Near Field Microwave Holography for Bio-Tissue Imaging

This study investigated the ability of microwave holography to accurately reconstruct the tissue structure of the human body. Numerical breast and head phantoms were imaged by 3D near-field holography using backscattered waves obtained by a monostatic planar scan. Complex organizational structures have been reconstructed accurately and quickly. In addition, breasts with relatively simple histology could be reconstructed without the matching liquid.


Introduction
Detection technology for breast cancer or brain strokes, based on microwave imaging, has been widely studied because it has no exposure, allows frequent examinations, and is relatively inexpensive as type of equipment [1] [2]. Typical imaging methods include scattering tomography [3], which solves the inverse scattering problem to obtain the complex permittivity distribution in the object, and ultra-wideband (UWB) radar, which evaluates the scattered power distribution in the object using wideband signals [4]. The former has the ability to accurately reconstruct the tissue image. However, it is essential to accurately model an actual measurement system on a computer, and achieving this realistically is difficult [5]. In addition, since the complex permittivity distribution in the tissue is updated by Newton's method, full wave electromagnetic field analysis is repeatedly performed, requiring a significant amount of calculation [6]. Hence, rapid image reconstruction is difficult. Usage of UWB radar for imaging is relatively easy to realize, and clinical trials for breast cancer detection are being conducted by several research institutions, including my institution. However, the reconstructed image does not reflect the morphology of the tissue [4] [7] [8], thereby making it difficult to clinically determine the presence or absence of cancer. Hence, it has not been put to practical use.
In recent years, research on wavefront reconstruction (direct holography) based on synthetic aperture radar has progressed, and its application to the detection of breast cancer is also being considered [9]. Microwave imaging by direct holography can reconstruct a tissue image, and calibration using a point scattering function [10] does not require accurate modeling of the imaging system on a computer. Moreover, since the image reconstruction processing is based on the Fourier transform, image reconstruction can be performed in a short time close to real time. Since it is based on the Fourier transform, a high frequency is inevitably required due to the sampling theorem in order to achieve high resolution, and there exists the concern of attenuation in a living tissue. However, there are several reports stating that image reconstruction is possible even with a relatively low Signal to Noise Ratio (SNR) [11].
This study presents an image reconstruction algorithm using near-field holographic imaging. Since [9] is based on far-field holographic imaging, the fidelity of the reconstructed image is insufficient despite the use of a matching liquid. In addition, there are no examples of faithful reconstruction of the tissue structure in the skull. We demonstrate that a monostatic radar that captures backscattered waves in a planer scan can accurately reconstruct 3D tissue tomographic images of the breast and head in a short time by the use of near field holographic imaging.

Near Field Microwave Holography for 3D Imaging
The forward problem of the scattering phenomena is expressed by the following Equation (1) using the linear Born approximation.
Here, sc E , Ĝ , inc E , k s and k b denote the scattering field, dyadic Green function, incident field, wave number of the object, and that of the background, respectively. Then, V Q , position vector r p and r Q denote a volume to be inspected, position of the observation and scattering. Assuming planar scanning, the contrast distribution of a region represented by a plurality of cross sections parallel to the scanning plane is estimated. Here, , , , , , , , The two-dimensional Fourier transform on both sides of Equation (2) is Here,

( )
, , , We approximate the integral in Equation (5) with the discrete sum of z.
where, Δz is the distance between two adjacent reconstruction planes. Considering the frequency dependence of the medium, it is assumed that the contrast function can be expressed by, Taking the two-dimensional Fourier transform of (x, y) on both sides of Equation (7) with respect to x and y, where, is the two-dimensional Fourier transform of ( ) , , h x y z with respect to (x, y). Writing (6) and (8) We obtain the least-squares solution of this system of equations and find ( )

Use of the Measured Point Scattering Function
In general, the incident field and Green's function data are obtained by simulation, but due to modeling and numerical calculation errors, it is difficult to be implemented practically. It has been proposed to obtain products of the incident field and Green's function specific to the measurement system by measuring a known calibration object (CO). This method uses the concept of point scattering function (PSF), in which the response due to an arbitrary target is convolved with the response due to point scatter (CO).
When a sufficiently small non-dispersion medium CO exists at (0, 0, z n ), the Open Journal of Medical Imaging contrast function of Equation (3) After solving Equation (17) for all values of κ , the inverse Fourier transform of ( ) is performed, and the contrast function ( ) , , n f x y z is reconstructed.

Bio-Tissue Image Reconstruction
Tomographic imaging has been performed on the numerical breast and head phantom using the method detailed in Section 2. The antenna uses a half-wave length dipole, and the length is set to resonate at the center frequency of the band. As shown in Figure 1, the imaging system is a monostatic radar that uses the same antenna for reception and transmission, and scans the antenna within a plane facing the measurement target. The resolution of the reconstructed image is 2 mm. The breast phantom was created based on the MRI images of cancer patients. The data from [12] was used for the construction of the head phantom.

Breast Imaging
The measurement frequency range is 2 -16 GHz, and the distance between the scanning plane and breast is 50 mm. Scattered fields were obtained in 2 mm of the numerical breast phantom and a reconstructed tomographic image. Despite the absence of matching fluid, the breast tissue structure is accurately reconstructed. The time required for calculation and display of the reconstructed image was only 1.8 s on a personal computer equipped with an i7-6700k CPU and 32GB RAM.

Head Imaging
The measurement frequency range is 1.1 -21 GHz and the distance between the scanning plane and head is 50 mm. Scattered fields were obtained in 2 mm steps within the plane, with a 228 × 228 mm range. The CO with a size, relative permittivity and conductivity of 2 mm 3 , 60, and 2, respectively, was moved from 2 to 100 mm in 2 mm steps at (x, y) = (0, 0) mm to obtain the measured PSF. In this application, it is difficult to reconstruct the image without the matching liquid. The relative dielectric constant and conductivity of the background was set to 25 and 0.75, respectively. Figure 3 depicts a tomographic image of the real part of the complex permittivity of the numerical head phantom and a reconstructed tomographic image. The inner tissue of the head is accurately reconstructed. The time required for the calculation and display of the reconstructed image was 7.7 s. Open Journal of Medical Imaging

Conclusion
A numerical breast phantom and head phantom were imaged by 3D near field holography using the backscattered waves obtained by the monostatic planer scan. Reconstruction of the complex tissue structure could be accurately and rapidly achieved. In addition, breasts with relatively simple histology can be reconstructed without the matching liquid. Since the image reconstruction in this method is based on the principle of the Fourier transform, it is necessary to acquire wideband scattering data at several observation points. It is difficult to form an array considering the realistic antenna aperture area, and mechanical scanning is a practical concern. Obtaining the data is a time consuming process. Therefore, it must be to examine how to collect the scattering field rapidly. We also need to evaluate the adequacy of applying the Born approximation. While solving these problems, we will continue to develop medical imaging equipment using the microwave holography.