Prof. Mohammad Reza Allazadeh
Hungarian Academy of Sciences, Budapest
Hungary
Email: mrallazadeh@gmail.com
Qualifications
2009 Ph.D., University of
Pittsburgh, Mechanical Engineering and Material Science
2004 M.Sc., Brown
University, Providence, Engineering Division
1999 M.Sc., University of
Miskolc, Mechanical Engineering
Publications (Selected)
-
Mohammad Reza Allazadeh, "Analytical Solutions for Cutting Mechanism: Applicable in Metallic
Materials and Rocks", LAP, LAMBERT Academic Publishing
GmbH & Co. KG, ISBN: 978-3-8454-3910-5, (2011).
-
Mohammad Reza Allazadeh, “COOLING RATE OPTIMIZATION FOR QUENCHING AS-CAST STEEL IN INDUSTRY:
INTRODUCING A TECHNICAL ROAD MAP TO OPTIMIZE THE COOLING RATE OF THE AS-CAST
STEEL PRODUCED BY CONSCIOUSLY CAST STEEL METHOD”, VDM
Publishing House, ISBN-13: 978-3639316612, (2010).
-
Mohammad Reza Allazadeh, “Using small Specimens technique in Nuclear Pressure Vessel survey:
Studying Crack Propagation of Steel Used in Nuclear Pressure Vessel Using Small
Specimen Technique”, VDM Publishing House, ISBN-13: 978-3639217186,
(2009).
-
Balaban E., Ouenniche J., and Politou D., “A Note On Return
Distribution of UK Stock Indices”, Applied Economics Letters, 12, 9,
573-576, (2005)
-
Mohammad Reza Allazadeh, “Cooling rate optimization of as-cast
consciously cast steel”; IJMSE, Vol. 9, No. 3, (September 2012).
-
Allazadeh M. R., Itani K Maher, and Wosu Sylvanus N.,
"Characterization of Compressive Damage Behavior of Steel and
Aluminum", Journal of Materials Science Research, Vol. 1, No.
1, (January 2012).
-
Turan Fatih, Allazadeh Mohammad R., and Wosu Sylvanus N., "
Effects of the Loading Direction on High Strain Rate Behavior of Woven",
Journal of Materials Science Research, Vol. 1, No. 2, (April 2012).
-
Turan Fatih, Allazadeh Mohammad R., and Wosu Sylvanus N.,
"Effect of the Contact Geometry on High Strain Rate Behavior of Woven
Graphite/Epoxy Composites", Journal of Materials Science Research, Vol. 1,
No. 1, (January 2012).
-
Allazadeh M. R., and Garcia C.I., “An FEM technique to study
residual stresses developed in continuously cast steel during solid-solid phase
transformation”, Ironmaking and Steelmaking: Processes, Products and
Applications, Vol. 38, No. 6;DOI: 10.1179/1743281211Y.0000000046. ISSN
0301-9233, Online ISSN: 1743-2812, (August 2011).
-
Allazadeh M. R. and Wosu Sylvanus N., "High Strain Rate
Compressive Tests on Woven Graphite Epoxy Composites”, Chemistry and Materials
Science, Applied Composite Materials, Vol. 18, No. 4, 311-325, DOI:
10.1007/s10443-010-9159-6, (August 2011).
-
Allazadeh M. R. and Wosu Sylvanus N., " High Strain Rate
Compressive Tests on Wood”, Strain, An international Journal for Experimental
Mechanics, STRAIN, DOI: 10.1111/j.1475-1305.2010.00802, (January 2011).
-
Allazadeh M. R., Garcia C. I., DeArdo A.J., and Lovell M. R.,
“Analysis of Stress Concentration around Inclusions due to Thermally Induced
Strain to the Steel Matrix”, Journal of ASTM International, Vol. 6, No. 5, (May
2009).
-
Allazadeh M. R., Garcia C.I., Alderson K.J., and DeArdo A.J.,
“Using NDT Image Processing Analysis to Study the Soundness and Cleanliness of
Accelerated Cooled Continuously Cast Steel Slabs”, Advanced Materials &
Processes, Vol. 166, No. 12, 26-27, DOI: 10.1361/amp16612p26, (December 2008).