A Finite Element Analysis on MHD Free Convection Flow in Open Square Cavity Containing Heated Circular Cylinder

The problem of Magnetohydrodynamic (MHD) free convection heat transfer in a square open cavity containing a heated circular cylinder at the centre has been investigated in this work. As boundary conditions of the cavity, the left vertical wall is kept at a constant heat flux, bottom and top walls are kept at different high and low temperature respectively. The remaining side wall is open. Finite element analysis based on Galerkin weighted Residual approach is used to visualize the temperature distribution and fluid flow solving two-dimensional governing mass, momentum and energy equations for steady state, natural convection flow in presence of magnetic field in side an open square cavity. A uniformly heated circular cylinder is located at the centre of the cavity. The object of this study is to describe the effects of MHD on the thermal fields and flow in presence of such heated circular cylinder by visualization of graph. The investigations are conducted for different values of Rayleigh number (Ra) and Hartmann number (Ha). The results show that the temperature field and flow pattern are significantly dependent on the above mentioned parameters.


Introduction
The presence of magnetic field on the convective heat transfer and the natural convection flow of the fluid are of paramount importance in scientific and engineering research.Several numerical and experimental methods have been developed to investigate flow characteristics inside the cavities with and without obstacle.Because these types of geometries have practical engineering and industrial application, this type of problems of heat transfer attract significance attention of researchers since it's numerous application in the areas of energy conservations, cooling of electrical and electronic equipments, design of solar collectors, heat exchangers, etc.Many researchers have recently studied heat transfer in enclosures with partitions, fins and block which influence the convection flow nature.It is difficult to solve free convection problem in complicated bodies like it, which greatly influences the heat transfer process.A related application of MHD acceleration is to produce high energy wind tunnels for simulating hypersonic flight.
In the present work, we studied MHD free convection heat transfer and flow in a square open cavity containing a heated circular cylinder.The left vertical wall is kept at a constant heat flux.Bottom and top walls are kept at different high and low temperature respectively.The remaining side wall is open.Finite element analysis based on Galerkin weighted Residual method is used to solve the problem.Using the set of boundary conditions and values of parameters, it is observed that all isotherm lines are concentrated at right lower corner of the cavity and the magnetic field affects the heat flux inversely in the cavity.
Chan and Tien [1] investigated shallow open cavities and made a comparison study using a square cavity in an enlarged computational domain.In the result, they observed that for a square open cavity having an isothermal vertical side facing the opening and two adjoining adiabatic horizontal sides.Satisfactory heat transfer results could be obtained, especially at high Rayleigh numbers.Mohammad [2] investigated inclined open square cavities, by considering a restricted computational domain.The gradients of both velocity components were set to zero at the opening plane in that case which were different from that of Chan and Tien [1].In the result, he found that heat transfer was not sensitive to inclination angle and the flow was unstable at high Rayleigh numbers and small inclination angles.
Ostrach [3], Davis [4], Hossain and Wilson [5], Hossain et al. [6] and Sarris et al. [7] studied MHD natural convection in a laterally and volumetrically heated square cavity.Their results show that the effect of increasing Hartmann number was not found to be straight forward connected with the resulting flow patterns.Roy and Basak [8] analyzed finite element method of natural convection flows in a square cavity with non-uniformly heated wall(s).S. Pervin and R. Nasrin [9], (2011) studied MHD free convection and heat transfer for different values of Rayleigh numbers Ra and Hartmann numbers Ha in a rectangular enclosure.Their results show that the flow pattern and temperature field are significantly dependent on the used parameters.Sheikh Anwar Hossain and Alim [10] studied Effects of Natural Convection from an open square cavity containing a heated circular cylinder.S. Saha [11] studied thermo-magnetic convection and heat transfer of paramagnetic fluid in an open square cavity with different boundary conditions.His results show the Effects of Magnetic Rayleigh number, Prandtl number on the flow pattern and isotherm as well as on the heat absorption graphically.He found that the heat transfer rate is suppressed in decreased of the Magnetic Rayleigh number.
The study related to heat absorption or rejection in the confined rectangular enclosures has been well discussed in the literature C. Taylor and P. Hood [12], Chandrasekhar [13], Dechaumphai [14].
However, a comparatively little work has been done in the case of open square cavities.The reason might be the complexity on using the boundary conditions at the open side.The terms magneto hydrodynamic, hydrodynamics, magneto gas dynamics and magneto aerodynamics all are the branches of fluid dynamics that deals with the motion of electrically conducting fluids in presence of electric and magnetic fields.In a magnetic field the moving electric charge carried by a flowing fluid velocity and acting in the opposite direction, it is also very small.So the influence of the magnetic field on the boundary layer is exerted only through induced forces within the boundary layer itself, with no additional effects arising from free stream pressure gradient.

Physical Model
A schematic diagram of the system considered in the present study is shown in Figure 1.The system consists of an open square cavity with sides of length L and heated circular cylinder of diameter D is located at the center of the cavity.A Cartesian co-ordinate system is used with origin at the lower left corner of the computational domain.A constant heat flux q is considered at the left wall of the cavity.The bottom wall is kept high temperature T h and top wall is kept at low temperature T c .The remaining right side wall is open.The temperature at the cylinder T h1 is less than that of the bottom wall.A magnetic field of strength B 0 is applied horizontally normal to the side walls.

Mathematical Formulation
The governing equation of MHD natural convection is given by the differential equation expressing conservation of mass or continuity equations, conservation of momentums and conservation of energy.In this case, flow is considered as steady, laminar, incompressible, two-dimensional and the buoyancy force.The Boussinesq approximation is used to relate density changes to temperature changes in the fluid properties and to couple in this way the temperature field to the flow field.The steady natural convection can be governed by the following differential equations.

h T x y T =
At the right side & open side: Convective Boundary Condition (CBC), p = 0. where x and y are the distances measured along the horizontal and vertical directions respectively; u and v are the velocity components in the x and y direction respectively; T denotes the temperature in Kelvin scale of measurement; γ and α are the kinematic viscosity and the thermal diffusivity respectively; p is the pressure and ρ is the density.

Governing Equations in Non-Dimensional Form
We can nondimensionalize the governing equations using the following scales.

Numerical Technique
The numerical technique used in this study is based on the Galerkin weighted residual method of finite element formulation.The application of this technique is well described by Tailor and Hood [12] and Dechaumphai [14].
Here the solution domain is discretized into finite element meshes, which are composed of non-uniform triangular elements.Then, the nonlinear governing partial differential equations (i.e.mass, momentum and energy equations) are transferred into a system of integral equations by applying the Galerkin weighted residual method.In this case, the integration over each term of these equations is performed by using Gauss's quadrature method and nonlinear algebraic equations are obtained.These nonlinear algebraic equations are modified by imposing boundary conditions.These modified nonlinear equations are transferred into linear algebraic equations by using Newton's method.At last, these linear equations are solved by using triangular factorization method.

Results and Discussion
Finite element simulation is applied to perform the analysis of laminar free convection heat transfer and fluid flow in an open square cavity containing a heated circular cylinder.Effects of the parameters Rayleigh number (Ra), Hartmann number (Ha) and heat flux q on heat transfer and fluid flow inside the cavity has been studied.The visualization focused on temperature and flow fields, which contains isotherms and streamlines for the cases.The range of Ra and Ha for this investigation vary from 10 3 to 10 4 and 0 to 400 respectively while Pr = 0.72 & heat flux q = 100.
The flow with all Ra in this work has been affected by the buoyancy force.3 shows the effects for Ha = 100, 200, 300, 400 on isotherms as well as on streamlines for the present configuration at Ra = 10 3 , q = 100.In this case, the isothermal lines are concentrated at the right corner of the bottom side.In Figure 3(b), a recirculation is formed around the cylinder and one small vortex is formed below the cylinder in the cavity for Ha = 200, 400.The recirculation region is decreased for Ha = 400.Figure 4 shows the effects of Ha = 75, 150, 225, 300 on isotherms as well as on streamlines for the present configuration at Ra = 10 3 , q = 100.In Figure 4(b), a recirculation is formed around the cylinder at every Ha and one small vortex is formed in the cavity for Ha = 225.In Figure 4(a), the isothermal lines are concentrated at the right lower corner of the cavity for all Ha. Figure 5 shows the effects for Ha = 0, 100, 200 & 300 on isotherms as well as on streamlines for the present configuration at Ra = 10 4 , q = 100.In Figure 5(b), a recirculation is formed around the cylinder for every Ha.The recirculation region is increased for Ha = 100.The isothermal lines are concentrated at the right lower corner of the cavity for every Ha. Figure 6 shows the effects for Ha = 100, 200, 300, 400 on isotherms as well as on streamlines for the present configuration at Ra = 10 4 , q = 100.In Figure 6(b), a recirculation is formed around the cylinder at every Ha and one small vortex is formed below the cylinder for Ha = 200.The recirculation region is increased for Ha = 200, 400.The isothermal lines are concentrated at the right corner of bottom side for every Ha. Figure 7 shows the effects of Ha = 75, 150, 225 & 300 at Ra= 10 4 and heat flux q = 100.In this case, the isotherm lines are concentrated at right lower corner of the cavity for every Ha and the isotherm lines are located in the right half of the cavity.A recirculation is formed around the cylinder for every Ha.One small vortex is formed below the cylinder for Ha = 225.The recirculation region is increased for Ha = 75.The isothermal lines are concentrated at the right corner of bottom side for every Ha. Figure 8 shows the effects for Ha = 80, 160, 240 & 320 on isotherms as well as on streamlines for the present configuration at Ra = 10 4 , q = 100.Here, isotherm lines concentrate at lower right corner of the cavity for every Ha.In Figure 8, on small vortex is formed for Ha= 240, 320.One recirculation is formed around the cylinder for every Ha.
To evaluate how the presence of magnetic field affects the heat flux along the heated surface it is observed in the figures from Figures 9-11 that Hartmann number inversely affects on heat flux.That is heat flux is maximum when Ha is minimum.If Ha rises then heat flux decreases.Figure 11 shows that heat flux is highest when Ha is lowest, because the magnetic field tends to retard the fluid motion.

Figure 1 .
Figure 1.Schematic diagram of the problem.
q = 100 w/m 2 , p = 0.At the right side & open side: Convective Boundary Condition (CBC), P = 0.The Nusselt number for natural convection is a function of the Grash of number only.The local Nusselt number Nu can be obtained from the temperature field by applying the function The overall or average Nusselt number was calculated by integrating the temperature gradient over the heated wall as follows: Since the dimensionless Prandtl Number Pr is the ratio of kinematic viscosity to thermal diffusivity.So Pr is a heat transfer characteristics in the flow field of natural convection.

Figures 2 (
a)-8(a) illustrate temperature field in the flow region and in Figures 2(b)-8(b) illustrate streamlines in the flow field.In Figures 2(a)-8(a), the high temperature region remains below the circular cylinder and the isothermal lines are nonlinear for all Ra used in this work and they occupied almost right half of the region in the cavity.The influence of Ha = 0, 75, 150, 225 on isotherms as well as on streamlines for the present configuration at Ra = 1000, q = 100 has been demonstrated in Figure 2. In Figure 2(b), a recirculation is formed around the cylinder and one small vortex is formed below the cylinder in the cavity for Ha = 225.The recirculation region is decreased for Ha = 150.For this case, isothermal lines are concentrated at the right corner of bottom side.

Finite
element method is used to solve the present physical problem and analyze the effects of Hartmann number Ha, Rayleigh number Ra, heat flux q for steady-state, incompressible, laminar and MHD free convection flow in a square open cavity containing a heated circular cylinder.The flow with all Ra in this work has been affected by the buoyancy force.Temperature fields are illustrated in the flow region.The high temperature region remains (a) (b)

Figure 9 .
Figure 9. Line graph of heat flux at upper wall for Ha = 75,225 & Ra = 1000.

Figure 10 .
Figure 10.Line graph of heat flux at the cylinder for Ha = 75,225 & Ra = 1000.