Fractal Characteristics of Microporous Adsorbents

The traditional version of the theory of volume filling of micropores was used for the estimation of the fractal dimension of microporous solids. For this purpose, the Dubinin’s integral equation was solved for infinite and limited integration limits. The results were applied to the adsorption of nitrogen (T = 78 K) on coal samples and Davisil F silica and to the adsorption of water (Т = 293 К) on lunar soil sample and on rice starch.


Introduction
The description of microporous adsorbents is a complicated problem in physical chemistry.One can distinguish two methods for the description of microporous adsorbents: macroscopic and microscopic.
The macroscopic method considers the macro-level (macroscopic thermodynamic), using the experimentally measured parameters and generalizing the obtained results.Their deficiency consists in the assumption of a size (or energy) distribution (fractal function) of micropores.Therefore, the distribution of micropores plays a dominating role.The most widespread macroscopic method is the theory of volume filling of micropores (TVFM).The simplest description by TVFM is given by the Dubinin-Radushkevich (DR) approach assuming a Gaussian or generalized Gaussian size distribution of micropores [1] [2].
Stoeckli proposed a VFM-model taking into account heterogeneous properties V. V. Kutarov  of materials.He assumed that a real material contains elements which can be separately described by the general equations of VFM.However, the parameters of equations for separate elements depend on the heterogeneous material (complex structures) changes [3].
The microscopic description considers the molecular level: this allows obtaining the molecular comprehension of the measured parameters.This feature makes it possible to calculate the pore size distribution.One describes the adsorbate-pore interaction based on several models of the solid structure.The most interesting microscopic methods are the Horvath-Kawazoe (HK) method [4] and the density functional method [5].
Another way for the description of complex structures, beside the macro-and microscopic approach, is fractal geometry.The fractal geometry approach is applied successfully in heterogeneous chemistry.The geometry of the interface is a key parameter that affects the molecule-surface interaction.Surface irregularity affects all aspects of the physical and chemical properties of surfaces, including the adsorbed molecule conformation [6].
The aim of this paper is to obtain the relationship for calculation of the fractal dimension D for adsorption of gases and vapors on fractal surfaces of microporous materials.To achieve the goal, we shall solve the Dubinin's integral equation [1].

Theory
As mentioned in the introduction, Dubinin's integral equation [2] assumes to represent ( ) Here ( ) f l is the micropore size distribution function; l is the typical size (the characteristic width of slit-like micropores, or the radius of cylinder-like micropores); l min and l max denote the minimum and maximum values of l; k is an empirical constant and β is the similarity coefficient that characterizes the adsorbate.Equation ( 1) also contains the adsorption potential ( ) , where ΔG is the Gibbs potential, p 0 and p denote the saturation and equilibrium pressure of the gaseous adsorbate, respectively, R is the universal gas constant, T is the absolute temperature.The relative adsorption θ is defined as the ratio of the amount a of the adsorbate in the micropores at the equilibrium pressure p to the maximum amount a 0 of the adsorbate in these micropores.The micropore adsorption capacity may be converted to the micropore volume.
To determine the function ( ) f l various methods for solution of the integral Equation ( 1) have been proposed.The most common solution can be obtained by the method of integral transformations-Fourier transform.However, this method of calculation is for the practical use very difficult.
V. V. Kutarov  f l The study of Equation ( 1) is carried out based on two approximations: 1) Preliminary assignment of the distribution function: where the fractal representation of the distribution function ( ) In formula (2) m is the similarity coefficient and D is the fractal dimension.
2) TVFM is based on the assumption that the values are min 0 l = and max l = ∞ .However, no rigorous physically sound evidence for this assumption has been provided [1,2].In what follows, we will carry out a study of Equation ( 1) taking into account both assumptions.Then Equation ( 1) should be rewritten as: ( ) which can be rewritten as follows: ( ) ( ) ( ) For analytical solutions of Equation ( 4) we make the following additional assumptions: 1) The quantity ( ) In Equation ( 4), the integrand has a sharp maximum.This determines the maximum value of ( ) ) for a given value of A; 3 Therefore, to solve Equation (4) one can apply the method of steepest descent, named also the "saddle point" method [7].Assuming that for the maximum of the integrand, in the vicinity of * l , the function ( ) , Equation ( 4) can be rewritten as follows: ( ) ( ) Equating the derivative of the integrand to zero, one can determine the value l * .

) Materials Sciences and Applications
From Equation ( 7) we find out the formula for determining the distribution function ( ) As stated above, the distribution function is defined as ( ) . Thus, on the basis of formulas (4b) and ( 8) and with the experimental values ( ) , T p θ and A one can determine the fractal dimension D as follows: ( )

Method of Tangents
However, as mentioned above, the replacement of finite limits of integration in Equation ( 1) is not properly justified.Equation ( 3) is written for an infinite range of the characteristic pore size.Therefore, Equation ( 8) is obtained based on the assumption of an infinite range of specific pore size.However, adsorbents contain pore sizes which vary over a finite range.Typically, the range of variation of the characteristic size of micropores is smaller than 2 × 10 −9 m.It would therefore be advisable to check the adequacy of formula (8) in an independent manner.
Let us rewrite (1) as follows: , exp For the representation of the experimental values ( ) , T p θ only one characteristic micropore size l n is taken.
( ) ( ) ( ) In the coordinates  , Equation (11) will be represented by a smooth continuous convex line.The bulge of the curve, determined by the condition of the characteristic size of micropores, decreases with increasing A.
To obtain the dependence ( ) for the set of experimental data determining the function (11), the tangential method is employed.The equation of the tangent to the curve ( )  can be re- presented as [8]:

T p T p T p A A A
where the subscript "0" indicates the nodes of the function.
Comparing Equations (11) and ( 12) one can find the parameters of the tangent function at the nodes (9): ) Materials Sciences and Applications ( ) Next, using formula (2) and the values obtained from formulae ( 13) and ( 14), one can determine the value of the fractal dimension D as follows: ( ) ( )
An analysis of the adsorption isotherm is conveniently carried out on basis of the t-plot.On the basis of the t-plot the adsorbed amount is shown on the ordinate axis and the thickness (t) of the adsorption film on the abscissa axis [14].
Figure 2 shows a t-plot of the adsorption isotherm.In a range of the value of the adsorbate relative pressure 0.6 < x < 0.95 (t > 1.5) the adsorption film is stable and t-plot is accordingly linear.
To differentiate the regions of multilayer formation and capillary condensation in greater pores we describe the isotherm by the equation considered by  Frenkel-Halsey-Hill (FHH) [14]: In Equation ( 16) b and α are the parameters of the FHH theory.In the FHH theory α has a value of 1/3 [15] for Euclidean surfaces.For a fractal surface α ≠ 1/3 [16].
In the analysis of the experimental data, isotherm Equation ( 16) is converted to the form: Figure 3 shows the adsorption isotherm of nitrogen on the coal sample in the coordinates of Equation (17).By analyzing Figure 3 one can determine the parameters of Equation ( 16) for the adsorption of nitrogen on the coal sample: a m = 1.15 ml/g; b = 1.53; α = 0.58.The film of condensate preserves its stability up to the saturation pressure.Such a mechanism of adsorption is characteristic for slit-shaped pores.Now consider the determination of the fractal dimension of the carbon sample by nitrogen adsorption (Figure 1).BET value was determined as a T = 1.15 ml/g.The adsorption in micropores takes place in the interval 1.15 ml/g < a ≤ 1.84 ml/g, which corresponds to a pressure range of 0.1 < x < 0.6, with x = p/p 0 .
To determine the value of the fractal dimension from ( 9), a segment of the experimental isotherm for 0.07 < x < 0.6 is represented in the coordinates: ( )   behaviour of the adsorption system with x = 0.1 (the leftmost point (1) in Figure 4) and x = 0.6 (the rightmost point (6) in Figure 4).A straight line is found for the region of 0.1 < x < 0.6, which corresponds to 0.072 < θ ≤ 0.94.The point (θ = 0.072; x = 0.1) is not a point of the straight line, built by Equation ( 18).Therefore, near x = 0.1, the quantity D takes a negative value, since in a close vicinity of x = 0.1, θ = 0.072 cannot be considered on the basis of the fundamental theory VFM.In this area there is a logarithmic divergent behavior of the adsorption potential energy of the system [14].For the region (θ > 0.94; x < 0.6) of the isotherm in coordinates of (18) the slope of the straight line is much greater than of the isotherm with a plot interval 0.072 < θ ≤ 0.94.In the vicinity of this point the value of D is greater than 3. Therefore, calculations of the fractal dimension D in the vicinity of θ = 0.07 and θ = 0.94, based on the formalism of TVFM, is incorrect.Thus, the proposed method for calculation of the fractal dimension D, based on the solution of the integral (3) is strictly valid for 0.1 ≤ θ ≤ 0.9.Using formula (9), the value of D is calculated to 2.47.Materials Sciences and Applications Figure 7 shows a segment of the micropore adsorption isotherm in the coordinates lnθ vs ln(A −1 ).Then formula 14 determines the value of the fractal dimension to D = 2.37.Likewise, we calculated the value of the fractal dimension D for the remaining three isotherms.Table 1 shows the values of fractal dimensions for the four considered isotherms.
The values of D were derived by two methods: 1) in the framework of a rigorous theory (TVFM), which involves the use of infinite limits in the integral (3); 2) as part of the integral equation for the adsorption isotherm with finite limits of integration.The table shows that the results for the fractal dimension D, calculated by both methods, differ insignificantly.At the same time, the value of the fractal dimension D, calculated by the first method for all four cases is greater than D calculated by the second method.This can be explained by the fact that changes in the limits of integration extend the range of the distribution function ( ) f l , as it was shown by Gauden [17], too It is important to stress that both methods, proposed in the article, equally determine the behavior of the distribution function and the singular points.

Conclusion
Equations derived in this paper permit the estimation of fractal dimension for gas adsorption on microporous solids.These experimental results are interpreted in terms of the filling of micropores and fractal micropore-size distribution.That means that the fractal dimension in this case describes the space filling behavior of the fractal structure or rather the fractal dimension of the pore network.Values for the fractal dimension usually are between 2 and 3 and here mean values are received.Because these equations are obtained on the basis of the Dubinin's integral equation (Equation ( 1)), which contains an empirical exponential expression, which describes adsorption in uniform micropores, the calculated quantities depend on the correctness of the Dubinin's equation.

) 4 )
The function of density distribution ( ) In the neighborhood of * l the function ( ) f l has a constant value equal to the value ( ) * f l .
[10] [11] [12][13].Coal samples, lunar soil and rice starch are layered structures.For such adsorbents micropores have a slit-like shape[1] [14].Samples of the Davisil F silica are treated as adsorbents with pores of spherical or cylindrical shapes[10] [14].In the analysis of the adsorption process it is convenient to use the proportion of pore width l to the Van-der-Waals diameter of the adsorptive molecule σ.For slit-shaped pores volume filling in the pores occurs in the interval 1

Figure 2 .
Figure 2. t-plot for the adsorption isotherm of nitrogen on coal sample ZC6.

18) in Figure 4 .
Here a m and a 0 are the adsorption values on the left and right boundary, respectively, in the micropore region.The maximum amount of adsorbate in micropores corresponds to the adsorption value on the right boundary in the micropore region.Having analysed Figure 1, one should pay attention to the following singular V. V. Kutarov et al.DOI: 10.4236/msa.2017.88042609 Materials Sciences and Applications

Figure 3 .
Figure 3. Adsorption isotherm of nitrogen on coal sample ZC6 in the coordinates of Equation (17).

Figure 4 .
Figure 4. Adsorption isotherm of nitrogen on coal sample ZC6 in the coordinates of Equation (18).

Figure 7 .
Figure 7. Adsorption isotherm of nitrogen on coal sample ZC6 in the coordinates of Equation (13).
et al.