarac, Y. S. Sarac, S. Kulunk, C. Ural and T. Kulunk, “The Effect of Polishing Techniques on the Surface Roughness and Color Change of Composite Resins,” Journal of Prosthetic Dentistry, Vol. 96, No. 1, 2006, pp. 3340. doi:10.1016/j.prosdent.2006.04.012
|
[29]
|
A. U. Yap, “Color Attributes and Accuracy of Vita-Based Manufacturer’s Shade Guides,” Oper Dent, Vol. 23, No. 5, 1998, pp. 266-267.
|