MARSZUG—A Space Train for Regular Delivery of Astronauts onto Mars

A project of the space train MARSZUG intended for regular delivery of astronauts to Mars is considered. In the first stage of the flight, the astronauts with the help of the carrier rocket equipped with a chemical rocket engine are delivered to the international space station (ISS). To deliver astronauts from Earth’s orbit to Mars orbit, a space train design consisting of two rockets, which have superconductive magnetoplasma electric engine MARS, has been developed. For the first time, a combined propulsion system MARS-M has been developed for the train movement, allowing carrying out the pitching, yaw and rotation of the rocket. This greatly simplifies the rocket control system and increases its reliability. The energy source of the electric engines is a sliding solar panel made of gallium arsenide. Working substance to create reactive thrust of electrorocket engines—hydrogen is stored in a liquid state in the cryogenic tank located along the longitudinal axis of the rocket. In the nasal part of the front electric rocket, a shaft rotating in a superconductive bearing is located. The shaft has a cylindrical nozzle, on which with the help of docking units two takeoff-landing capsules TLC-1 and TLC-2 are installed with which help landing and takeoff from the surface of Mars is carried out. This allows astronauts to constantly stay during the flight under the influence of gravity. To refuel the space train with liquid hydrogen in the orbit of Mars, the design of a space refueler with a chemical rocket engine is developed. The developed space train is able to regularly deliver astronauts to the surface near the northern pole of Mars.


Introduction
Exploration and mastering of Mars still remains a priority for astronomy and astronautics.
It's time for intensive exploration of Mars with the help of spacecrafts.
Currently, up to ten automatic interplanetary stations (AIS) are orbiting as artificial satellites around the planet Mars. There are two rovers operating on the surface of Mars, to which another rover with a lifespan of 10 years is expected to be added in 2021 [1].
In recent years, the most successful one was the flight of the "Phoenix" spacecraft, which has landed on the surface near the north pole of Mars in 2008 and has got water from the Martian soil [2]. At the same time, an expedition to the surface of Mars still remains an unattainable dream.
The reason for this is that today there is no spacecraft, in which a person can reach the surface of Mars and safely return to the native Earth.
The creation of a technical device capable of delivering astronauts to Mars must be admitted as the most important scientific and technological challenge facing humanity. Therefore, the development of a space train for the regular delivery of astronauts to Mars is the subject of scientific and designer research carried out in this work.
It should be recalled that today NASA continues its long-term work on the creation of a spacecraft for astronauts' flight to Mars. In 2017, a new program was adopted, which provides for the creation of super-heavy rocket carriers SLS with a payload capacity in the Earth's orbit of 130 tons [3].
In the NASA project, the SLS spacecraft retains a traditional design that uses a combination of chemical rockets operating on liquid and solid fuel using oxygen as an oxidizer.
The program provides for implementation of the successive missions.
Mission 1 is an unmanned flight of the "Orion" capsule to the lunar surface until 2020. Mission 2 is to be implemented with the help of the created block 1 in 2023. At the same time, the expedition of four astronauts should be landed on the surface of the Moon.
Further plans of NASA are related to the development and creation of a spacecraft for the flight to Mars, whose propulsion device will be a bundle of chemical rocket engines type RS-25.
The spacecraft should be placed in unit 2, in the head part of the SLS rocket. It will be the most powerful rocket ever built.
The first launch of such a rocket is expected to carry out in 2045.
As a result, in the middle of the 21st century, finally, there will be created the technical device capable of delivering to Mars that one astronaut can stay on the surface for several days.
The estimated duration of the expedition from the time of take-off from the A. Rubinraut Advances in Aerospace Science and Technology spaceport at Cape Kennedy to the splashdown of the Orion capsule in the Pacific Ocean will be 540 days [3]. It should be noted that NASA's SLS spacecraft does not provide for the creation of artificial gravity in the cabin of astronauts during interorbital flight. But such a long stay in weightlessness can have severe consequences for the health of the crew members of the expedition.
Determining the cost of the expedition today is quite a complex task. But undoubtedly it will be the most expensive space-rocket complex ever created at NASA. In order to get rid of these shortcomings and solve the problem of ensuring the regular delivery of astronauts to the surface of Mars, the author decided to go another alternative way, providing for the use of electric rocket en- gines.
An analysis of NASA's SLS spacecraft flight project has shown that the trajectory of the flight towards Mars consists of three sections, at each of which the gravitational field differs significantly in the value.
At the first section of the trajectory: the Earth's surface and the Earth's orbit, the spacecraft overcomes the force of gravity of the Earth. In this section, chemical rocket engines should be used.
At the second section of the trajectory: the orbit of the Earth and the orbit of Mars the flight of the rocket spacecraft takes place in the conditions of weightlessness. The use of chemical rocket engines in this case is irrational. Because the specific pulse of the chemical rocket engine is 400 seconds, while the electric rocket engine has specific pulse of 8000 sec. To reduce the consumption of the working substance during interorbital flight, electric rocket engines should be installed on the spacecraft.
At the third section of the trajectory, when the spacecraft remains in orbit of Mars, and the spacecraft, a takeoff-landing capsule with astronauts on board is under the influence of the gravity of Mars, and a chemical rocket engine should be used.
The design calculations have shown that in order to solve the problem of regular delivery of astronauts to the Mars surface with minimum flight time it is advisable to divide the process into two stages.
In the first stage, a carrier rocket equipped with a chemical rocket engine will deliver astronauts to the International Space Station. For this purpose, the project uses the Atlas V carrier rocket with space capsule STS 100 Starliner developed by Boing.
In the second stage, a space train should be developed with which help flights between the Earth's orbit and the orbit of Mars are carried out.
At the interorbital space train, the electric rocket engines and two takeoff-landing capsules should be installed.
This will allow the performing movement of 10 astronauts from the ISS moorage at the Earth orbit, to land on the surface of Mars, to take off from the surface of Mars and to carry out return flight from Mars orbit to the ISS moorage.
At the same time, there is no need to create an expensive rocket carrier, and the time of flight from Earth's orbit to the orbit of Mars is reduced to 40 days. The development of a space train project to regularly deliver astronauts to Mars is the goal of this work.
This work is a continuation of the design and development work of the expedition to the north pole of Mars, which was performed in 2019 [4].
To create a scientific research base (SRB) on the surface near the north pole of Mars, a space refueler and a mobile solar battery are delivered there. The space refueler melts water ice on the surface of Mars and uses an electrolyzer and a liquefier to produce fuel and oxidizer for operation of the chemical rocket engine of the takeoff-landing capsule [4].
A constantly functioning refueling station that produces liquid hydrogen and liquid oxygen can be successfully used to refuel tanks-cryostats of the space train in Mars orbit.
The new concept of refueling a space train in Mars orbit does not require the preliminary flight of the cargo space train, which delivers the working substance to work electric motors during the return flight of the expedition to Earth orbit.
This significantly reduces the cost of regular delivery of astronauts onto Mars.

The Concept of Delivering Astronauts to Mars with the Help of Space Train "MARSZUG"
To deliver astronauts from Earth's orbit to the surface of Mars, in the project a space train called "Marszug", the general view of which is shown on Figure 1, is developed.
The abbreviated name of the train is MZ. The space train MZ is being formed in the Earth orbit of the International Space Station (ISS) from two rockets with electric rocket engines.
The front electric rocket 1, which will be designated by the index MZ-1, and the rear electric rocket MZ-2 have design differences.
The rockets are equipped with electric rocket superconducting engines of type MARS. The source of electricity for the engines is a solar battery made of gallium arsenide. Working substance to create a reactive thrust of electro-rocket engines is hydrogen, which in a liquid state is stored in a cryogenic tank located along the longitudinal axis of the rocket. The front rocket 1 and the rear rocket 2 when the train is formed are connected to each other with the help of docking unit 5. The space train has a constructive feature. In the nasal part of the front electric rocket 1 there is a rotating shaft with a cylindrical nozzle 6 at the end. The cylindrical nozzle is performed with two external docking units located along the cross-axis.
These docking units are used to dock the takeoff-landing capsules 3 and 4.
When a space train reaches the orbit of the planet Mars, its separation takes place. Takeoff-landing capsules 3 and 4 using chemical rocket engines 10 and 11 separate from the space train and land on the icy surface of the north pole of Mars. The description of the design of the takeoff-landing capsule is given below. Let's follow the delivery process of astronauts to Mars and their return to Earth. Regular delivery of astronauts to Mars should be carried out when the permanent scientific research base (SRB), the description of which is given in [4] is already functioning on the surface. At the SRB, a group of 8 astronauts works, during 22 months of their stay, are conducting scientific researches.
The SRB is located on the icy surface near of the northern pole with coordinates are 85 degrees/330 degrees. The SRB is equipped with everything necessary to provide astronauts working with measurement equipment under a special program. Already after the first expedition, the solar panel works on the ice surface as a permanent source of electricity. There is also a space refueler, which produces oxygen and hydrogen from water for refueling chemical rocket engines 10 and 11 of the takeoff-landing capsules 3 and 4.
In addition, during the previous expedition onto the surface of Mars another space refueler was delivered capable to take off from the surface of Mars, go into orbit around Mars and dock with the space train MZ. After refilling the tankscryostats of the space train with liquid hydrogen, the refueler returns to the base with the help of a parachute and the chemical rocket engines. A detailed description of the orbital space refueler is given below.
The SRB is equipped with the installation of a special life support complex "Iglus" that protects astronauts from cosmic radiation and negative effects of the atmosphere and creates comfortable conditions during a long stay in space [5].
The SRB has a device for movement along the icy surface of Mars, manufactured by the firm "RR" [6]. Developers: Engineers of Londoner Royal College.
At the disposal of astronauts is also a spacecraft-a mars rover, able to move towards any point on the surface of Mars, the description of which is given in the [4].
The regular delivery of astronauts to Mars consists of several stages. The first stage is movement of astronauts to the ISS. It is carried out with the help of two Atlas V rocket carriers, in the head part of which the spacecraft "Orion" is installed.
The group consists of 8 astronauts-researchers of various specialties and two astronauts-machinist which will control the train while driving. After successfully movement from the Earth's surface, the astronauts are waiting for the start Advances in Aerospace Science and Technology of the space train being at the ISS.
The second stage of the movement towards Mars begins with the assembly of the space train MZ in the orbit of the ISS where with the help of the rocket carrier "Delta Heavy" at first the front orbital module MZ-1 and then the rear orbital module MZ-2 are delivered. The operation is carried out automatically. Using electric rocket engines 8 and 9 the modules MZ-1 and MZ-2 are approaching together.
Using the docking unit 5, the module MZ-1 is connected with the module MZ-2. The launching of the takeoff-landing capsules TLC-1 and TLC-2 in ICC orbit is carried out. For this purpose the Delta Heavy rocket carrier is also used.
After entering the orbit of the ISS, the space takeoff-landing capsules TLC-1 and TLC-2 are heading for moorages of the ISS.
After taxiing the TLC-1 and TLC-2 automatically dock with the moorages of the ICC.
The first machinist-astronaut with the crew of four astronauts moves from the ISS to the cabin of TLC-1 (4) and takes its place at the control desk. The second astronaut-machinist, along with a crew of four, moves from the second moorage of the ISS inside MIC-2 (3) and takes its place at the control desk. The assembly of the space train continues. The takeoff-landing capsules are detached from the ISS moorages. The command is given, and the TLC-1 capsule with the help of the chemical rocket engine 10 ( Figure 1) begins to move towards the space train from the site of the docking unit 6 ( Figure 1) in the nasal part of the rocket MZ-1. After docking of TLC-1 with the MZ-1 rocket, the same operation carries out the second astronaut-machinist, who controls TLC-2 (3) with the help of chemical rocket engine 11.
As a result of the rapprochement and docking, TLC-2 is connected to the docking unit 6. This completes the process of the space train MZ assembling in orbit around the Earth.
Of course, this operation of space train assembling should be pre-worked out and entrusted to the machinists-astronauts of the highest qualifications.
After the space train assembling, the first astronaut-machinist switches on artificial gravity systems in the cabins of TLC-1 and TLC-2.
The shaft, on which the docking unit 6 ( Figure 1) is located, begins to rotate in the superconducting bearing with frequency of 5 rpm.
The description of the artificial gravity system is given below. The third stage begins: the movement of the space train from the Earth's orbit to the orbit of Mars.
In the design of the space train MZ the trajectory of its movement from the Earth's orbit to the orbit of Mars was calculated. The calculation was carried out with the help of an astrodynamic program, which determines the gravitational field in the space between the orbits of Mars and Earth.
In so doing, at any given time the power interaction of the Sun, Earth, Moon, Venus and Mars is taken into account, when changing their mutual position in the solar system.

A. Rubinraut Advances in Aerospace Science and Technology
The space train is the object of the variable mass, as its electrorocket engines continuously throw out the working substance-hydrogen. At the same time, when the train is moving, there is a continuous decrease in the thrust of electric rocket engines due to the reduction of solar batteries power when the train moves away from the Sun. The calculation program takes into account the change in the thrust of the electrorocket engines using the method of successive approximations.
The initial part of the movement trajectory passes from point 0 in Earth's orbit to point 1' in Mars orbit (Figure 2).   Once the maximum speed has reached, the power of solar panels is reduced from 3.2 MW to 2.4 MW. The mass of the space train is reduced from 70 to 45 tons. The first astronaut-machinist switches off the electric rocket engines and the space train goes into mode of movement on inertia during 9 days.
In 29 days after the start of the movement, the train makes at 180 degrees U turn. The movement in braking mode along the calculated trajectory begins.
The power of solar panels supplying power for electric motors has decreased to a magnitude of 1.8 MW.
In braking mode, the train is during 12 days, while its the speed reduces from 60 km/sec to 4 km/sec.
On the 40th day after the start of the flight, the space train reaches Mars and enters its orbit.
The space train is now at point 1' (Figure 2). One turn around Mars train makes for 90 minutes, being at the distance of 120 km from the surface of Mars.
With the help of electrorocket engines 8 and 9 ( Figure 1) the first machinist-astronaut directs the space train to the north pole of Mars, near which the research base (SRB) is located. The space train orbits Mars at the latitude of 330 degrees.
When approaching the point with the coordinates of 85˚/330˚, the astronautmachinist receives signal of the beacon which is on the surface of Mars near the SRB. The command on undocking of the space train and the TLC-1 comes, and TLC-1 (Figure 1) moves off the space train.
Then the astronaut-machinist switches on the chemical rocket engine 11 and the TLC-1 (3) goes into braking mode.
The space train continues to move around Mars, and the TLC-1 (3) reduces its speed to 3.5 km/s. In doing so, the capsule 3 loses weightlessness and rushes towards the surface of Mars with an acceleration of 0.38 g. At the altitude of 20 km above the surface of Mars, the TLC-1 parachute system is activated. Using the chemical rocket engine 11, astronaut-machinist smoothly lands the capsule on the surface of Mars. In 80 minutes after landing of the TLC-1, the space train approaches the landing site again. The second machinist-astronaut, which controls the TLC-2, undocks the docking unit 6 (Figure 1), connecting the TLC-2 (4) with the space train. Then, with the help of the chemical rocket engine 10, TLC-2 departs from the space train and heads for in braking mode towards the Mars surface.
With the help of the parachute system and chemical rocket engine 10, a smooth landing of the TLC-2 on the surface of Mars takes place.
Astronauts who arrived at the SRB are being housed in the living quarters of the base and, after adaptation, begin their work according to the planned program. It is supposed that the astronauts, who have to leave the base and return to Earth, have carried out all the necessary preparatory works.
With the help of refueler and solar panel, at the SRB the necessary amount of working substance to operate chemical and electric rocket engines to move from Mars' orbit to Earth orbit has been prepared. These are hydrogen and oxygen, Under the guidance of machinists, a team of astronauts at first refuels the chemical rocket engines 10 and 11 of capsules (Figure 1). Then the team begins refueling with the working substance the electric rocket engines 8 and 9, which are in Mars orbit. The refueling of electric rocket engines is carried out with the help of a space refueler, whose cryogenic tank is filled with liquid hydrogen. The space refueler has a chemical hydrogen-oxygen engine that puts it into the orbit of Mars, where it connects with the space train in automatic mode.
With the help of a cryogenic pump, liquid hydrogen is pumped into tankscryostats of the space train. After refueling, the space refueler returns to the base with the help of a chemical rocket engine and parachute.
A detailed description of the space refueler design is given below. For the first time, the process of refueling tanks with a working substance was considered by the author when designing an expedition to Jupiter in 2015 [7].
The transfer of the watch to the new crew of the expedition lasts 14 days. A team of 10 astronauts leaves the permanent scientific research base. The departing astronauts are housed in cabins of TLC-1 and TLC2.
The first machinist-astronaut gives the command for takeoff and switches on the chemical rocket engine 10 ( Figure 1). TLC-1 takes off from the launch pad of the SRB and in 170 seconds, and goes into the orbit of Mars, along which the train MZ is moving. The first machinist-astronaut controls the TLC-1, carries out a rapprochement and docking with the docking unit 6.
The second machinist-astronaut which is by control panel of the TLC-2, switches on the chemical rocket engine 11 (Figure 1), TLC-2 takes off and enters the orbit of Mars, along which the space train MZ is moving. TLC-2 connects with a space train using docking unit 6. This is where the assembly of the MZ train in Mars orbit ends. The interorbital flight from the Mars orbit to the Earth's orbit begins.
The first astronaut-machinist switches on the artificial gravity system in the cabins of astronauts, which are in the TLC-1 and TLC-2 capsules. The first astronaut-machinist then switches on electric rocket engines 8 and 9 (Figure 1). The speed of the space train MZ reaches of 5 km/s. After that, the train leaves Mars orbit and heads for planet Earth.
Let's trace by means Figure 2 and Figure 3, how this process progresses. The trajectory of the space train passes between the orbits of Mars and Earth. At Figure 2 one can see, that during the MZ train stay on Mars orbit, Mars has moved from point 1' to point 2'.
The orbital flight takes place along the train's trajectory from point 2' in Mars orbit to point 3 in the Earth orbit. The speed of the space train at the beginning of the movement continuously increases and after 25 days reaches 60 km/s. (Figure 3). At the same time, the power of electrorocket engines increases from 1.6 to 2.5 MW. Advances in Aerospace Science and Technology The project of the space train MZ has provided for determination of the cost of delivering astronauts to Mars. Four launches of the Delta IV Heavy rocket carrier, which cost is 600 million dollars, should be carried out every two years.
Delivery of astronauts to and from the ISS will require two launches of the Atlas V rocket carrier at a cost of 200 million dollars. The estimated cost of the space train is 800 million dollars. The estimated cost of the working substance refueller is $100 million. In accordance with the technical task, the space train is designed for three times the use. The projected estimated cost of one train flight with 10 astronauts on board will be $700 million.

Structure of the Space Train "MARSZUG"
The design of the train is shown on Figure 4 1) The front orbital module MZ-1.

Design of Combined Superconducting Electrorocket Engine Type MARS-K
It should be recalled that the electrorocket engine of type MARS was invented by the author in 2006 [9]. In 2017, the project of the electric motor was considered and calculated researches were carried out, which showed that the developed design will allow creating an electric rocket engine with a high efficiency factor for space trains that deliver astronauts to the planets of the solar system [10].  Inside the working chamber 2 there are two flat electrodes-anode 3 and cathode 4. The electric field inside the working chamber 2 is created when the voltage on the anode and cathode is applied. To create a magnetic field inside the working camera 2, a magnetic system is used, which is already installed to create the traction force on the longitudinal axis of the electric motor.
The magnetic field in the space at the end of the electric motor is created by the solenoid 1, made of superconductor and placed in cryostat 10 with liquid hydrogen.
The working substance of the end flat electric motor is a gaseous hydrogen, which is supplied in the working chamber 19 (Figure 7), which has rectangular output nozzle 20. After a voltage is applied to electrodes 4 and 5, the working substance is ionized and an electric current arises. When the current interacts with the magnetic field in accordance with the law of the Ampere, the force F, ejecting hydrogen ions from the working chamber through the nozzle 20, arises.
Force F creates a reactive thrust in the direction of the transverse axis, which rotates the space train relative to the longitudinal axis. The working camera of the additional electric rocket engine has a casing on its outside ( Figure 6).
Design of the main electrorocket engine is shown at Figure 6.
12, 13-supply of the working substance through the channels of the sleeve.
3-swivel joint of solar panels.
4-external casing of the rocket.
5, 6-longitudinal axial beams of solar panel assembly. Figure 9 shows the cross-section of the rocket along the front end shield, on which the electrorocket engines are installed.
1-tank-cryostat to store the working substance. Filled with liquid hydrogen.
2-front end disk made of carbon.
3-output nozzle of the electric rocket engine, which creates the thrust along the longitudinal axis.    Table 1.
The parameters of the electrorocket engine, which creates the traction force of rotation ( Figure 6 and Figure 7) are shown in Table 2. Figure 10 shows the design of the rocket MZ-1 case.

The Design of the Rocket MZ-1 Case
1-outer shell of the case made of carbon.
4-solar battery panel made of gallium arsenide.  Figure 10. Design of the rocket MZ-1 case. 7-the outer case of the superconductor bearing of artificial gravity system.
9-end nozzle with docking unit to connect the train with the TLC-1.

10-rear end shield.
A. Rubinraut 11-cryogenic pump to pump liquid hydrogen into the tank-cryostat. 12-pipeline to feed hydrogen into electrorocket engine. 13-docking unit to connect the rocket MZ-1 with the rocket MZ-2. 14-docking unit to connect the train with TLC-2. 16, 17-hinge joint of solar assembly panels. The mass of the rocket MZ-1 on Earth-27 tons and the mass of the rocket MZ-2-25 tons.

The Design of the Artificial Gravity Creation System with the Help of a Superconductor Bearing
Artificial gravity in the astronauts' cabins of the TLC-1 and TLC-2 takeoff-landing capsules is created under the influence of centrifugal force when the capsules are rotating relative to the longitudinal axis of the MZ train.
A new constructive solution of the bearing 7 Figure 10, which works on the Meisner effect, has been found. The design of the superconductor bearing is shown on Figure 11.
The bearing consists of moving and fixed cylindrical sleeves mounted along the train's axis.
Rotating part 1 is separated from the stationary part 2 by an end clearance 3.
On the rotating part 1 with the help of a protruding shaft 4 the cylinder 5, made of a monolithic superconductor-the compound yttrium-barium is set. Outside cylinder 5 a shell 6, made of non-metallic material is located. On the stationary part 2, with help of the sleeve 7 the cylinder 8 is fixed which consists of a set of permanent magnets with alternating polarity.
Permanent magnets are made from the compound iron-neodymium-boron. On the end flanges of the cylinder 8 the magnets 9 and 10 are set, transmitting axial forces.
When the bearing works, liquid hydrogen is fed into the gap between the rotating cylinder 5 and the cylinder 8.
Once cooled, the cylinder 5 becomes superconducting, and the magnetic field created by the constant magnets 8, 9 and 10 does not penetrate inside the cylinder 5. This creates a lifting force that steadily holds the rotating part of the bearing 1 on the horizontal axis. Figure 11. Design of the superconductor bearing. Advances in Aerospace Science and Technology The fixation of rotor 5 on the longitudinal axis is carried out with the help of a stationary superconducting electromagnet 11, which has a ferromagnetic core 12.
Thanks to the magnetic interaction of the stationary and rotating part, the superconductor bearing shown on Figure 11, has no loss of energy on friction, which provides minimal energy consumption to create artificial gravity in the astronauts' cabin.

The Takeoff-The Space Landing Capsule (TLC) of Train MARSZUG
The capsule is designed to move five astronauts from Earth's orbit to Mars orbit and back into Earth orbit. The design of the TLC is shown on Figure 12.
1-Chemical hydrogen-oxygen rocket engine with thrust of 20 ton and specific pulse of 400 seconds.
2-The bottom of capsule rocket case.
7-Cabin crew of the expedition.
8-Superconducting solenoid to create a magnetic field that protects astronauts from the flow of charged particles.
9-Docking unit to connect with the shaft of the superconducting bearing.
10-Tunnel and gateway to get out of the rocket. 11-Parachute system for capsule landing on the surface of Mars.
13-Power ring of the landing tripod.  11-Computerized engine control system for take-off from the Mars surface, entering the orbit of Mars and dock the refueller with the space train.
12-Parachute to brake the refueler when landing on the surface of Mars. 13-Power ring of the landing tripod. 14 -The landing upright damper. 15-The shoe of the landing upright. 16-Cryostat tank bottom. The mass of the refueller on Earth-25 t. Length-14 m External diameter-6 m.

Conclusions
1) A complex of works on the creation of a space train MARSZUG for regular delivery of astronauts to the planet Mars has been performed.
2) The design of the space train, which is formed in the orbit of the Earth by docking of individual modules being delivered by existing rocket carriers, has been developed.
3) The movement from Earth orbit to Mars orbit is carried out with the help of the combined system of superconductive electric magnetoplasma engines MARS-K, which provides the usage of solar energy to create thrust with maximum efficiency.
4) The new design solution with two takeoff-landing capsules allows delivery to Mars 10 astronauts which are located in the cabins equipped by the system of artificial gravity and magnetic protection against cosmic radiation. The time duration of the space train movement between orbits will be 40 days.

Conflicts of Interest
The author declares no conflicts of interest regarding the publication of this paper.