Fuzzy vs. Probabilistic Techniques to Address Uncertainty for Radial Distribution Load Flow Simulation

Roma Raina, Mini Thomas

Faculty, Manipal University, Dubai, UAE.
Jamia Millia Islamia University, New Delhi, India.

DOI: 10.4236/epe.2012.42014                

Abstract

For Power distribution system the most important task for distribution engineer is to efficiently simulate the system and address the uncertainty using a suitable mathematical method. This paper presents a comparison of two methods used in analyzing uncertainties. The first method is Montecarlo simulation (MCS) that considers input parameters as random variables and second one is fuzzy alpha cut method (FAC) in which uncertain parameters are treated as fuzzy numbers with given membership functions. Both techniques are tested on a typical Load flow solution simulation, where connected loads are considered as uncertain. In order to provide a basis for comparison between above two approaches, the shapes of the membership function used in the fuzzy method is taken same as the shape of the probability density function used in the Monte Carlo simulations. For more than one uncertain input variable, simulation result indicates that MCS method provides better output results compared to FAC, however takes more time due to number of runs. FAC provides an alternate method to MCS when addressing single or limited input variables and is fast.

Keywords

Fuzzy Set; Radial Power Distribution; Montecarlo; Load Flow

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	D. M. Falcao, “Load Estimation in Radial Distribution Systems Using Neural Networks and Fuzzy Set Techniques,” Power Engineering Society Summer Meeting, Vancouver, 15-19 July 2001, pp. 1002-1006. doi:10.1109/PESS.2001.970195
[2]	C.-W. Liu, C.-S. Chang and M.-C. Su, “Neuro-Fuzzy Networks for Voltage Security Monitoring Based on Syncronized Phasor Measurements,” IEEE Transactions on Power Systems, Vol. 13, No. 2, 1998, pp. 326-332. doi:10.1109/59.667346
[3]	I. J. Ramirez-Rosad and J. A. Dominguez-Navarro, “Possibilistic Model Based on Fuzzy Sets for the Multiobjective Optimal Planning of Electric Power Distribution Networks,” IEEE Transactions on Power Systems, Vol. 19, No. 4, 2004, pp. 1801-1810. doi:10.1109/TPWRS.2004.835678
[4]	V. Kumar and M. Schuhmacher, “Fuzzy uncertainty analysis in system modeling,” European Symposium on Computer Aided Chemical Engineering, Vol. 20, 2005, pp. 391-396. doi:10.1016/S1570-7946(05)80187-7
[5]	A. J. Abebe, V. Guinot and D. P. Solomatine, “Fuzzy Alpha-Cut vs. Monte Carlo Techniques in Assessing Uncertainity in Model Parameters,” Proceedings of the 4th International Conference on Hydro Informatics, Iowa City, 23-27 July 2000, pp. 1-8.
[6]	M. S. Thomas, R. Ranjan and R. Raina, “Fuzzy Modeled Load Flow Solution for Unbalanced Radialpower Distribution System,” Proceedings of the IASTED International Conference, Crete, 22-24 June 2011, pp. 153-159. doi:0.2316/P.2011.714-003
[7]	D. Thukram, H. M W.Banda and J. Jerome, “A Robust Three Phase Power Flow Algorithm for Radial Distribution Systems,” Journal of Electrical Power Systems Research, Vol. 50, No. 3, 1999, pp. 227-236. doi:10.1016/S0378-7796(98)00150-3