Thermal Behavior and UV Properties of Organomodified Kaolin Oleochemically Derived from Rubber Seed Oils (<i>Hevea brasiliensis</i>) and Tea Seed Oils (<i>Camellia sinensis</i>)

Kaolin was 
modified using a chemical complex of hydrazine hydrate and oleochemical sodium 
salts derived from rubber seed oil (SRSO) and tea seed oil (STSO) respectively. 
Characterization of the pristine kaolin and the modified kaolins were performed 
using Scanning Electron Microscopy (SEM), Simultaneous 
Thermogravimetric/Differential Thermal Analysis (TG/DTA) and UV 
Spectrophotometry. TG/DTA revealed that 
the incorporation of the oleochemical salts enhanced thermal decomposition of 
kaolin into metakaolin. Ultraviolet spectrophotometric studies conducted on the 
modified kaolin show for the first time that the SRSO-modified kaolin and 
STSO-modified kaolin have a peak absorbance 
wavelengths of 312.72 nm and 314.26 nm respectively. This shows that the 
modified kaolin is a promising candidate for sunscreen applications.


Introduction
Kaolin is ubiquitous and has wide range of applications, in various fields of science, due to the propensity with which they can be chemically and physically modified to suit practical technological needs.They are used in ceramics, medicine, paper coatings, as a food additive, in toothpaste, as a light diffusing material in white incandescent light bulbs, and in cosmetics.It is generally the main component in porcelain.It is also used in paint production to extend titanium dioxide (TiO 2 ) and modify gloss levels; in rubber for semi-reinforcing properties; and in adhesives to modify rheology [1].Kaolin can be consumed to suppress hunger and for pleasure in some parts of the world, a practice known as geophagy [2].
The empirical formula for kaolin is Al 2 Si 2 O 5 (OH) 4 and the theoretical chemical composition is SiO 2 , 46.54%; Al 2 O 3 , 39.50%; and H 2 O, 13.96%.Kaolin has a 1:1 sheet structure comprising of tetrahedral and octahedral sheets.It is made up of tiny, thin, pseudo hexagonal, flexible sheets of triclinic crystal with a diameter of 0.2 -12 μm.It has a density of 2.1 -2.6 g/cm 3 .The cation exchange capacity of kaolin is in the order of 2 -10 meq/100 g, depending on the particle size, but the rate of the exchange reaction is rapid, almost instantaneous.Upon heating, kaolinite starts to lose water at approximately 400˚C, and the dehydration approaches completeness at approximately 525˚C.The dehydration depends on the particle size and crystallinity [3].
The research of intercalation of organic molecules into the interlayer space of clay minerals started in the 1920s, after the introduction of X-ray diffraction in 1913 [4].
The most known compounds that intercalate directly with kaolin are polar organic molecules such as fatty acid salts, hydrazine hydrate, dimethylsulphoxide (DMSO), formamide, potassium acetate and urea.They are reported in the literature as having the ability to disrupt the interlayer bonding between the adjacent siloxane and hydroxy aluminum surfaces and to penetrate the interlayer space to form a complex by hydrogen bonding to both surfaces [5].Other compounds can also be introduced in the kaolinite layers by the displacement of a previously intercalated compound [6][7][8][9].Detailed studies on the intercalation of kaolin and highly polar organic molecules such as amides and sulphoxides were reported [10][11][12].
Several reports have been made on the suitability of oleochemical sources of rubber seed oil and tea seed oil to be used as precursors for organic modification of kaolin and the following characterization studies: Differential Thermal Analysis (DTA), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD) performed on the modified kaolin [13][14][15][16].
Until now, there are not many reports on the thermal behavior and UV properties of modified kaolin from oleochemical sources.
This paper discusses the results obtained from morphological studies using SEM; thermal analysis and possible degradation mechanism of organomodified kaolin from oleochemically derived Sodium salts rubber Seed oil and tea seed oil obtained by simultaneous TG/DTA and the UV properties of the modified kaolin obtained from UV-vis-spectrophotometer.In this article, the morphology and thermal behavior of the pristine kaolin were also discussed.

Materials
Kaolin (BCK grade) used in this study was obtained from M/s. English Indian Clays Ltd, Veli, Thiruvananthapuram, Kerala, India.Rubber Seed Oil (RSO) and Tea Seed Oil (TSO) were obtained from National Institute for Interdisciplinary Science and Technology, India.Sodium hydroxide (MERCK), hydrazine hydrate (FINNAR) were obtained from local suppliers.The kaolin, RSO and TSO has the following chemical composition determined by chemical analysis, as reported in Table 1.

The Synthesis of SRSO-Modified Kaolin
Kaolin was slowly added to a mixture-containing of SRSO and hydrazine hydrate in the ratio 4.9:1:3.5 with vigorous stirring at 20˚C.The mixture was homogenized well using Art-MICCRA D-8 (Germany) homogenizer, and the sample was dried using a freeze drier [Hetro-Trap-CT60e, JOUAN].The sample was designated as K2.

Conversion of TSO into its Sodium Salt
Sodium salt of tea seed oil (STSO) was synthesized by reacting 28 mL of TSO with 27 mL of 20% NaOH in an ice bath with constant stirring for 12 hours and kept for 1 day to allow for curing to take place.The pH of the resulting solution was maintained at 8 -9.STSO was then introduced into a separating funnel and washed with water to remove excess base.This was then dried in a hot air oven to remove residual moisture and powdered.

The Synthesis of STSO-Modified Kaolin
Kaolin was slowly added to a mixture-containing of STSO and hydrazine hydrate in the ratio 4.9:1:3.5 with vigorous stirring at 20˚C.The mixture was homogenized well using Art-MICCRA D-8 (Germany) homogenizer and the sample was dried using a freeze drier [Hetro-Trap-CT60e, JOUAN].The sample was designated as K4.

Scanning Electron Microscopy
The pristine and organomodified kaolin were examined using JEOL JSM-5600 LV Scanning Electron Microscope at a magnification of 15,000 ×.

Thermogravimetric/Differential Thermal Analysis
The dehydration process and weight losses of pristine and organomodified kaolins were studied by simultaneous Ther-mogravimetric/Differential Thermal analysis (TG/DTA) in which the clays are subjected to a temperature scan from 50.00˚C to 995.00˚C at the rate of 10.00˚C/min in the presence of oxygen at 20.0 ml/min using the Perkin Elmer STA 6000 for Simultaneous Thermal Analyzer.

UV-Vis-Spectrophotometric Studies
The spectrophotometer (SHIMADZU UV-1601, Tokyo, Japan) was used for the UV-visible spectrophotometric studies.Figures 1-3 show the SEM micrographs of the pristine kaolin, the SRSO-modified kaolin and the STSO-modified kaolin at a magnification of 15,000 ×.In Figure 1, the pristine kaolin SEM micrograph revealed the platelet hexagonal structure of the kaolinite crystals.

Scanning Electron Microscopy
In Figure 2 the SRSO-modified kaolin has a compact platelet morphology with delaminated layers which shows the presence of organic material (organomodification) in the kaolin.The STSO-modified morphology in Figure 3 clearly shows the presence of organic material in the kaolin matrix.The STSO-modified kaolin has farinaceousdelaminated layers indicating an intercalation with organic material.Two major decomposition steps can be deduced from the TGA plot of Kaolinites (see Stages 1 and 2 below): For the SRSO-modified kaolin, the visible two stage decomposition occurs at 235˚C -580˚C for the first stage and 705˚C -1000˚C for the second stage.Similarly, in the STSO-modified kaolinites, the first stage decomposition occurs at temperatures 240˚C -342˚C while the second stage occurs at 585˚C -1000˚C.It was observed that the thermal decomposition of kaolin is lowered on organomodification.The decomposition rate of the STSO-modified kaolin was faster compared to the pristine and the SRSO-modified; this may be due to the low specific gravity of the Tea seed oil.Figures 4-7 shows the TG/DTA plots of the pristine kaolin, the SRSOmodified Kaolin and the STSO-modified Kaolin.The   thermic mass loss at 50˚C -200˚C due to moisture loss.The major endothermic mass loss of the pristine kaolin was observed in the temperature ranges of 450˚C - 550˚C.The minimum weight loss occurs at 530˚C; this agrees with the result of a previous work by Sukumar and Menon [13].The endotherm temperature of 530˚C represents the loss of structural hydroxyls by dehydroxylation (or alternatively, dehydration) producing highly reactive metakaolin.Dehydroxylation process continued up to 900˚C which may be attributed to oxolation of the metakaolin [17,18].The exothermic peak at around 1000˚C is due to the crystallization of the amorphous metakaolinite [19][20][21][22].In Figure 5, the DTA profile for the SRSO-modified kaolin shows an endotherm in the temperature range 500˚C.This lower exothermic temperature is due to the presence of an impurity phase attributed to the SRSO.The peak at 270˚C is attributed to the combustion of the hydrocarbon part of SRSO and this proves the existence of SRSO in the interlayer spacing of the kaolin.The low endotherm temperature of 500˚C represents the loss of structural hydroxyls by dehydroxylation producing highly reactive metakaolin.The exothermic peak at around 1000˚C is due to the crystallization of the amorphous metakaolinite.

Thermogravimetric/Differential Thermal Analysis
In Figure 6, the DTA profile for the STSO-modified kaolin shows an endotherm in the temperature range 515˚C.This lower exothermic temperature is due to the presence of an impurity phase attributed to the STSO.The peak at 290˚C is attributed to the combustion of the hydrocarbon part of STSO and this proves the existence of STSO in the interlayer spacing of the kaolin.The low endotherm temperature of 515˚C represents the loss of structural hydroxyls by dehydroxylation producing highly reactive metakaolin.The exothermic peak at around 1000˚C is due to the crystallization of the amorphous metakaolinite.

UV-Vis Spectrophotometric Studies
The UV studies were conducted by using the pristine kaolin dissolved in distilled water as the baseline refer-ence.The SRSO-modified and STSO-modified kaolin samples were then studied to know the absorbance within the UV range of 200 -800 nm.The SRSO-modified kaolin has a peak absorption (λ max ) wavelength of 312.72 nm while the STSO-modified has a peak absorption (λ max ) wavelength of 314.26 nm.The modified kaolin can be used in sunscreens as a UV absorber.They can absorb Ultaviolet B (UVB) which is the medium range from 315 -280 nm with energy per photon values of 3.94 -4.43 eV [23].

Conclusions
The SEM morphologies of the modified kaolin show that there was intercalation of the organic substance in the kaolinite layers.The dehydroxylation of the kaolin was enhanced by modification to yield metakaolin.The enhancement in the decomposition time and temperature of the modified kaolinite could be as a result of decrease in the electrostatic attraction between the lamellae due to intercalation.An industrial treatment of kaolin with fatty acid salts is recommended.This will enhance the thermal decomposition of the kaolin and optimum yield of metakaolin which is classified as a new generation of supplementary cementitous material.Metakaolin is usually produced by thermal treatments, i.e., calcination of kaolin clays within a definite temperature range.Metakaolin is unique in that it is neither the by-product of an industrial process nor is it entirely natural; it is derived from a naturally occurring mineral, and it is manufactured specifically for cementing applications [24].
The results from this study also show that the modified kaolin is a potential candidate for sunscreen applications as a UV absorbance.The modified kaolin has the advantage of being non-toxic and from oleochemical sources.
Thermal Behavior and UV Properties of Organomodified Kaolin Oleochemically Derived from Rubber Seed Oils (Hevea brasiliensis) and Tea Seed Oils (Camellia sinensis)